TCL 100 User Guide
Contents Analog Alarm Clock Features........ 3 Clock Functions .............................. 9 Cordless Vibration Pad Features .. 4 Help and Support ......................... 12 Important Safety Instructions ...... 5 Troubleshooting Guide ................ 12 Included Equipment ....................... 6 Maintenance and Warranty ......... 13 Set Up .............................................. 6 Technical Details........................... 15 LED Display Notification ................
Clock Features TCL 100 Analog Alarm Clock Features 11 1 Snooze button/ 22 3 3 3 Alarm ON/OFF Alarm light/ incoming call light/Stop alarm 2 LED: Power ON/ OFF/Battery ON/OFF 4 Volume control 5 Set one of 5 44 acoustic signals 5 5 6 Pitch 66 7 Vibration and 77 88 15 15 9 9 14 14 10 10 Acoustics 8 Flashing lamp ON/OFF 9 Snooze delay 10 Clock 11 11 16 16 3 13 13 illumination 11 Telephone line socket 12 Power adapter socket 13 Vibration pad socket 14 Set alarm time 15 Set time 16 Batte
Clock Features TCL100 Cordless Vibration Pad Features 1 LED: Alarm ON/ OFF/Battery charge low 1 2 Vibration pad ON/OFF 22 3 Battery compartment 4 Screws 33 for battery compartment 5 Connection cable socket 44 55 4 Service Center
Getting started Getting Started — Included Equipment • • • • • 1 Analog Alarm Clock 1 Power Adapter 1 Vibration Pad 1 Connector Cable for Vibration Pad 2XAAA, 500mA Ni-MH Rechargable Battery for Alarm Clock • • • • 3XAAA, 800mA Ni-MH Rechargeable Battery Pack for Vibration Pad Telephone Cord Operating Instructions Battery Compartment Cover Set up 1. Connecting the alarm clock i. Insert the supplied batteries in the clock’s battery compartment.
Getting started Getting started LED Display Notification Alarm Clock Face The following functions are on the alarm clock face: Red: Alarm function is activated. Flashing Orange: Alarm function is activated, and battery charge is low. Vibration Pad The following functions are on the vibration pad: Flashing Green Every 2 Seconds: Vibration pad is on. Red: Vibration pad is charging. Flashing Red: Battery charge is low.
Clock functions Clock Functions Setting the clock Turn the set time rotary knob until the clock shows the correct time. Setting the alarm Turn the alarm time rotary knob until the clock shows the correct time for the alarm to trigger. Turning the alarm on/off Turn the alarm on/off rotary knob clockwise for On. Counterclockwise for Off. Setting the volume Caution: The volume/acoustic signal/pitch can only be modified if the alarm is on. If the alarm is off, those settings cannot be adjusted.
Clock functions Caution: Exposure to the alarm at full volume for a long period could cause ear damage. Selecting the acoustic signal Turn the acoustic signal rotary knob to required acoustic signal. Setting the pitch Turn the pitch rotary knob to set the pitch. It may be possible to detect higher or lower pitch tones even at low volumes. Setting the clock face illumination Slide the illumination switch to set clock face illumination.
Clock functions Setting the flashing light ON OFF Slide the switch to set the light in the snooze button to flash during an alarm. There are two settings available: (from left to right) On and Off. Setting the snooze delay 0m 5m 15m SNOOZE Slide the snooze delay switch to set the snooze delay. There are three settings available: (from left to right) 0 min, 5 min, or 15 min.
Help and support Help and support If you have problems with your device, please refer to the following information before calling for support. If you continue to have problems, please call the Service Center at 1-866-AMPLICOM (267-5426) for further assistance. Troubleshooting guide My clock does not work 1. The battery charge may be too low or no batteries have been inserted. 2. The clock may not be plugged in. My vibration pad does not work 1.
Maintenance and warranty Maintenance and Warranty Maintenance • • Please clean your equipment’s surfaces with a soft, lint-free cloth. Never use cleaning agents or solvents. Warranty AMPLICOM equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble free functioning and a long service life.
Maintenance and warranty If your equipment shows signs of defect during the period of warranty, please return to the sales outlet in which you purchased the AMPLICOM equipment together with the purchase receipt. All rights to claims under the terms of warranty in accordance with this agreement must be asserted exclusively with regard to your sales outlet. Two years after the purchase of our products, claims under the terms of warranty can no longer be asserted.
Technical details Technical details Alarm Clock Frequency Power supply Telephone plug Batteries Initial charging time Optimum ambient temperature Optimum storage temperature Transmission power Dimensions L / W / H Weight 433 MHz Input: 100-240 VAC, 50/60Hz Output: 12VDC, 670mA BS 6312 2 x AAA 1.2 V, 500 mAh, NiMH Up to 16 hrs 32˚F to 104˚F (0˚C to 40˚C) -4˚F to 140˚F (-20˚C to 60˚C) 10 dBm 5.2 x 5.8 x 3.3 in (132 x 146 x 84.6 mm) 12.3 - 13.
Questions? ¿Dudas? Amplicom USA Service Center 310 Ambrose Avenue Nashville, TN 37207 V/TTY: 1-866-AMPLICOM (267-5426) www.amplicomusa.