User Manual Walkie Talkies Model T38 ENGLISH INSTRUCTION
1 Instruction For Use This set includes 2 PACK walkie-talkie : there are communication devices which operate on 462MHZ. They come with 22 channels as well as back-lit LCD screen, enabling you to communicate over several kilometers free-of –charge(up to 6 KM in open areas). Note: Please read the user manual carefully before using the equipment and retain for future consultation! Specific Recommendations If you carry any kind of personal medical device, please consult a doctor before use.
2 Key Functions 3 Before Use the device 3.1 Removing the belt clip Before insert batteries into the device, first remove the belt clip latch away from the device. 3.2 Installing the Batteries 1, Slid down the battery compartment cover. 2, Insert 3* AAA batteries each walkie talkie(Not included) 3, Position the batteries according to the polarity making on the battery compartment. 4, After placing batteries into correct positions, replace the battery cover. 4 Using the device 4.
To increase the volume, press the Up ▲ button. And press the Down ▼ button to decrease the volume. Note: The volume level is display on the screen. 4.3 Low Battery Indication The device can detect the low battery level when the battery voltage goes low. When battery voltage is low, the battery icon will flash and a beep will be heard to indicate that the batteries need to be replaced. 4.4 Receiving/transmitting communications: The devices are in “Reception” mode when it is turned ON and no transmitting.
to choose form. You are free to choose one of the 38 available sub-channels. Due to filtering, these sub-channels will generally not be audible so they will note disturb the communication. 4.7 VOX (Hands free function) Press the MENU button three times, the current VOX setting will flash on the display and the VOX icon will display, Press UP▲ button to set the VOX sensitivity level between 1 and 3 level(level 3 is the high sensitive level).
Press the MENU button 5 times, “KO” will be displayed. Press the UP▲/Down▼ button disable the key tone ON/OFF. Press The PTT button to confirm your selection and return to the stand-by mode. 4.13 Roger Beep On/Off After the PTT button released, the device will send out a roger beep to confirm that have stopped talking. Press the MENU button 6 times, “RO” will be displayed. Press the UP▲/Down▼ button disable the roger beep ON/OFF.
5 Technical specifications Frequency 462 MHZ Channel number 22 channels Sub-code CTCSS 38 Transmission Power <0.5Watts Range Up to 6 Km in open fields Modulation type FM-F3E 6 FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
7 Channel and Frequency (MHz) USA (22CHS) Ch. 1 2 3 4 5 6 Frequency 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 Ch. Frequency 7 462.7125 8 467.5625 9 467.5875 10 467.6125 11 467.6375 12 467.6625 Ch. Frequency 13 467.6875 14 467.7125 15 462.5500 16 462.5750 17 462.6000 18 462.6250 Ch. Frequency 19 462.6500 20 462.6750 21 462.7000 22 462.