glitz home’ Glitz home Corporation (Shanghai), Ltd. Assembly Instruction C SIDE TABLE CHARRING Carefully unpack and Identify each component before beginning assembly. Before you begin, please refer to pairs list to make sure that you have all parts. Please take care when assembling the unit and always place the parts on a clean, soft surface.
glitz home’ atm CAUTION: Assembly will require at least 2 adults. DO NOT use power tools. Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly rectum it in it's original packaging. * WARNING! 1. DO NOT let any sharp objects touch or rub the surface of the product. 2. When assembling, do not let children play around the working area. 3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up. 4.
glitz home’ TOP PANEL (A) LEFT PANEL (B) RIGHT PANEL (C) BACK PANEL (D) Fy RN Qty: 1 Qty: 1 Qty: 1 Qty: 1 FRONT BOTTOM CROSS | DRAWER FRONT PANEL | DRAWER LEFT PANEL DRAWER RIGHT PANEL BAR Qty: 1 Qty: 1 Qty: 1 Qty: 1 DRAWER BACK PANEL | DRAWER BOTTOM TOP FRAME (K) BOTTOM FRAME (L) 0 PANEL (J) Qty: 1 Qty: 1 Qty: 1 aty: 1 VERTICAL TUBE {M) Qty: 4 HARDWARE LIST CAM (1) CAM LOCK (2) PHILLIPS SCREW (3) ALLEN BOLT (4) 215*9mm 24*37mm M4*18mm Qty: 12 Qty: 12 Qty: 8 Qty: 2 WOOD DOWEL (5) ALLEN BOLT (6) CAP (7) HAND
glitz home’ ALLEN WRENCH (9) NOT INCLUDED ~~ —= Qty: 1 REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 1 CAM ar PCS STEP 1 Insert the cam (1) into top panel (A) by using screwdriver.
glitz home’ REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 5 WOOD DOWEL 6*20i 0 PCS STEP 2 mm CC Insert the wood dowel (5) into the back panel (D). REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 1 CAM Pr =a PCS STEP 3 5 WOOD DOWEL @6*20MM PCS Insert cam (1) into left panel (B) and right panel (C). Insert wood dowel (5) into left panel (B) and right panel (C).
glitz home’ REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 2 CAM LOCK 215'9MM PCS STEP 4 Assemble left panel (B) & right panel (C) & back panel (D) & front bottom cross bar (E) together with cam lock (2) by using screwdriver. REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 2 CAM LOCK @15*9MM PCS STEP 5 Assemble the frame box to the top panel (A) with cam lock (2) by using screwdriver as shown in the diagram.
glitz home’ STEP 6 REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 6 ALLEN BOLT M6*30mm PCS 9 ALLEN WRENCH 1PC Attach vertical tube (M) to bottom frame (L) with Allen bolt (6) using Allen wrench (9). Fully tighten bolts. REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 6 ALLEN BOLT PCS STEP 7 9 ALLEN WRENCH 1PC Attach top frame (K) to vertical tube (M) with Allen bolt (6) using Allen wrench (9). Fully tighten bolts.
glitz home’ REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 3 PHILLIP SCREW 24*37mm [i PCS STEP 8 7 CAP & PCS Attach top frame (K) to the bottom of assembled box with fillips screw (3) using screwdriver. Fully tighten screws. Fully insert cap (7) into the holes of bottom frame (L). REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 1 CAM eso PCS 4 ALLEN BOLT M4*19MM [3 J PCS STEP 9 8 HANDLE 12*22*30MM —) 1PC Insert cam (1) into drawer front panel as shown in diagram.
glitz home’ REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 3 PHILLIPS SCREW @4*37MM vee PCS 5 WOOD DOWEL 26*20MM PCS STEP 10 Assemble drawer left panel (G) & drawer right panel (H) & drawer back panel (I) together with fillips screw (3) using screw driver. Insert wood dowel (5) to drawer left panel (G) and drawer right panel(H) STEP 11 Carefully slide the drawer bottom panel (J) into drawer as shown in the diagram.
glitz home’ REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY STEP 12 2 CAM LOCK 159MM 5 PCS Align the cam (1) with drawer left panel (G) and drawer right panel (H) and slide into place. Insert cam lock (2) into drawer left panel (G) and drawer right panel (H) and fully tighten. STEP 13 Carefully put the assembled drawer into top box. PLEASE NOTE: The drawers should slide completely Intel desk. If drawers Jam or bind, remove them, realign the glides and reinsert.