X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM Please log on to www.getxact.com for accessory & product information.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM SPECIAL FEATURES CONGRATULATIONS! You now own a quality XACTTM Communication product. If you follow the set-up, operation and care instructions in this Owner’s Manual, this unit will provide you with years of trouble-free service. XACT is committed to providing quality products that fit your needs. Please send us your comments and suggestions.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM COMMUNICATOR CONTROLS LCD SCREEN 3 5 1. Channel Number (1~22) – Changes from 1-22 as selected by user. 2. Transmit Indicator (TX) – Indicates unit is transmitting a signal. 3. Receive Indicator (RX) – Indicates unit is receiving a transmission. 4. Call Tone Transmission (CALL) – Indicates the unit is paging. 5. CTCSS Code Number (oF~38) – Changes from oF-38 as selected by user. 6.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM FCC NOTICE This device complies with Part 15 of FCC Regulations. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. Important: Changes or modifications to this unit not expressly approved by XACT Communication could void your right to operate this unit.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM FCC NOTICE Safety Information Your wireless hand-held portable transceiver contains a low power transmitter. When the Push-to-Talk (PTT/CALL) button is pushed it sends out radio frequency (RF) signals. This devise is authorized to operate at a duty factor not to exceed 50%. In August 1996, The Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless devices.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM GETTING STARTED Battery Installation: Your X33X COMMUNICATOR is powered by a Lithium-Ion BATTERY (included). To install and replace the BATTERY: 1. Release the BATTERY COMPARTMENT COVER LATCH located on the rear side of the unit, and remove the COVER from the BATTERY COMPARTMENT. 2. Install the Lithium-Ion BATTERY into the BATTERY COMPARTMENT. Be certain to follow the correct orientation in the compartment.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM GETTING STARTED Charging the BATTERY: Your X33X COMMUNICATOR comes with an A/C ADAPTER CHARGER to charge your Lithium-Ion BATTERY. To charge: 1. Lift the HEADSET/CHARGER JACK COVER located on the side of your COMMUNICATOR. 2. Connect the A/C ADAPTER CHARGER into an A/C wall outlet. 3. Insert the A/C ADAPTER CHARGER into the HEADSET/CHARGER JACK.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM GETTING STARTED Battery Level and Low Battery Operation In WATCH and COMMUNICATOR mode the Low Battery Level icon will not appear on the display unless the unit detects that the BATTERY LEVEL is low. The unit has a LOW BATTERY LEVEL icon which will blink when it detects a low BATTERY level in COMMUNICATOR mode and/or WATCH mode.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM GETTING STARTED Adjusting the WATCH BAND: Your X33X COMMUNICATOR is designed with a simple release button making it easy to remove it from your wrist. 1. Adjust the Watch Band on your X33X COMMUNICATOR until it is comfortable, by inserting the two Metal Studs of the strap into the appropriate holes. 2. To remove the X33X COMMUNICATOR from your wrist, Press the Release Button found at the top of the unit. 3.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM OPERATION 1. Installing the battery turns-on the COMMUNICATOR and activates WATCH mode. 2. Enter COMMUNICATOR mode by pressing and holding the POWER button for 3 seconds. To exit COMMUNICATOR mode, press the POWER button for 3 seconds. 3. Check for the LOW BATTERY LEVEL icon on the LCD Screen. 4. Adjust the Speaker Volume to a comfortable level by pressing the UP button (default).
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM OPERATION WATCH Mode: The X33X COMMUNICATOR functions as a digital watch while in this mode. 1. Install the battery and the COMMUNICATOR's LCD Screen will display the time in the WATCH mode. 2. Press the MENU button until a "beep" is heard and the displayed hour will "flash". Press the UP or DOWN button to scroll the hour and the "AM" or "PM" designator to the desired settings. 3.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM OPERATION COMMUNICATOR Mode: The X33X COMMUNICATOR functions as a two-way communication device while in this mode. 1. Press the MENU button for 3 seconds and a short "beep" followed by a long "beep" will be heard, the COMMUNICATOR's LCD Screen will quickly display all of the COMMUNICATOR's status icons, and the COMMUNICATOR will enter COMMUNICATOR mode and display the current channel. 2. Press the MENU button momentarily to enter the MENU mode. 3.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM OPERATION Changing Channels: The X33X COMMUNICATOR has 22 channels for communicating with others. To change the COMMUNICATOR's channels while in COMMUNICATOR mode: 1.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM OPERATION NOTE: Selecting a CTCSS Code of “oF” will disable the CTCSS feature. In order for other people to receive your transmission, they must be on the same channel and CTCSS Code you are currently using. Adjusting Speaker Volume (STANDBY/RECEIVE Mode): 1. Press the UP button to increase the Speaker Volume. 2. Press the DOWN button to decrease the Speaker Volume. 3.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM OPERATION Transmitting and Receiving a Signal: The COMMUNICATOR is continuously in RECEIVE/STANDBY mode when the unit is on, in COMMUNICATOR mode, and not transmitting. Changing the position of the COMMUNICATOR (or its ANTENNA) may increase the quality and range of the COMMUNICATOR's transmitted or received signals. 1. Press and hold the PTT/CALL button to TRANSMIT and the TX icon will appear on the LCD Screen (see "LCD Screen" for details). 2.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM OPERATION For greater privacy and convenience of hands-free transmission, use an Ear Bud (headset) with Microphone (see Accessory Order Form) when using VOX mode. Connecting the Ear Bud (Headset): 1. Set the COMMUNICATOR to VOX mode. 2. Lift the HEADSET/CHARGER JACK COVER located on the side of the COMMUNICATOR. 3. Insert the plug end of the Ear Bud into the HEADSET/CHARGER JACK.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:58 AM TROUBLESHOOTING PROBLEM No power Weak Reception Cannot change channels SOLUTION • Check the battery. Ensure that the battery is installed properly. • Battery may be weak. • Recharge your battery by using the A/C ADAPTER CHARGER. • Your battery may be damaged. Replace old BATTERY with a new Lithium-Ion BATTERY. • Press the UP • The receiving signal may be weak and/or out of range. button to increase VOLUME. • Check the ANTENNA position.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:58 AM TROUBLESHOOTING PROBLEM Range is limited Sound distortion SOLUTION • BATTERY may be weak. • Recharge BATTERY if the BATTERY LEVEL indicator is low. • Range varies depending on terrain and environment. • Open fields provide maximum range; steel/concrete structures, heavy foliage, and operation in buildings and in vehicles may significantly limit range. • Check the ANTENNA position.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:58 AM SPECIFICATIONS Channels Available 22 FRS/GMRS Channels and 38 CTCSS Codes Operating Frequency UHF 462.5500 - 467.7125 MHz Power Source 3.7v Lithium-Ion Battery (XB10) Output Power (TX) 0.3W ERP maximum Battery Life Varies per user Range About 1.5 Miles Channel (MHz) and CTCSS Code (Hz) Frequency Chart Channels 1 thru 14 transmit on FRS frequencies. Channels 15 thru 22 transmit on GMRS frequencies. Ch. Frequency Ch. Frequency Ch.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:58 AM CARE AND MAINTENANCE Damaged ANTENNA: Do not use any COMMUNICATOR that has a damaged ANTENNA. If a damaged ANTENNA comes in contact with the skin, a minor burn may occur. Important BATTERY Information: Only use the battery indicated in this manual. Using another type of battery may substantially reduce operating time.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:58 AM WARRANTY XACT Communication One-year Limited Warranty This limited warranty sets forth all XACT Communication responsibilities as they apply to your X33X COMMUNICATOR. There are no other expressed or implied warranties from XACT Communication.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:58 AM WARRANTY What To Do For Warranty Service During the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer from whom it was purchased. After thirty (30) days, the defective product should be returned to the authorized service center. The shipping address of the authorized service center is: XACT Communication CONSUMER CENTER C/O Southern Bonded Warehouse 7137 Southlake Parkway Morrow, GA 30260 Website – www.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:58 AM WARRANTY For your reference: Model Number __________________________________________________ Date of Purchase ________________________________________________ Name of Dealer _________________________________________________ Toll Free Customer Service Telephone Number 1-866-466-XACT (9228) FCC Licensing Information: Channels 1 thru 14 transmit on FRS frequencies. Channels 15 thru 22 transmit on GMRS frequencies.
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:58 AM styled for life Made in China BN www.getxact.