Instructions / Assembly
ASSEMBLY INSTRUCTION
Glitzhome, LLC
HOW THE SOLAR LIGHT WORKS:
During the day, the solar panel converts solar power into energy and stores it in the rechargeable battery. At night, the light
turns on automatically and using the energy stored. The duration of the illumination will depend on your geographical
location, weather conditions and seasonal light availability.
CHOOSE AN IDEAL LOCATION:
Choose an outdoor location where the solar panel can receive at least 8 hours of full and direct sunlight each day. Shaded
locations will reduce the battery charge and shorten the illumination time at night. Avoid placing solar lights near bright light
sources, such as street lights. The bright light sources may cause the solar light to turn off automatically. Solar lights are
ideal for night time lighting in the garden, lawn, etc. You can also place the solar lights outdoor during the day and then
place them indoors for lighting.
ATTENTION FOR FIRST TIME USE:
Turn the ON/OFF switch to the "ON" position, the light sensor will control the lighting automatically. When the environment
turns dark, the solar light will turn on and use the energy stored in the battery. If turn the switch to the "OFF" position, it will
turn off to save energy.
If the solar light does not turn on automatically at night after 8 hours of charging during the day, please check the following:
1. Make sure the power switch is at the "ON" position.
2. Check the battery and make sure the battery contacts the terminals securely.
3. Make sure the solar light is located in a sunny location and the solar panel can receive direct sunlight.
IMPORTANT: DOUBLE CHECK CONTENTS BEFORE DISCARDING THE PACKAGING TO
PREVENT LOSING PARTS THAT ARE NEEDED FOR ASSEMBLY
PRECAUTIONS:
1. Please note the solar light is designed to work when the environment gets dark. If there are strong light sources nearby,
the solar light may illuminate dimly or not light up at all.
2. Although the battery has been charged by the manufacturer, the electric charge may have dropped by the time consumer
receives the product. Please let the solar light charge for a full day for the maximum performance.
3. Surface of the solar panel must be kept clean. Dusty surface will reduce charging efficiency.