User's Guide

KP-Super3
Power bank x1
User guide x1
1
2
3
Warranty
Thank you for purchasing Gigastone QP-9182W. The limited
warranty for the product shall last for 12 months from the date of
original purchase. This original warranty card and original invoice
must be presented at the time you require warranty service.
. Please keep a valid voucher or any original purchase invoice
to get repairing for free. The limited warranty last for 1 year
from the date of original purchase. Please be noted that a
charging cable belongs to consumables and is not within the
domain of warranty.
. If any damages causes to your product due to wrong usage,
our company will not take any responsibilities.
. For any defect, in the judgement of our technician, caused
under normal use, we are responsible for repairing for free of
charges 12 months commencing from the date of purchase at
the discretion of our company.
www.gigastone.com
Qi TRAVEL
POWER BANK
User Guide
QP-9182W
1
0
0
15W Qi Wireless Charging
Qualcomm QC3.0 & Type-C PD Charger
9000mAh Power Bank
AC 100-240V,50/60Hz,0.5A
5V 3A, 9V 2A
5V 3A, 9V 2A, 12V 1.5A
5V 2.4A, 9V 2A, 12V 1.5A
7.5Watt / 15Watt max
5V 3A max
9000mAh(32.4Wh)
241g
84x82x29mm
Specification
Input1
Input2(Type-C PD3.0)
Output1(Type-C PD3.0)
Output2(USB-A QC3.0)
Output3(Wireless Output)
Total Output
Capacity
Weight
Size
Use power bank to charge other devices
Connect a charging cable and charge your mobile device
directly. Press the power button and QP-9182W starts to charge
your devices.
How to Use
USB-A Lightning,
USB-C,
micro USB
USB-C USB-C
Appearance
Use Reminder
1
00
15W Qi Wireless Charging
Qualcomm QC3.0 & Type-C PD Charger
9000mAh Power Bank
Foldable AC plug
Dual Way USB Type-C
Input 18W & Output PD 18W
USB-A Output
QC3.0
Digital Power Display
Power Button
Press once to show power display ; Long press to turn off
1
2
4
5
6
7
3
QI Charging Indicator
Blue for charging ; Green for standby
QI 15W Wireless Charging Transmitter
1. Switch
Press it once to turn on USB output and wireless charging
output
It automatically turns off in 30 seconds under no-load status.
2. Charging
The LED digital power display blinks while charging
It shows 100 ante fully charged.
3. Wireless Charging
Make sure your phone sequipped with Qi wireless charging
receiver.
otherwise, an additional wireless charging receivet is needed
to install with your phone.
Charge devices through the adapter
Put the plug into the socket and connect a charging cable with
your device. The QP-9182W will begin charging for your device.
Charge through the wireless charging function
Put the wireless device on the QP-9182W, and push the power
bottom. The QP-9182W will begin charging for your device.
USB-A Lightning,
USB-C,
micro USB
USB-C USB-C
Charge for power bank
Insert the plug into the socket, and the power bank will be
charged.
Warning
Please keep QP-9182W away from fire and high temperature
environment.
1
0
0
15W Qi Wireless Charging
Qualcomm QC3.0 & Type-C PD Charger
9000mAh Power Bank
5
0
15W Qi Wireless Charging
Qualcomm QC3.0 & Type-C PD Charger
9000mAh Power Bank
15W Qi Wireless Charging
Qualcomm QC3.0 & Type-C PD Charger
9000mAh Power Bank
15W Qi Wireless Charging
Qualcomm QC3.0 & Type-C PD Charger
9000mAh Power Bank
use home outlet to charge it
use car charger to charge it
FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void your authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures :
1.Reorient or relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4.Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement, the device can be used in portable exposure
condition without restriction.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has been tested and
fou
nd to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
ϋϋ Reorient or relocate the
receiving antenna.
ϋϋ Increase the separation between the equipment and receiver.
ϋϋConnect the equipment into an outlet on a circuit different from that to which the
receiver is connected. ϋϋ Consult the dealer or an experienced radio/TV technician for help.
This device complies
with part 15 of the
FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Super Charger
QP-9182W