C-Handle Ergonomic arc design makes it comfortable to hold and operate the tools. Exhaust Hose It directs all the exhaust to the rear. Protective Cover Made of Sanporene, it provides a soft, gentle touch for the operator.
WARNING 1. Turn the tool off under the following circumstances. (1) Sanding job is paussed. (2) Pad change. (3) Sanding job is done. (4) The air supply is disconnected. (5) Do not leave the air valve on unless the tool is being operated. 2. Always wear a safety glasses and face shield for eye protection. 3. Please do not apply the tool onto inappropriate material to avoid pad damage. 4. Please do not use broken or damaged pad. 5.
Operation Notice 4. Pad installation Inspect before operating the tool : WARNING 1. Make sure the working environment is safe for sanding work. 2. Make sure of the capacity of the air compressor, drain the water from the compressor, and lubricate properly to maintain quality air supply. 3. This tool will perform well at 90psi (6.2bar). Please make sure the air pressure is appropriate. Exceeding air pressure will reduce the tool life and possibly cause injury.