Use and Care Manual

4-22, 4-30
Architectural Coatings Glidden Max-Flex All Surface Interior/Exterior Paint + Primer
GENERAL DESCRIPTION PRODUCT DATA
GMF10XX Series
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
PRODUCT TYPE: Lacquer
SHEEN: Matte, 7-16 @ 60º
Satin, 5-22 @ 60º
Gloss, >70 @ 60º
VOLUME SOLIDS*: 7% +/- 2%
WEIGHT SOLIDS*: 13% +/- 2%
WEIGHT/GALLON*: 6.4 lbs. (2.9 kg) +/- 0.2 lbs. (91 g)
MAX PWMIR*: < 1.60
*Product data calculated from GMF1020.
COVERAGE: One can covers approximately 25 sq. ft. (2.3 sq. meters).
Coverage figures do not include material loss due to surface irregulari-
ties and porosity, or material loss due to application method.
DRYING TIME: Dry time @ 70ºF (21ºC); 50% relative humidity.
To Touch: 5 minutes
To Recoat: 5-10 minutes
Put In Use: 24-48 hours
Drying times listed may vary depending on temperature, humidity, film
build, and air movement. Heavier application may take longer.
CLOGGING: If valve clogs, twist and pull off spray tip and rinse in a sol-
vent, such as mineral spirits. Do not stick a pin or other objects in the
stem.
CLEANUP: When finished spraying, hold can upside down and spray
until clear gas appears, then wipe off tip before storing. Clean up wet
paint with mineral spirits or paint thinner.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of empty can. Do not burn or place in home trash
compactor.
FLASH POINT: -139ºF (-95ºC)
PRODUCT INFORMATION
GMF1010 Black Gloss
GMF1011 Black Matte
GMF1012 Elephant Grey Satin
GMF1013 Victory Blue Satin
GMF1014 Napoleon Satin
GMF1015 Wayward Winds Satin
GMF1016 Dark Granite Satin
GMF1017 Elemental Satin
GMF1018 Black Elegance Satin
GMF1019 Phantom Hue Satin
GMF1020 White Gloss
GMF1021 White Matte
GMF1022 Dark As Night Satin
GMF1023 Gray Heron Satin
GMF1024 Brick Red Satin
GMF1025 Shining Armor Satin
GMF1026 Chocolate Pretzel Satin
GMF1027 Peppered Pecan Satin
GMF1028 Earthy Cane Satin
GMF1029 The Buff Satin
GMF10XX Series
Ultra Durable Finish
Flawless Finish
Dries Within 5 Minutes
No Drips or Streaks
Interior/Exterior Paint + Primer
Glidden Max-Flex All Surface spray paint is a paint+primer that pro-
vides exceptional coverage and an ultra-durable finish on a range of
surfaces like wood, metal, plastic, ceramic, and more. It covers sur-
faces with fewer spray passes and dries within 5 minutes with a flaw-
less, durable finish, so your projects can be completed easier and
faster.
Ceramic Plastic
Ferrous Metal Vinyl
Glass Wood
See Precautions and First Aid on Back Panel. Read Label and Safety Data Sheet Prior to Use. See other cautions on last page.
PACKAGING
Aerosol Net Wt. 12 oz. (340 g)
GLIDDEN MAX-FLEX™
LIMITATIONS OF USE
Use outdoors or in a well-ventilated area, such as an open garage.
Cover surrounding area to protect from overspray. Apply when no pre-
cipitation is expected for 24 hours, and when temperature is 50°F
(10°C) to 90°F (32°C) and will remain above 50°F (10°C) for the next 24
hours. Avoid spraying in windy, dusty conditions.
Not recommended for use on polyethylene.