Assembly Instruction ACCENT CHAIR
PRE-ASSEMBLY PREPARATION • CAUTION: Assembly will require at least 2 adults. DO NOT use power tools. Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly return it in it's original packaging. • WARNING! 1. DO NOT let any sharp objects touch or rub the surface of the product. 2. When assembling, do not let children play around the working area. 3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up. 4.
STEP 1 Attached the Back Frame (C) to the Left Side Frame (E) by using Allen Bolt (G), Allen Bolt (H) and Allen Wrench (J). C J H E G STEP 2 Attached the Right Side Frame (F) to the Back Frame (C) by using Allen Bolt (G),Allen Bolt (H) and Allen Wrench (J) as shown in below diagram.
STEP 3 Attached the Seat Frame (D) to the Back Frame (C) and Side Frames (E&F) by using Allen Bolt (G), Allen Bolt (H) and Allen Wrench (J) as shown in below diagram. H H E F D C G G J STEP 4 Attached the Back Cushion (A) to the Back Frame (C) by using Screw (I) and Screw Driver (K).
STEP 5 Attached the Seat Cushion (B) to the Seat Frame (D) by using Screw (I) and Screw Driver (K) as shown in below diagram. I B K Please screw vertically in this step!! STEP 6 After initial assembly, the product may acclimate to its new environment. Please ensure all screws are still securely tightened.