TM20-B/QQ NFC Reader/Writer Product Specification Ver1.00 Model:TM20-B/QQ Automatic Recognition Business Division JUNE 2020 Technology Headquarters Approved by Checked by Prepared by GL Solutions Inc.
TM20-B/QQ Request All rights reserved. No part of this document may be copied or reproduced without the expressed written permission of GL Solutions Inc. Japan. The contents of this document are subject to future changes. We have made eery effort to ensure the contents of this document . However, please contact us if you find any unclear points, errors or omissions. Please contact us by the fax number shown elow. Please note that we should not be held liable for results from your operating the product.
TM20-B/QQ Change historiy Section 1 Date JUN 28,2020 GL Solutions Inc. JAPAN Ver. 1.00 Change description Prepared the first edition.
TM20-B/QQ Contents Overview ···································································· 1 General Specifications ······················································· 2 Names and functions of each part ············································· 3 3.1. Front Side ································································ 3 3.2. Back Side ································································· 3 Functional descriptions ······················································ 4 4.
TM20-B/QQ Overview The NFC Reader/Writer “TM20-B/QQ”(hereinafer called “this equipment” or “Reader/Writer”) is a reader/writer to read the serial number(alled “tag ID” unless otherwise specified) of an ISO15693 tag or card (called “tag”) and read and write data in the tag. ・Extaernal control equipment such as a PC can control this equipment via RS-232C. ・It is reader/writer to read and write data in a tag within the access area of the antenna built into this equipment.
TM20-B/QQ General Specifications Item Rated input voltage Power supply noise Maximum consumption current Average consumption current (reference value) Operationg frequency Modulation method Access distance(Note1) Operating temperature ange Operating humidity range Storage temperature range Storage humidity range Outside dimensions Interface Communication speed Connection connector Specification DC5V±10% 13.
TM20-B/QQ Names and functions of each part 3.1. Front Side 1)Shielding case 1)Shielding case Covers to protect an electronic circuit 3.2. Back Side 2)Connector for external control 3)Antenna substrate 2)Connector for external control device Connector to connect an external control device 3)Antenna substrate Antenna part to communicate with a tag Do not touch it with bare hands GL solutions Inc.
TM20-B/QQ Functional descriptions 4.1. Configuration diagram This specification is applied Antenna part RF part Control part (Setting storage) To external control device Serial I/F CN1 Power input(DC5V±10%) GL solutions Inc.
TM20-B/QQ Connection with external control device Slave station Control station RS-232C External control device Reader/Writer DC5V±10% DC power supply 5.1. Connector(CN1) to connect external control device 1)Connection with external control device CN1 use connector;S4B-EH(manufactured by JST) Terminal No. Signal name I/O 1 VCC - Power Function 2 TxD O Transmitted data from Reader/Writer 3 RxD I Received data from Reader/Writer 4 GND - Ground 5.2.
TM20-B/QQ Handling precautions When using the Reader/Writer and a card, please note the precautions shown below. Make sure to follow them since misuse may cause an abnormal operation, leading to a product failure. Please note that we shall not be held liable for any incidental damage that occurs to the recorded contents of the Reader/Writer due to its failure, malfunction or defect. Before use Please describe the follon items in the Instruction Manual or Delivery Specification, etc.
TM20-B/QQ Persons fitted with a medical device should keep the device’s fitting portion more than 22cm away This equipment is RFID (radio fiequency identification) equipment which uses radio waves Therefore, It may afi'ect a medical device depending on the use application or place. In order to minimize the efi'cct’, please observe the following during operation: Persons fitted with an implanted medical device should keep the fitting portion more than 22 cm away from the antenna portion of this equipment.
TM20-B/QQ Prevent touching with bare hand The Reader/Writer has areas which produce high voltage during its operation. Therefore, design the structure does not easily allow touching with bare hands or foreign objects, etc. This may ease electric shocks. Make sure to follow this instruction since failure to do so may cause a product failure. Please note that we shall not be held liable for any incidental damage caused by a failure, malfimction, or defect of the Readen’Writer.
TM20-B/QQ 12.External appearance GL solutions Inc.
TM20-B/QQ NCC Notice 根據 NCC 低功率電波輻射性電機管理辦法規定： 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自 變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象 時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法 規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用 電波輻射性電機設備之干擾。 此模組於取得認證後將依規定於模組本體標示審驗合格標籤， 並要求平台廠商於平台上標示『本產品內含發射器模組： CCXXxxLPyyyZzW』字樣。 FCC & ISED Notice Required End Product Labeling Any device incorporating this module must include an external, visible, permanent marking or label which states: “Contains FCC ID: VQ7TM20-B-QQ” and “Co
TM20-B/QQ separate from production firmware. Host integrators should contact GL Solutions Inc. for assistance with test modes needed for module/host compliance test requirements. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warming as shown in User manual.
TM20-B/QQ Avis Canadien L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
