INSTALLATION / USER MANUAL CC15250TBX/R1 G1500072 (Full Feature module) G1500127 (Limited Feature module) 15” Std Brightness LCD monitor This technical literature is subject to change. Please contact NCR Display Engineering / GDS before designing product based on this information. This manual should be read in conjunction with Technical Specification SPE?????. This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited.
Contents FCC Notice (U.S. Only) .................................................................................................................. 3 Safety Instructions ........................................................................................................................... 4 Cleaning the LCD Colour Monitor.................................................................................................. 5 Controls ...........................................................................
FCC Notice (U.S. Only) FCC Class B – Applicable only to Limited Feature connections This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules.
Safety Instructions This model is a LCD display module for building into other equipment. It must be used for no other purpose. Read the Safety Instruction carefully and keep it for use later. Beware of all warning and instruction signs marked on the monitor. The monitor is designed as a display component for building into other equipment. It must be used for no other purpose. The chassis metalwork of the module must be properly bonded to the main earthing termination in Class I equipment.
Cleaning the LCD Colour Monitor 1. To clean the LCD panel: - Wipe the screen gently with a clean lens brush made of camel hair, or a soft, clean, lint free cloth. This is to remove dust and other particles without scratching the LCD panel. - If it is still not clean, then wipe with a damp lint free cloth and blow on it to dry. 2. Do not clean the panel with keton-type material (e.g. acetone), ethyl, toluene, ethyl acid, methyl, or chloride. These may damage the panel. 3.
On-Screen Display Menu Exit: Setup: Picture: This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublished Property of GDS (UK).
Colour: This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublished Property of GDS (UK).
OSD: This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublished Property of GDS (UK).
System After picture adjustments have been optimized, the settings are memorised automatically. The OSD menu will disappear after 10 seconds of inactivity (timeout adjustable through the OSD menu) or the OSD can be exited by selecting EXIT. • • Brightness: regulates the overall level of white light viewable on the screen. Contrast: controls the range between black and white of the image on the screen. This document and information herein is the property of Global Display Solutions Ltd.
Specifications LCD Panel: 15” AUO G150XG01 V1 Brightness: 350 cd/m2 typical Contrast: 700/1 typical Active Display: Horizontal: Vertical: Video Signal: Analogue RGB (0.7Vp-p positive into 75Ω) Digital DVI 24 Pin Female (If fitted) Sync signal: Separate LVDS sync. Mechanical Dimensions: 346 (W) x 263 (H) x 43 (D) mm Weight: 2.0 Kg Temperatures: Operating temp: Storage temp: 304.1mm 228.
Pin Assignments – Limited Feature Connections Signal - Analogue: 15 way HD VGA connector Pin 1 2 3 4 Function Red video Green video Blue video Monitor ID bit 2 Pin 9 10 11 12 Function +5V supply (DDC) Sync ground Monitor ID bit 0 SDA (DDC data) 5 6 7 8 Ground Red video ground Green video ground Blue video ground 13 14 15 Horizontal sync. Vertical sync.
Pin Assignments – Full Feature Connections (not to be used) Signal – Digital: 24 way DVI Female connector (If fitted): Pin 1 2 3 4 Function DATA2DATA2+ DATA2/4_SHLD DATA4- Pin 13 14 15 16 Function DATA3+ +5V GND H_PLUG_DET 5 6 7 8 9 DATA4+ DDC_CLK DDC_DATA A_VSYNC DATA1- 17 18 19 20 21 DATA0DATA0+ DATA0/5_SHLD DATA5DATA5+ 10 DATA1+ 22 CLK_SHLD 11 DATA1/3_SHLD 23 CLK+ 12 DATA3- 24 CLK- 1 8 17 24 Power / USB: Plus Power USB connector (If fitted) Pin 1 2 3 4 Function Vbus DD+ Ground 5
Mechanical Drawings (G1500072) 13 236 172 45 18 43 16 18 84 149 29 263 228.10 (ACTIVE AREA) 17 131 114.05 220 346 330 304.10 (ACTIVE AREA) DISPLAY CENTER 32 47 19 64 19 64 19 64 152.05 19 63 31 13 1-off R2.6 CLOSED SLOT 4 off R2 SLOTS 90 1off R2.6 SLOT 102 71 4 off M4 x 8 STUDS 122 203 6 29 47 168 This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited.
Mechanical Drawings cont: 111 DUAL USB SINGLE USB 18 18 PLUS POWER 18 9 30 MINI-B USB 36 24V DVI VGA 330 (REFERENCE) 128 75.0 127 173 75.0 23 95 97 4 off M4 SCREW ENGAGEMENT 6mm FROM SURFACE This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublished Property of GDS (UK).
Mechanical Drawings (G1500127) 13 108 128 45 172 18 43 16 18 84 29 149 263 114.05 228.10 (ACTIVE AREA) 17 220 346 330 304.10 (ACTIVE AREA) DISPLAY CENTER 32 47 19 64 19 64 19 152.05 64 19 63 31 12.76 131 4-OFF R2 SLOTS 32 70 71 STUDS- M4x8 203 6 29 90 47 168 This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display Solutions Ltd, Yorkshire, UK.
Mechanical Drawings Cont 111 18 36 9 66 SINGLE USB 23 DUAL USB 24V MINI-B USB VGA 330 (REFERENCE) 75.00 127 75.00 12.00 92 263 (REFERENCE) 95 128 4xM4 SCREW ENGAGEMENT 6mm FROM SURFACE This document and information herein is the property of Global Display Solutions Ltd. and all unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublished Property of GDS (UK).
