User's Manual

User manual

Introduction

Congr

atulations on receiving your GL-AR750. As part of our Green Initiative, we do not include printed user

documentation with our product packaging. This policy saves paper, lowers shipping costs, reduces carbon

emissions and results in a cleaner environment.

Documentation

All product and accessory documentation can be found at the GLI Support Centre: http://www.gl-inet.com/docsOn

this site you will gain access to GLI technical resources and information about GLI products. To use your new GLI

Mini Router you will need to follow the simple steps which you can see from

http://www.gl-inet.com/docs/wiki/#!mini/index.md

Default System Settings

Product LAN Default IP Address LAN Fall-back IP Address

GL-AR750

DHCP 192.168.8.1

Initial Set-up

Interfaces described as followed:

Power to the GLI Mini Router is provided by connect the power lead (supplied)

to the power adaptor (buy

separately) and then to the power interface on the GLI Mini Router.

Once power is provided to the GLI Mini Router the LED’s will provide status on its operation based on the

following:

LED Indicator Description

LED 1 (Power) Green solid Power is applied

LED 2 (Customized) Customized This is customized LED.

LED 3 (WiFi connection) Red Indicates WiFi signal (solid) and

data transfer (flashing).

Button Definition

z Press the Rese

t button to toggle the WiFi signal ON or OFF.

z Press and hold the Reset button for at least 8 seconds, then release your finger to reset the router to factory

default state. Wait until the router reboots, which could take about 3 minutes.

z The function of “switch” is configurable by user.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including

PAGE 1
User manual Introduction Congratulations on receiving your GL-AR750. As part of our Green Initiative, we do not include printed user documentation with our product packaging. This policy saves paper, lowers shipping costs, reduces carbon emissions and results in a cleaner environment. Documentation All product and accessory documentation can be found at the GLI Support Centre: http://www.gl-inet.com/docsOn this site you will gain access to GLI technical resources and information about GLI products.
PAGE 2
interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users’ authority to operate the equipment. FCC Caution Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.