User's Manual

ManualsBrandsGlobal Sun Technology ManualsComputers & AccessoriesHighSpeed 2.4GHz Wireless USB Adapter

GL-2454MU-0I

Quick Installation Guide

1. Package Content

● GL2454MU-0I USB Wireless Adapter

● CD-ROM

● Mini USB Cable

If any of the above items is missing, please immediately contact your dealer.

2. System Requirements

● A PC system ( desktop or laptop) with an available USB port

● At least 32MB memory and a 300 MHz processor

● OS: Windows 98SE; Windows ME; Windows 2000; Windows XP

● A wireless access point (infrastructure mode) or another wireless (Ad-Hoc mode)

3. Installation Quide

1. Turn on your computer and insert the CD in the CD-ROM driver. Follow the

instruction shown on the pop-up windows: choose destination location. Select

your CD-ROM driver.

2. The pop-up window will show the setup status during the installation.

3. Once it is done, the system will ask if you like to re-start the computer

immediately. Please press YES.

4. At the meantime or after the restart, please connect the USB cable A type into the

USB port on your PC.

5. Connect the mini USB with the Wireless USB adapter as well.

6. Then, the Windows will install the driver automatically.

7. The utility icon will appear once you have installed the driver. It will be shown

in green if the installation is successful.

Summary of content (5 pages)

PAGE 1
GL-2454MU-0I Quick Installation Guide 1. Package Content ● GL2454MU-0I USB Wireless Adapter ● CD-ROM ● Mini USB Cable If any of the above items is missing, please immediately contact your dealer. 2. System Requirements ● ● ● ● A PC system ( desktop or laptop) with an available USB port At least 32MB memory and a 300 MHz processor OS: Windows 98SE; Windows ME; Windows 2000; Windows XP A wireless access point (infrastructure mode) or another wireless (Ad-Hoc mode) 3. Installation Quide 1. 2. 3. 4. 5. 6.
PAGE 2
GL-2454MU-0I Quick Installation Guide 4. Utility Configuration 4.1 Link Information Status: Displays the current connection state of the GL2454MU-0I. SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is set to default. Tx Rate: The default setting is Auto; Channel: The default setting is 6. Link Quality: Displays the wireless signal strength for the GL2454MU-0I wireless connection to the access point.
PAGE 3
GL-2454MU-0I Quick Installation Guide Access Point. In Ad Hoc mode, the channel must be manually set to the same channel for each wireless adapter Tx Rate: You can adjust the transmission rate to get the best signal possible depending on your usage and your environment. The Tx Rate will be determined automatically by signal strength. Default is set to Auto. Preamble: Select Long or Short Preamble.
PAGE 4
GL-2454MU-0I Quick Installation Guide The top section of the window displays the Available Networks. Scroll up and down the list and highlight the network to which you wish to connect. Click on the Connect button. Profiles: In the lower half of the screen, you can manage the profiles that you have created for the wireless network at home, at the office and in public places. Scroll up and down and highlight the profile that you wish to configure.
PAGE 5
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.