User's Manual

RFX-NLL-II

Last Rev: March 2008

RF ExtremeCare: 866.732.0113

Once on, the Red LED

indicator will turn on solid

and the Yellow LED

indicator will begin to flash.

Plug in the video BNC for composite video.

Connect XLR audio cables and

power source.

RED LED

YELLOW LED

GREEN LED

HEADPHONE

PAGE 1
Once on, the Red LED indicator will turn on solid and the Yellow LED indicator will begin to flash. GREEN LED YELLOW LED RED LED HEADPHONE Plug in the video BNC for composite video. Connect XLR audio cables and power source. RFX-NLL-II Last Rev: March 2008 RF ExtremeCare: 866.732.
PAGE 2
8.2 TRANSMITTER: Place the transmitter on the back of the camera. Screw on antennas and position so they will bend back if knocked. Clip camera battery on back of transmitter. Turn transmitter on. The LED will turn RED, and the yellow LED will flash. This indicates that the transmitter is searching for its paired receiver. This can take up to one minute in very high interference or congested areas.