User's Manual
RF Module / Receiver User Manual
GIYOUNG ELECTRONICS
3F #319, The O valley B/D, 555-9, Hogye-Dong, Dongan-Gu, Anyang-Si, Gyenggi-Do, Korea
www.gigyong.com
Introduction and Key Features
Thank you for purchasing the GIYOUNG product.
The GIYOUNG transmitter module and receiver based upon DSSS (direct sequence spread spectrum)
This product uses 2.4GHz bandwidth in ISM band
Not only this product can be used for air but also surface.
(For example, you can use the 3PK for surface by the transmitter module for FF9 for air.)
(The receiver is possible to use not to distinguish air from surface in the GIYOUNG products.)
This product prides fast binding speed and accuracy via 2-ways communication between the
transmitter and receiver when you set ID.
The buzzer notifies to make link via 2-ways communication whenever switch on because the
transmitter module has the buzzer.
(After link, it operates 1 way communication to allow for stability and reaction rate.)
This product can link an empty channel at power on the transmitter while other products are used in
2.4GHz in ISM band because of the RSSI (Received Signal Strength Indication) function.
This product is realized real-time data processing for fast binding speed demanded to RC, and the
reaction rate is outstanding because the real speed that the PPM signal from the transmitter is
processed by digital is within 5ms.
This product is stable not to communicate the receiver which is not set ID, because each transmitter
RF module is allocated individual’s ID.
There are the many advantages due to the RF module include antenna (antenna type).
A: It is very strong to impact or falling
B: It is very convenient when the handle of transmitter is installed a stand.
C: It is tidy due to unnecessary an antenna cable and no fear of a damaged cable.
It boasts one step ahead of technology by adopted the high efficiency and gain antenna via various
field tests
Caution and Safety for Using
Please read the safety instructions before using this product.
Do not disassemble which may cause product failure.
Please install of RF module and receiver with controller after switch off.
After installing the RF module into the controller, please turn on the switch for the throttle lever of
controller on a stop position first and then please turn on the switch for the receiver.
After stopping the engine or the motor, please turn off the receiver first, and then switch off the