Quick Start Guide
Welcome to GIMate® Are you ready to breathe your way to a healthy gut?! GIMate is the personal digestive health monitor from Vivante Health. This ingenious little device harnesses the same technology used by the top digestive health clinics and gastroenterology departments in the world. We’ve just made it smaller, non-invasive, portable and affordable. This Quick Start Guide tells you how to begin checking and using the key features of your new GIMate. For more information, visit vivantehealth.
IMPORTANT: After first use, charge your GIMate for 12 or more hours before using it again. 1. Turn on the GIMate by pressing the power button To turn on your GIMate, press and hold the On/Off button for a second or so and it will turn on your device.
2.
3. Set Date and Time on GIMate Select “More” from the home screen, and then select “Settings” to set the current “Date” by using the up and down arrows. Press “OK” to return to the “Settings” screen and then select “Time”. Set the current time using the up and down arrows. Press “OK” to finish and return to the “Settings” landing page. Finally, press the back button to return to the home screen.
4. Select “Breath Check” from the home screen The device will take 65 seconds to warm up to the correct temperature for the breath test.
5. Pop open the breathing nozzle by pressing the upper button on the right side of the device Prepare to breathe into the device when the warm-up counter reaches 5 seconds. Take a deep breath at this time, then move the nozzle on the device to your mouth, with the screen facing up.
6. When the device starts to beep, breathe gently into the device and continue breathing until the beeps stop Exhale your breath into the device slowly in a single, continuous breath until the beeps stop. You will breathe out for 8 seconds. Do not inhale while the nozzle is in your mouth, only exhale into the device.
several seconds several seconds 7. Stop breathing into the device when the “Stop” symbol appears on the screen and the beeps stop Remove the nozzle from your mouth. The display screen will generate the results and display your breath reading.
8. Press “Done” after viewing the result to complete the process. The device will automatically turn off after you finish your test and will stay in sleep mode when not in use. Charge the device regularly. Understanding Breath Reading Results Discuss results with your care provider and learn more about breath testing on the GIThrive app or www.vivantehealth.
Caring For Your GIMate® • Use once every 15 minutes, allowing the device to cool down and calibrate between use. • Keep the body of the GIMate dry. The mouthpiece nozzle is detachable and can be wiped with a moist cloth or replaced with a new nozzle, included in the GIMate box. • Don’t rinse the GIMate with water or other liquids. • Keep the GIMate breath nozzle flipped down to keep the nozzle clean. • Store your GIMate in a cool, dark place when not in use.
For More Information FAQ vivantehealth.com/GIMate/FAQ User Manual vivantehealth.com/GIMate/usermanual gimate@vivantehealth.com +1 [888] 200-5492 JnJ Innovation Center, JLabs@TMC 2450 Holcombe Blvd Houston, Texas 77021 www.vivantehealth.com This device complies with Part 15 of the FCC Rules.