User's Manual

ManualsBrandsGlobal Link ManualsElectronics22 CH Combination FRS/ GMRS Transceiver

Congratulations on your selection of a quality XACT product. With proper care and adherence to the set-up and user

instructions in this Owner’s Manual, this unit will provide you with years of trouble-free service.

XACT is committed to providing quality products that fit your needs. We would like to have any comments or suggestions

you might have on this product. You may mail your comments to:

U.S. Electronics

105 Madison Avenue

New York, NY 10016

The M3X is the newest generation in personal two-way communications. The M3X is a lightweight, compact two-way

communication device that can be used to communicate with family or friends at parks, shopping malls, sporting events,

concerts – any indoor or outdoor activity.

Here are some of the features of this new two-way COMMUNICATOR:

• Pendant Style with Detachable Neck Band

• 22 FRS/GMRS Channels

• Up to 2.0 Mile Range

• Auto Squelch

• Auto Battery Saving

• Internal VOX

• Channel Scan

• 12 Hour AM/PM Time Clock

• Backlit LCD Display on COMMUNICATOR Mode

• Uses 3 AAA size Alkaline battery with Ni-MH battery capability (not included)

Please read this Owner’s Manual carefully to get the most out of your TWO-WAY COMMUNICATOR.

NOTE: The maximum range will vary depending on terrain and environment. Range will be greater in open fields. While

range is shorter within and around buildings or large structures. This unit may not ensure privacy of communication.

Safety Information :

Your wireless hand-held portable transceiver contains a low power transmitter. When the Push-to-Talk (PTT) key is

pushed it sends out COMMUNICATOR frequency (RF) signals. This devise is authorized to operate at a duty factor not to

exceed 50%.

In August 1996, The Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for

hand-held wireless devices.

Important Note: To maintain compliance with the FCC’s RF exposure guidelines, hold the transmitter and ANTENNA at

least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed away from the face.

If you wear the handset on your body while using the headset accessory, use only the manufacturer’s supplied BELT

CLIP for this product and ensure that the ANTENNA is at least 1 inch (2.5 centimeters) from your body when transmitting.

Use only supplied ANTENNA. Unauthorized antennas, modifications, or attachments could damage the transmitter and

may violate FCC regulations.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

FEATURES

FCC NOTICE

Summary of content (11 pages)

PAGE 1
FEATURES Congratulations on your selection of a quality XACT product. With proper care and adherence to the set-up and user instructions in this Owner’s Manual, this unit will provide you with years of trouble-free service. XACT is committed to providing quality products that fit your needs. We would like to have any comments or suggestions you might have on this product. You may mail your comments to: U.S.
PAGE 2
DISPLAYS 3 2 5 6 1 4 8 7 1. 2. 3. 4. 5. 6. Channel Number (1~22) – 7. 8. VOX – Indicates when unit is in VOX mode 9.
PAGE 3
BATTERY INSTALLATION Your M3X COMMUNICATOR uses 3 AAA size Alkaline battery. To install the battery: 1. Release the Battery Compartment Cover Latch located on the rear side of the unit, and remove the Battery Compartment Cover from the Battery Compartment. 2. Install the batteries into the Battery Compartment. Be certain to follow the correct battery orientation in the compartment. Installing the batteries incorrectly will prevent the unit from operating. 3.
PAGE 4
INSTALLING THE NECKBAND and BELT CLIP Your M3X COMMUNICATOR comes with a Neckband and Belt Clip to allow you to wear your COMMUNICATOR around your neck or clip it in your belt. To install the Neck Band, simply insert the Neck Band on top of the COMMUNICATOR and slide the Lock Switch into “Lock” position. To remove the Neck band, simply move the Lock Switch opposite the “Lock” position and gently pull the Neck Band away.
PAGE 5
USING THE COMMUNICATOR 1. Installing the battery will automatically turn-on the unit and proceeds to Watch Mode. 2. Enter to COMMUNICATOR Mode by pressing and holding the Power key for around 3 seconds. To exit COMMUNICATOR Mode, press the Power key for around 3 seconds while on COMMUNICATOR mode. 2. Check the battery condition on the display. 3. Adjust the volume to a comfortable level by pressing the UP or DOWN key (default).
PAGE 6
5. Exit the Menu mode to return to “normal” mode by pressing the Menu key briefly or by automatic time out for about 10 seconds after last key is pressed. Choosing a Channel Your M3X COMMUNICATOR has 22 channels you can use to talk to others. To choose a channel: 1. To enter or exit to COMMUNICATOR mode, press the Power key for about 3 seconds.
PAGE 7
The Auto Squelch Feature Your M3X COMMUNICATOR is equipped with an automatic squelch system that automatically cuts off weak transmissions and unwanted noise due to terrain conditions and range limitations. The Automatic Power Save Feature Your M3X COMMUNICATOR has a unique circuit designed to dramatically extend battery life. If it senses no transmission within 5 seconds, it automatically switches to the power save mode. The COMMUNICATOR can still receive transmissions in this mode.
PAGE 8
FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation Important: Changes or modifications to this unit not expressly approved by XACT could void your authority to operate this unit. Your COMMUNICATOR is set up to transmit a regulated signal on an assigned frequency.
PAGE 9
TROUBLESHOOTING SYMPTOMS No power Reception is weak Cannot change channels Range is limited Sound distortion problems SOLUTION • Check the batteries. Ensure that the batteries are installed properly. • The batteries may be weak. • Recharge your batteries by using the A/C Adapter Charger. • Your batteries may be damaged. Replace old batteries with new one • Press the UP key to increase VOLUME. • The receiving signal may be weak and/or out of range. • Check the antenna position.
PAGE 10
WARRANTY XACT Products One-year Limited Warranty This limited warranty sets forth all XACT Products responsibilities regarding to your M3X. There are no other expressed or implied warranties from XACT Products . Warranty Service Provided If you purchased the M3X unit new from a retail vendor, XACT Products warrants the equipment against defects in material and workmanship for a period of one (1) year from the original date of purchase. This warranty is in lieu of all other express warranties.
PAGE 11
Please retain your sales receipt, the carton, the packaging materials, and the printed materials. the original carton is the best shipping container for the M3X unit should you have to return it.