Congratulations By purchasing a Gigaset, you have chosen a brand that is fully committed to sustainability. This product’s packaging is eco-friendly! To learn more, visit www.gigaset.com.
Gigaset DX800A all in one – your perfect companion Gigaset DX800A all in one – your perfect companion ... impressive interior and exterior qualities. Go crazy for the vibrant 3.5" TFT display, first-class sound quality and elegant exterior. Your Gigaset can do a lot more than just make calls: DSL or DSL and analogue fixed line – easy – Simply connect your Gigaset. It will automatically detect the networks to which it is connected and adapt its configuration accordingly.
Gigaset DX800A all in one – your perfect companion For more information about your phone, visit www.gigaset.com/gigasetDX800A. After purchasing your Gigaset phone, please register it at www.gigaset.com/service – this will ensure any questions you may have or warranty services you request are dealt with even faster! Have fun using your new phone! Please note To change the display language, proceed as follows (¢ page 118): ¤ Press right on the control key v.
Base overview Base overview 1 7 2 8 9 10 11 1 Adjust volume S = quieter; R = louder During a call/message playback: handsfree/ receiver volume; When an external call is being signalled: ringer volume 2 Display 3 Display keys (programmable; page 40, page 116) In the menu: open a menu for further functions 4 Message key (page 68) Access to call and message lists; Flashes: new message/call or new firmware/ new provider profile available 5 End/back key (red) End, cancel function, go back one menu level (pr
Display icons Display icons Display in idle status (example) Base status (two lines) Current month/year Ã1 2 3 Ã 02 Time Internal name · 6:30am Mo Tu We Th Fr Sa Su Mar 2011 01 02 03 04 05 06 07 8:52am 08 09 10 11 12 13 14 INT 1 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Calls Appointment entered in the calendar (page 100) Current date Calendar Status display in the headers: The following icons are displayed dependent on the settings and the operating status of your base: Answering m
Contents Contents Gigaset DX800A all in one – your perfect companion . . . . . . . . . . . . . . . . 1 Base overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 First steps . . . . . . . . . . . . . . . .
Contents Using the local base directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using online directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the private net directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Gigaset.net directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Setting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Changing the handsfree/receiver volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Setting ringers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Activating/deactivating advisory tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents GNU General Public License (GPL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 GNU Lesser General Public License (LGPL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Index . . . . . . .
Safety precautions Safety precautions Warning Read the safety precautions and the user guide before use. Explain their content and the potential hazards associated with using the telephone to your children. $ Use only the power adapter supplied, as indicated on the underside of the base. Use only the cables supplied for fax, fixed line, LAN and receiver connection and connect these to the intended port only. Using your telephone may affect nearby medical equipment.
First steps First steps Checking the package contents 1 5 2 4 3 7 9 6 8 10 1 2 3 4 5 One base One receiver to be connected to the base One (coiled) cable for connecting the receiver to the base One power cable for connecting the base to the mains power supply One phone cable for connecting the base to the (8-pin with 2 mini western jacks 8/8; the inner 4 pins are assigned and the cable slightly flattened) 6 One phone cable for connecting the base to the analogue fixed line (TAE RJ45 8-pin; the outer
First steps Firmware updates This user guide describes the functions of your base from firmware version 56.00. Whenever there are new or improved functions for your Gigaset, firmware updates are made available for you to download to your base (¢ page 129). If this results in operational changes for using your base, a new version of this user guide or the necessary amendments will be published on the Internet at www.gigaset.com.
First steps Connecting the base The following diagram is an overview of all connections for your base. The individual connections are described in detail below. In order for you to make calls on your phone via the fixed line and VoIP, you need to connect the base to the fixed line and Internet (see diagram below). 6 PC 5 4 3 2 1 7 Follow the steps in the order given below: 1. Connect the receiver to the base. 2 Connect the base to the telephone network (analogue fixed line or ).
First steps 1. Connecting the receiver to the base Underside of the base 2 3 1 1. Insert the jack, which can be found on the longer straight end of the connection cable, into the connection port marked with the ^ icon on the underside of the base. 2 Place the straight part of the cable in the cable recess provided. 3 Insert the other jack on the connection cable into the port on the receiver.
First steps 2. Connecting the base to the telephone network 3a 3b 1 2 Underside of the base 1. Pass one end of the phone cable from behind through the recess in the housing. – Use the 8-pin cable with 2 mini western jacks 8/8 if you wish to connect the phone to the network (¢ page 10, cable 5). – Use the TAE connection cable with RJ11 plug to connect to the analogue fixed line (¢ page 10, cable 6). 2 Plug the telephone cable into the port marked with the ] icon on the underside of the base.
First steps 3. Connecting the base to the mains power supply 3 1 2 1. Insert the small jack on the power cable from the rear into the recess in the housing. 2 Plug the jack into the port marked with the \ icon on the underside of the base. 3 Then connect the power cable to the mains power supply. Warning u Keep the power adapter plugged in at all times for operation, as the base does not work without a mains connection. u Use only the power and telephone cables supplied.
First steps 4. Connecting the base with a router (Internet) or PC Your base features two LAN connections, via which you can connect the base to a router and/or PC. Connection to a router is required for Internet telephony VoIP (Voice over Internet Protocol). You can set up and configure up to six accounts (VoIP phone numbers) from one or several VoIP provider(s) on the base.
First steps 3 1 2 1. Guide the end of the Ethernet cable provided (Cat 5 with 2 RJ45 modular jacks) from the rear through the recess in the housing. 2 Plug the jack on the Ethernet cable into the LAN port on the underside of the base. 3 Then insert the second Ethernet cable jack into a LAN port on the router or PC..
First steps Setting up the base – installation wizard As soon as the phone is connected to the mains power supply, the firmware is started. The telephone checks which telephone connections it is connected to. If no connections have been generated on the base yet, the installation wizard starts. The wizard allows you to make all necessary settings for your phone. The following message appears in the display.
First steps Connection Procedure For connection to VoIP 2. IP wizard 3. Registration wizard 4. Connection wizard Then: installation complete For connection to the analogue fixed line and VoIP 2. IP wizard 3. Registration wizard 4. Connection wizard Then: installation complete Please note: u If the installation wizard is activated, no other handset can access the Settings menu on the base. u To quit the installation wizard before the process is complete, press and hold the red end key T.
First steps 1. wizard: Assigning/entering the connection's MSNs Prerequisite: You have connected the base to the telephone network. Several numbers (MSNs) were provided by the network provider when you received your connection confirmation. You can save up to ten numbers (MSNs) on your base. If there is no MSN entered on your base, you can do the following with the wizard: u Assign the MSNs for your connection i.e., call them up from the exchange (automatic MSN assignment) or enter them manually.
First steps Ð ISDN Wizard MSN Assignment MSN1: 12345601 After the MSNs have been successfully assigned, a list containing the MSNs is displayed. MSN2: 12345602 MSN3: 12345603 MSN4: 12345604 Change ¤ Press the display key §OK§ to close OK the wizard. The display shows ISDN installation complete.. Please note You can change the names of the MSNs (¢ page 126). If no MSNs were detected, No MSNs detected. is displayed.
First steps ¤ Enter your first MSN (without area Configure MSNs W MSN - Name: to switch to the next field. MSN - Number: ¤ Repeat the above procedure to 123456| V MSN - Name:
First steps 2. IP wizard: Making VoIP settings You will see the following display: IP Wizard ? Start IP installation wizard? No Yes Before you can use the Internet (VoIP) to phone any other numbers on the Internet, the fixed line or the mobile network, you need the services of a VoIP provider who supports the VoIP SIP standard. Prerequisite: You have registered with a VoIP provider (e.g., via your PC) and set up at least one VoIP account (IP account).
First steps Starting the IP wizard Prerequisite: The base is connected to the router. Your router is connected to the Internet (¢ page 16). ¤ Press on the centre of the control key w or on the right display key §Yes§ to start the IP wizard. Ð IP Wizard This wizard helps you configure an IP account and register it with your provider Information about the IP wizard appears in the display. ¤ Press the bottom of the control key s to scroll down.
First steps You will see the following display: IP Wizard ? Do you have a code for Auto Configuration? No Your VoIP provider has supplied you with an authentication name/password and, where applicable, a user name: ¤ Press the key below §No§ on the dis¤ play screen. For further information, please see "Downloading VoIP provider data" (¢ page 27). Yes You have received an auto-configuration code (activation code) from your VoIP provider: ¤ Press the key below §Yes§ on the display screen.
First steps No Internet connection: The phone requires an Internet connection for you to register your telephone with a VoIP provider. If a connection cannot be made, one of the following messages is displayed: u If the phone cannot establish a connection to the router, the message IP address not available. is displayed. Check the plug connection between the router and the base and check the settings on the router. Your phone is preconfigured for dynamic assignment of the IP address.
First steps Downloading VoIP provider data The connection wizard establishes a connection with the Gigaset configuration server on the Internet. Various profiles with general access data for different VoIP providers can be downloaded here. After a brief period you will see the following display: Select your country A list of countries is loaded. ¤ Press up or down on the control key repeatedly until the country in which you wish to use the phone is selected in the display.
First steps Entering user data for your VoIP account You are now prompted to enter your personal access data for your VoIP account. The following are provider-dependent: u User Name, Authentication Name, Authentication Password Please note ... ... when entering access data, it is case sensitive. To switch between upper and lower case and digits, press the # key (several times if necessary). You can see briefly in the display whether upper case, lower case or digit input is selected.
First steps Provider Data User Name: ¤ Using the keypad, enter the user name that you received from your VoIP provider. Abc
First steps 3. Registration wizard The registration wizard helps you register handsets to the base. Please note Registration ? Register a handset? No Yes Press the left display key §No§, if you do not wish to register any handsets. This closes the registration wizard and the connection wizard is started (¢ page 31). To register handsets on the base at a later stage (¢ page 104). ¤ Press the display key §Yes§. The base changes to registration mode.
First steps Please note u By default, the base is assigned the internal name INT 1 and the internal number 1. u The base assigns the lowest free internal number to the handset (possible numbers: 2–7). The handset's internal name is shown in the display e.g., INT 2. This means that the handset has been assigned the internal number 2. u You can change the internal numbers and names later (¢ page 105). 4.
First steps Starting the connection wizard a. Connection Wizard ? Assign connections ¤ Press the display key §Yes§ if you to desk phone INT 1? No Yes ¤ b. (Display for connection) Ð Receive Connections INT 1 wish to change the setting for the send and receive connections of the base (internal name INT 1). Press the display key §No§ if you do not wish to change the setting for the base. The list of receive connections currently assigned is displayed.
First steps Press §OK§ to skip the following steps. Continue from Press §Change§ to display the following: c. (Display for connection) If you do not want calls to MSN1 or your fixed line number signalled on the base: ¤ Press right on the control key v to set to No. INT 1 Receive Calls for MSN1: f Yes Receive Calls for £ e.
First steps d. (Display for connection) ¤ Press down on the control key s INT 1 W MSN1: No Receive Calls for ¤ to switch to the next number. Select either Yes or No as described above. Repeat the steps for each number. MSN2: f Yes g Back V Save ¤ Press the display key §Save§ once you have finished configuring the settings for the base.
First steps f. INT 1 Connection for outgoing calls f IP1 g Back If the base is to make calls via a different connection/phone number: ¤ Press right on the control key v repeatedly, until the required connection is displayed (in the example, IP1). Save ¤ Press the display key §Save§ to save the settings. If handsets are already registered to the base, you are requested to assign send and receive connections for the handsets. The following is shown in the display: Assign connections to handset INT ...
First steps Completing the installation This completes the installation. The following is shown in the display: Setup ‰ Setup complete. Afterwards, the base returns to idle status (for an example of the display in idle status ¢ page 4). The answering machines of the base to which you assigned a receive connection are activated and switched on in answer and record mode with a standard announcement (¢ page 89).
First steps Setting the date and time There are three methods of setting the date and time: u The base updates the date and time from the network the first time you make an outgoing, external call. u You can configure your base so that once the base is connected to the Internet, the date and time is transferred from a time server. You can activate/deactivate the synchronisation with a time server via the Web configurator.
First steps Proceeding Now you have successfully set up your base, you will certainly want to adapt it to your personal requirements. Use the following guide to quickly locate the most important subjects. If you are unfamiliar with menu-driven devices such as other Gigaset telephones, read the section entitled "Operating the base" (¢ page 39) first. Information on ... ... is located here.
Operating the base Operating the base Control key Below, the side of the control key that you must press in the respective operating situation is marked in black (top, bottom, right, left, centre) e.g., v for "press right on the control key" or w for "press the centre of the control key". The control key has a number of different functions: In idle status s v u t Open the local directory (press briefly). Open the list of online directories (press and hold). Open the main menu.
Operating the base Display keys The functions of the display keys change depending on the particular operating situation. Example: Back OK Current display key functions Display keys Some important display keys: Options Open a menu for further functions. Confirm selection. OK Delete key: Delete character by character/word by word from right to Û left. Back Go back one menu level or cancel operation. Save Save entry. You can set the functions of the keys in idle status individually (¢ page 116).
Operating the base Using the menus You can access your base's functions using a menu that has a number of levels. Main menu (first menu level) ¤ When the handset is in idle status, press the right control key v to open the main menu. The main menu functions are shown in the display as icons. The selected function is marked by an orange circle around the icon and the corresponding name is shown in the display header. To access a function i.e.
Operating the base Understanding the operating steps The operating steps are shown in abbreviated form. Example: The display: v ¢ Ï Settings ¢ Audio Settings ¢ Music on Hold (³ = on) means: ¤ Press right on the control key v to open the main menu. ¤ Press right, left, down and up on the Settings Ç ò É Ê Ë Ì Í Î Ï Back control key p to navigate to the Settings submenu. OK ¤ Press the display key §OK§ to confirm your selection.
Operating the base Audio Settings ¤ Press down on the control key s Call Volume until the Music on Hold function appears on the display. Ringer Settings Advisory Tones Music on Hold Back ³ Change ¤ Press the display key §Change§ to activate/deactivate the function. Audio Settings The change is effective immediately and does not need to be confirmed. Call Volume Ringer Settings Advisory Tones Music on Hold Back ´ Change ¤ Press the display key §Back§ to jump back to the previous menu level.
Menu tree Menu tree Please note Different functions are offered on your base depending on the connection type (Internet and analogue fixed line or Internet and ). Functions that are only displayed when the phone is connected to the analogue fixed line are marked with "Fixed line connection only". To open the main menu: Press v when the base is in idle status.
Menu tree ò ¢ page 108 Bluetooth Activation Search for Headset Search for Cell Phone Search for Data Device Known Devices Own Device É Additional Features ¢ page 86 ¢ page 122 Info Center Resource Directory Screensavers Caller Pictures Sounds Capacity Ê ¢ page 65 Call Lists All Calls Outgoing Calls Accepted Calls Missed Calls Ë Messaging E-mail Ì Voice Mail Play Messages Net AM: Fixed Line Fixed line connection only Net AM: ISDN connection only ¢ page 83 ¢ page 89 ¢ page 97 ¢ page 97 Net
Menu tree Announcements Record Announcemnt. Answer Machine 1 to 3 Play Announcement Answer Machine 1 to 3 Delete Announcemnt. Answer Machine 1 to 3 Record Advisory Msg. Answer Machine 1 to 3 Play Advisory Message Answer Machine 1 to 3 Delete Advisory Msg.
Menu tree Ï Settings Connection Wizard ISDN VoIP VoIP Wizard } connection only Fixed line connection only Date/Time Audio Settings Call Volume Ringer Settings Volume ¢ page 126 ¢ page 127 ¢ page 127 ¢ page 123 ¢ page 119 ¢ page 120 Melodies Time Control Anon. Call Silencing ¢ page 122 ¢ page 122 ¢ page 118 Advisory Tones Music on Hold Display Screensaver Info Ticker Backlight Language Registration Register Handset De-register Handset Telephony Area Codes Send Connections INT 1 ...
Menu tree System Reset DECT Interface FAX Port Local Network Update Firmware System PIN Eco mode 48 Eco mode ¢ page 131 ¢ page 130 ¢ page 130 ¢ page 125 ¢ page 129 ¢ page 124 ¢ page 100
Making calls Making calls If the display backlight is deactivated (¢ page 119), it can be reactivated by pressing any key. Please note You can make up to four external calls at the same time via your base. Making an external call External calls are calls made via the public telephone network (fixed line, mobile network) or via the Internet (VoIP). To make an external call, you need to define one of the base connections as a send connection.
Making calls Selecting a connection at each call Requirement: "Select at each call" has been assigned to the base instead of a send connection (¢ page 128). ~c Enter the number and pick up the receiver. The list of all the base's connections is displayed. q Select a connection. §Dial§ / w Press the display key or the middle of the control key. If a dialling plan has been defined for the dialled phone number (see Web configurator), then the send connection specified in the dialling plan is used.
Making calls If no dialling plans for emergency numbers are preset on your telephone, you should set dialling plans yourself. Assign them to a connection that you know supports emergency numbers. Calls to emergency numbers are always supported by fixed lines. Please note: If no dialling plans are defined for emergency numbers and you have programmed an automatic local area code, the code will also be prefixed to emergency numbers as soon as they are dialled via a VoIP connection.
Making calls Displaying the phone number you are calling (COLP) Prerequisites: u Your network provider supports COLP (Connected Line Identification Presentation). You may need to activate COLP with the provider (ask your provider about this). u The called party has not activated COLR (Connected Line Identification Restriction). For outgoing calls, the phone number of the connection on which the call is received is displayed on the base. The displayed number may differ from the number you have dialled.
Making calls To deactivate the ringer, press the §Silence§ display key. You can accept the call as long as it is displayed on the screen. Accepting a call on a headset Recommendation We recommend you assign the Headset function to a function key on the base (¢ page 116) and use this function key to accept calls – even if your headset has a push-to-talk key. Prerequisite: You have assigned the Headset function to a function key on the base before connecting the headset (¢ page 116).
Making calls Call display (Example of display) If the caller's number is saved in your directory, the caller's name will be displayed. If you have assigned a caller picture (¢ page 70) to the caller, this is shown in the left-hand section of the display. You can use the display to decide which receive connection the call is directed to.
Making calls ¤ Briefly disconnect the PABX power plug. Re-insert the plug and wait for the device to restart. If the caller number is still not displayed: ¤ Check the CLIP settings of your PABX and activate this function if necessary. In the user guide for the device, search for the term "CLIP" (or an alternative term such as "calling line identification", "phone number transmission", "caller ID" etc.). If necessary, contact the device manufacturer.
Making calls Please note If you do not use your Gigaset.net connection for six months, it is automatically deactivated. You cannot be reached for calls from Gigaset.net. The connection is reactivated as soon as you: u Start a search in the Gigaset.net directory u Make a call via Gigaset.net (dial a number with #9 at the end) u Activate the connection via the Web configurator Gigaset HDSP – telephony with brilliant sound quality Your Gigaset telephone supports the broadband codec G.722.
Making calls Switching from handsfree to receiver mode c Pick up the receiver. The speaker on the base is deactivated. Please note In handsfree mode, you can adjust the handsfree volume with the R and S keys. Muting the base You can deactivate the microphone on the receiver, base (handsfree) and any connected headset (wire-bound or Bluetooth) during an external call (including during a conference call or when call swapping). The other parties cannot hear you, but you can still hear them.
Making calls using network services Making calls using network services Network services are functions that your network provider makes available to you. Please note: u Some settings cannot be made simulta- support the "anonymous calling" function. You may have to ask your VoIP provider to activate this function. Activating/deactivating "anonymous calling" for all calls You can permanently activate/deactivate the "withholding number" function for all your phone's connections (fixed line, VoIP).
Making calls using network services Activate/deactivate call divert. Phone Number Enter the number to which the call is to be diverted. For every connection, you can specify a different fixed line, VoIP or mobile number. You must specify another Gigaset.net number when diverting a call from your Gigaset.net number. When Select All Calls / When Busy / No Answer. All Calls: Calls are diverted immediately i.e., no calls are signalled to this /phone number on your base.
Making calls using network services Activating/deactivating call waiting Prerequisite for calls via VoIP: At least two parallel VoIP connections are permitted on your telephone (setting can be changed via the Web configurator). v ¢ Ç Select Services ¢ Call Waiting Select On / Off to activate/deactivate call waiting. ¤ Press the display key §Save§. Call waiting is activated/deactivated for all connections to the telephone and all registered devices.
Making calls using network services Configuring settings for the next call Activating "anonymous calling" for the next call You can withhold your phone number for the next call (CLIR = Calling Line Identification Restriction). The setting applies to all the phone's connections. In idle status: v ¢ Ç Select Services ¢ Next Call ¢ Withhold Number Select and press §OK§. ~ Enter the number or copy from the directory. §Dial§ Press the display key or pick up the receiver. The number is dialled.
Making calls using network services Ringback when no answer: The ringback will take place as soon as the party in question has made a call. Initiate ringback: Prerequisite: You have dialled a number and set your fixed line connection or an MSN for your connection as the send connection. §Ringback§ Press the display key. If ringback has been successfully activated, the message Ringback activated is displayed. The call is ended. The base returns to idle status.
Making calls using network services Please note You can also select the second participant's phone number from the directory (page 73), redial list or a call list (page 66). Ending a consultation call (VoIP) §Options§ ¢ End Active Call You are reconnected to the first call participant. If you have established the consultation call via your fixed line connection, you can also end the consultation call by replacing the receiver. The connection is briefly interrupted and you will receive a call back.
Making calls using network services Identifying nuisance callers – identify caller function The telephone is connected to the network: Identify caller is used to identify annoying or threatening callers. Prerequisites: u You have requested the identify caller function from your network provider. u You are conducting an external call via an connection. Activate this function during the call or immediately after the caller has hung up. You must not end the call yourself i.e.
Using lists Using lists The options are: u Redial list u Call lists u Missed alarms list u Answering machine list Redial list The redial list contains the 20 numbers last dialled with the base (max. 32 digits). If one of the numbers is in the directory, the corresponding name will be displayed. Manual redial Q Press the key to open the redial list. s Select entry. c Pick up the receiver. The number is dialled.
Using lists Managing entries in the redial list In idle status: Q Press the key. s Select entry. §Options§ Open menu. You can select the following functions with q: Copy to Directory Copy an entry to the directory (page 69). Automatic Redial ¢ "Automatic redial", page 65. Display Number (As in the directory, page 71) Delete Entry Delete selected entry. (As in the directory, page 71) Delete List Delete complete list.
Using lists List entry Please note New messages are displayed at the top. Example of list entries: Missed Calls ™ Frank for IP2 07. 14.
Using lists Opening lists with the message key Use the message key f to open the following lists: u Answering machine list or network mailbox, if your network provider supports this function and quick dial is set for the network mailbox (¢ page 98). u Missed calls list u Missed alarms list An advisory tone sounds as soon as a new entry appears on a list. The f key flashes (it goes off when the key is pressed). In idle status, the display shows an icon for the new message: Icon New message ... Ã ...
Using directories Using directories Saving number(s) in the directory – new entry The options are: u (Local) directory (¢ page 69) u Public online directory and classified directory (¢ page 74) u Gigaset.net directory) (¢ page 78) u Private net directory s ¢ ¤ You can enter data in the following fields: Using the local base directory You can save a total of 1000 entries in the directory.
Using directories Caller Picture: Prerequisite: Calling Line Identification Presentation (CLIP). You can select: – A picture to be displayed when the party calls (see Resource directory, page 122). – One of the colours from Color 1 to Color 6, to be used as the display colour when the caller calls. – No Picture if there is to be no visual signal for the caller §Save§ Press the display key. Order of directory entries Directory entries are generally sorted alphabetically by surname.
Using directories Managing directory entries Viewing entries s ¢ s (Select entry). §View§ / w q Press the display key or the middle of the control key. The entry is displayed. Scroll through the entry if necessary. Using other functions Prerequisite: The directory was opened while the base was in idle status. §Options§ Press the display key. You can select the following functions with q: Display Number Select a number from the entry as required and press the display key §Dial§.
Using directories Sending a directory/directory entries to a handset s ¢ s (Select entry) ¢ §Options§ (Open menu) ¢ Copy Entry / Copy List ¢ to Internal s Select the internal number of the receiving handset and press §OK§. The transfer begins. You can transfer several individual entries one after the other by responding to the Entry copied - Copy next entry? prompt with §Yes§, selecting the entry and §Copy§, or pressing the middle of the control key w.
Using directories Adding a displayed number to the directory Copying a number or e-mail address from the directory You can add numbers to the directory: u From a list e.g., the call/answering machine list or the redial list u From a public online directory or classified directory u From your private net directory u When dialling a number In some operating situations, you can open the directory to copy a number or e-mail address, for example. Your base does not have to be in idle status.
Using directories Deactivating anniversaries s ¢ s (Select entry) §View§ §Edit§ Press the display keys one after the other. s Scroll to the Anniversary: line. v Select Off. §Save§ Press the display key. Anniversary reminder call In idle status, a reminder call is shown in the display of the handset (¢ page 4) and signalled with the selected ringer. You can: §OFF§ Press the display key to acknowledge and end the reminder call.
Using directories Searching for an entry Prerequisite: You have opened the online directory/classified directory. ¤ You can enter data in the following fields: Last Name: (online directory) or Category/Name: (classified directory) Enter the name, part of a name or the business type (max. 30 characters). City: Enter the name of the town/city in which the party you are searching for lives (max. 30 characters).
Using directories You have the following options: ¤ You can scroll through the list with q. ¤ Press the display key §View§. Displays the full details of the entry (name, business type where applicable, address, telephone numbers). You can scroll through the entry with q. Use §Options§ to access the following options: Refine search Refine search criteria and restrict hit list (¢ page 76). New search Start a new search. Copy to Directory Copy an entry to the local directory.
Using directories Using the private net directory Some providers offer users the option of creating and managing a private net directory on the Internet. The advantage of an online directory is that you can call up entries from any telephone or PC e.g., from your VoIP phone in the office or your PC at a hotel. You can use the private net directory on your base. Prerequisites: u You can create your private net directory using your PC's Web browser.
Using directories Please note You can copy numbers from a public directory to your private online directory (¢ page 76). Calling up an entry in the online directory Prerequisite: You have opened the online directory. q Select entry (open the details view, if necessary). c Pick up the receiver. If the entry only contains one phone number, this is the one that is dialled. If the entry contains more than one phone number (e.g., mobile number and phone number), they are offered to you for selection.
Using directories ¤ Press the right-hand display key §Save§. Data protection notice If you enter a nickname at this point, it is stored on a central Gigaset server. The nickname appears in the Gigaset.net directory, and other subscribers that use the Gigaset.net service can call you using this nickname. By entering your data, you agree to having your data saved. If you do not wish this to happen, you can cancel the operation at this point. Further information about the Gigaset.
Using directories Viewing the subscriber's number q Select the subscriber from the hit list. §View§ Press the display key. The display shows the Gigaset.net number and the subscriber's name, whereby the name may appear over a number of lines. q Display the name and number of the next/previous subscriber in the hit list. Please note u Connections to Gigaset.net are always established via the Internet. This is regardless of the send connection configured/selected on your base. u You can open the Gigaset.
Using directories Data protection notice If you enter a nickname at this point, it is stored on a central Gigaset server. The nickname appears in the Gigaset.net directory, and other subscribers that use the Gigaset.net service can call you using this nickname. By entering your data, you agree to having your data saved. If you do not wish this to happen, you can cancel the operation at this point. Further information about the Gigaset.net service data saved can be found at www.gigaset.
Making cost-effective calls Making cost-effective calls Make phone calls through a network provider who offers cheap rates (call-by-call). Using the Internet (VoIP) is the preferred cost-effective way of making calls. Defining dialling plans You can also use your phone's cost control function for calls to fixed line or mobile networks. In addition to your fixed line connection, you can open accounts with various VoIP providers offering favourable rates for calls to other networks.
E-mail notifications E-mail notifications Your phone will notify you when new e-mail messages have been received on your incoming e-mail server. You can set your phone to periodically connect to your incoming e-mail server and check whether you have new e-mail. Any new e-mail messages that have been received are displayed on the base and on all Gigaset handsets that have been registered: you will hear an advisory tone, the message key f will flash and the Ë icon will be displayed in the idle display.
E-mail notifications Please note Many e-mail providers activate spam protection measures by default. E-mail messages classified as spam are stored in a separate folder and are therefore not shown in the incoming mail list. Some e-mail providers allow you to deactivate spam protection or show spam e-mails in the incoming mail list. Other e-mail providers may send a message to the inbox when a new spam e-mail is received. This is to inform you that a suspected spam e-mail has been received.
E-mail notifications Deleting e-mail messages Please note If the e-mail does not contain any standard text, the message E-mail can’t be displayed. will briefly appear. View e-mail sender's address Prerequisite: You have opened the e-mail notification to read it (¢ page 84). §From§ Press the display key. The sender's e-mail address is displayed, over several lines if necessary (maximum 60 lines). §Back§ Press the display key to return to the incoming message list.
Info centre – continuous Internet access from your phone Info centre – continuous Internet access from your phone You can use your base to retrieve online content from the Internet i.e., request info services that are provided specifically for the telephone. The info services available are constantly updated. A default selection has already been made, but you can change these settings and add new services. Visit the Gigaset.net page www.gigaset.net on the Internet and compile your personal info services.
Info centre – continuous Internet access from your phone Authorization failed. Login has failed. Possible causes of this are: u You have not entered your login data correctly. ¤ Reselect the info service and repeat the login process. Please remember that data is case sensitive. u You are not entitled to access this info service.
Info centre – continuous Internet access from your phone ¤ You can identify a hyperlink of this type ¤ by the fact that §Call§ is shown above the right display key. Press the display key Ó to copy the phone number to the local directory on your base. Or: ¤ Press §Call§ to call the stored number. Depending on the provider, if you press §Call§, u The number is dialled directly u The number appears first in the display, in which case you must first confirm the number before it is dialled.
Operating the base's answering machine Operating the base's answering machine You can operate the answering machine that is integrated into the base using the keys on the base (¢ page 3), via a registered handset or by remote operation (other phone/ mobile). You can only record own announcement message or advisory message via the base or a handset. The base has three answering machines (AM1, AM2, AM3), which can be activated and used independently of each other.
Operating the base's answering machine Operating via the base The speaker activates automatically if you receive an acoustic prompt or message while operating. You can deactivate handsfree mode by picking up the receiver. Operation via the menu on the base is the same as operation via a registered Gigaset SL78H, SL400H or S79H handset. Activating/deactivating and setting answering machine mode You can choose between Answer & Record, Answer only and Alternating.
Operating the base's answering machine Recording a personal announcement/advisory message The base is supplied with pre-recorded announcements for answer and record mode and for answer only mode. If a personal announcement has not been recorded, the relevant pre-recorded announcement is used. You can record your own personal announcement for answer and record mode and answer only mode for each answering machine.
Operating the base's answering machine Deleting announcements/advisory messages v ¢ Ì ¢ Announcements ¢ Delete Announcemnt. / Delete Advisory Msg. q If necessary, select answering machine and press §OK§. §Yes§ Press the display key to confirm the prompt. Once you have deleted your announcement for the specified answering machine, the relevant pre-recorded announcement is used again.
Operating the base's answering machine Marking a message as "new" A previously played back "old" message is displayed as a "new" message again. During message playback or pause: * Press the star key. Or: §Options§ Open menu. Mark as New Select and press §OK§. An announcement informs you of the message's new status. Playback of the current message is cancelled. Playback of next message starts, if applicable. The f key on the handset flashes.
Operating the base's answering machine Activating/deactivating two-way record You can record an external call with the answering machine. Prerequisite: You are conducting an external call: ¤ Inform the caller that the call is being recorded. §Options§ Open menu. Two-way Record Select and press §OK§. Two-way record is indicated on the display by an advisory text and is added to the answering machine list as a new message. §End§ Press the display key to stop two-way record.
Operating the base's answering machine Setting the recording parameters The answering machine has already been preset at the factory. You can adjust individual settings via the base or a registered handset. v ¢ Ì ¢ Recordings ¤ You can enter data in the following fields: Length: Select maximum recording length 1 Min., 2 Min., 3 Min. or Maximum. Quality: Select Excellent or Long Play recording quality. If the quality is higher, the maximum recording time is reduced.
Operating the base's answering machine Calling the answering machine and playing messages ~ 9~ ~ Dial your own number. When you hear your announcement: Press 9. The announcement is aborted. Enter system PIN. You are informed whether any new messages have been recorded. The messages are now played back. You can now operate the answering machine with the keypad. The following keys are used for operation: A During time stamp playback: Skip to previous message.
Using the network mailbox Using the network mailbox Some providers offer answering machines on the network – network mailboxes. Each network mailbox accepts incoming calls made via the corresponding line (fixed line or corresponding VoIP phone number). To record all calls, set up network mailboxes for the fixed line and for each of your VoIP connections. You must have requested the network mailbox for your fixed line connection from your network provider.
Using the network mailbox Configuring an answering machine for quick dial You can use quick dial to make direct calls to a network mailbox or the integrated base answering machine. Assigning key 1, changing assignment Quick dial settings are device-specific. You can assign a different answering machine to key on the base and each registered handset. No answering machine is preconfigured for quick dial in the default settings. Press and hold key .
Using the network mailbox Displaying new messages in the handset's idle display If a new message is present on one of the network mailboxes assigned to the base via its receive connection, or there is a new message on the local answering machine, the à icon and the number of new messages are shown on the handset's idle display. The f message key flashes.
ECO DECT: Reducing energy consumption and radiation ECO DECT: Reducing energy consumption and radiation You are helping to protect the environment with your Gigaset phone. Reduced energy consumption Your base has a power-saving adapter plug and uses less power. Reducing radiation The radiation reduces automatically depending on the distance of the registered handsets to the base. The closer the handsets are to the base, the lower the radiation.
Setting an appointment (calendar) The selected day is outlined in orange. The current day is outlined in white. After selecting the day: w Press the centre of the control key. u If appointments have already been entered, this will open the list of saved appointments on that day. Use ¢ §OK§ to open the window and enter a new appointment. u If no appointments have been entered, the input window will open immediately to add the new appointment.
Setting an appointment (calendar) Managing appointments v ¢ Í Organizer ¢ Calendar Editing individual appointments r/q Select a day in the graphical calendar and press the control key w. (Days on which appointments/anniversaries have already been saved are highlighted in orange in the calendar). A list containing the entries for this day is displayed. Anniversaries are marked with j, activated appointments with μ. q Select appointment/anniversary. §§View§§ Press the display key to view the entry.
Setting the alarm clock Setting the alarm clock Prerequisite: The date and time have already been set (page 123). Activating/deactivating the alarm clock and setting the wake-up time v ¢ Í Organizer ¢ Alarm Clock ¤ You can enter data in the following fields: Status: Select On or Off. Time: Enter the wake-up time in 4-digit format. Occurrence: Select Daily or Monday-Friday. Volume: Set the volume for the alarm (1–5) or crescendo ring (volume increases with each ring = ‡).
Connecting/using other devices Connecting/using other devices You can upgrade your base to a "PABX" by connecting other communication devices. You can register up to six handsets to your base. Each registered device is assigned an internal number (2–7) and an internal name (INT 2–INT 7). You can change the number assignment and names. If all internal numbers have already been assigned on your base, you must deregister a handset that is no longer required before registering a new one.
Connecting/using other devices Please note All base connections are assigned to a handset as receive connections as soon as registration is complete. If a mobile is registered via Bluetooth, its GSM connection is also assigned to the handsets as a receive connection. When connection to the analogue fixed line is established, this connection is assigned to the handset as a send connection.
Connecting/using other devices If the internal party cannot be reached (e.g., out of range) or does not answer, or three internal connections are already established, the busy tone sounds. Calling all internal parties ("group call") u Press and hold left on the control key. All handsets are called. Or: u Initiate internal call. * Press the star key. Or: u Initiate internal call. Call All Select c Pick up the receiver. All handsets are called.
Connecting/using other devices External call waiting during an internal call Internal call waiting during an internal/external call If you receive an external call during an internal call, you will hear the call waiting tone (short tone). The caller's number or name appears in the display if Calling Line Identification is enabled. If an internal participant attempts to call you while you are involved in an external or internal call, this call is shown on the display (internal call waiting).
Connecting/using other devices Changing the internal number of an internal party The base is assigned the internal number INT 1 as a default setting. A handset is automatically assigned the lowest free internal number from 2–7 during registration. If all numbers are in use, then the number 7 is overwritten as long as this handset is in idle status. You can change the internal number of the base and all registered handsets (1–7). u Open the list of internal parties. Your own device is marked with < .
Connecting/using other devices Registering Bluetooth devices Cancelling/repeating current search To register a Bluetooth device, you need to search for it and then add it to the list of known devices. The list of known devices can hold a maximum of one headset and five data devices/ mobiles. Cancel the search: Press the display key. Repeat search if necessary: In the known devices list: §Options§ Press the display key. Repeat Search Select and press §OK§.
Connecting/using other devices ¤ If you press the display key §No§, the device is not registered and the base returns to the list of found devices. ¤ If you wish to replace a device in the list, press the display key §Yes§. A list of the registered (known) data devices and mobiles is displayed. ¤ Select the device to be replaced and press the display key §OK§. You will need to enter a PIN to register the new device (see above).
Connecting/using other devices Please note u If you de-register an activated Blue- tooth device, it may try to reconnect as an "unregistered device". u If you de-register the activated mobile (¢ page 110), no other mobile from the list will be activated. Entering/editing the name of a Bluetooth device Open the list ¢ s (select entry) Either: §Options§ Press the display key. Rename Select and press §OK§. Bluetooth is activated, if necessary. Or: §View§ Press the display key. §Edit§ Press the display key.
Connecting/using other devices Please note u If you only accept the registration of a headset on a temporary basis, the headset is not deleted from the known devices list. u If the list of known devices already contains five data devices/mobiles, you will be asked to delete a device from the list first (¢ page 109). Changing the Bluetooth name of the base You can change the base name used to identify it on the display of another Bluetooth device.
Connecting/using other devices Please note For instructions on sending vCards to a Bluetooth device or receiving them from a Bluetooth device, see page 72. Using GSM mobiles (Link2mobile) You can conduct calls on your base and/or a registered handset via the GSM connection on your Bluetooth GSM mobile (call external parties via the GSM connection on the mobile or accept calls via the GSM connection) if the following prerequisites are met: u Bluetooth mode is activated on the base and mobile (¢ page 108).
Connecting/using other devices Connecting a fax machine You can connect an ITU-T Group 3 fax machine to the base via the FAX port. 3 1 2 You do not explicitly have to register the fax machine to the base. It is automatically "registered", once you activate the FAX port on the base (¢ page 130, default setting is "off"). Once the FAX port is switched on, the fax machine is added to the list of internal parties with the internal name INT 8.
Connecting/using other devices Connecting and using a wire-bound headset You can connect a headset to the base using a 2.5 mm jack connector. For details about your headset, see the accompanying user guide. Connecting the headset ¤ Before you connect the headset, assign the Headset function to a function key on the base (¢ page 116). ¤ Next, plug the jack connector on your headset into the connection socket on your base (¢ page 12).
Setting up the base Setting up the base Your base is preconfigured but you can change the settings to suit your individual requirements. The settings described in this chapter only have a local effect on the base. The corresponding setting on any of the registered handsets does not change. Accessing functions and numbers quickly You can program the six function keys on the right-hand side of the base and the display keys (in idle status).
Setting up the base R Function Analogue fixed line: Key inserts a recall (an R) when entering a number (¢ page 134). VoIP connections: You can assign the R function via the Web configurator (Web page Advanced Settings): – Connect two external callers with one another (after a consultation call, when call swapping) Or – With a provider-specific feature for the VoIP connection Refer to the Web configurator's user guide on the enclosed CD. More Functions...
Setting up the base Changing the display language You can view the display texts in different languages. v ¢ Ï Settings ¢ Language The current language is indicated by a Ø. s Select a language and press §Select§. The selected language is set immediately. If you accidentally choose a language you do not understand: v*#Q3# Press keys in sequence. s Select the correct language. §Select§ Press the right display key.
Setting up the base Activating/deactivating the info ticker You can display text information from the Internet (weather information etc.) that is set for the screensaver Info Services as a scrolling message in the idle display. The scrolling message is shown in the bottom line of the idle display (immediately above the display keys). The end of one set of information and beginning of the next are separated by "+++".
Setting up the base Setting ringers Setting the volume You can choose between five volumes (1–5; e.g., volume 3 = Š) and the "crescendo" ringer (6; volume increases with each ring = ‡). You can set different volumes for the following functions: u For Internal Calls and Appointments (Appointments ¢ page 100) u For external calls v ¢ ÏSettings ¢ Audio Settings ¢ Ringer Settings ¢ Volume r If necessary, set the volume for internal calls and appointment notification. s Scroll to the next line.
Setting up the base Setting time control for external calls You can specify a time period when you do not want the base to signal external calls e.g., during the night. Prerequisite: The date and time have already been set. v ¢ Ï ¢ Audio Settings ¢ Ringer Settings ¢ Time Control ¤ You can enter data in the following fields: For external calls: Select On or Off. The following fields only appear when For external calls = On. Suspend ring from: Enter the start of the period in 4-digit format.
Setting up the base Activating/deactivating advisory tones Your handset uses advisory tones to tell you about different activities and statuses. The following advisory tones can be activated/ deactivated independently of each other: u Key click: every key press is confirmed.
Configuring the system settings If you have saved a picture in an invalid file format, you will see an error message after selecting the entry. Playing back sounds v ¢ É Additional Features ¢ Resource Directory ¢ Sounds ¢ (select entry) The selected sound is played back immediately. Switch between the sounds using the q key. You can adjust the volume during playback: ¤ Adjust the volume using the R / S keys and pressing the display key §Save§.
Configuring the system settings ¤ You can enter data in the following fields: Date: Enter day, month and year as an 8-digit number via the keypad. e.g., QM 42Q for 07/14/2011. Time: Enter the hours and minutes in 4-digit format via the keypad, e.g., QM 5 for 07:15 am. ¤ If necessary, press the display key §am/pm§ to switch between am and pm. ¤ Press the display key §Save§ to save the settings. Protecting against unauthorised access Protect the base system settings with a PIN known only to you.
Configuring the system settings Setting the base's IP address in LAN Prerequisite: Your base is connected to a router or a PC (¢ page 16). An IP address is required in order for the LAN to "recognise" your base. The IP address can be assigned to the base automatically (by the router) or manually. u If done dynamically, the router's DHCP server automatically assigns an IP address to the base. The base's IP address can be changed according to router settings.
Configuring the system settings Setting up/deleting connections (MSNs) Prerequisite: Your base is connected to the network. Your connection offers you two telephone lines (B channels) that you can use simultaneously. You can set up a maximum of ten separate phone numbers (MSNs) on your base. You are assigned these phone numbers by your network provider. Please note There are several ways of assigning an MSN to extension systems.
Configuring the system settings If the MSN you have deleted was the send connection (page 104) of an internal party then a new send connection (the MSN with the lowest ranked number) will automatically be assigned to this internal party. Configuring VoIP connections Each time you run the IP wizard you can configure/reconfigure one VoIP connection (IP account). ¤ Restart the IP wizard if you wish to configure/reconfigure another VoIP connection.
Configuring the system settings Assigning send and receive connections to internal parties If you have several connections configured for your telephone system, you can do the following for each internal party: u Assign a send connection or allow the internal party to select the line for each external call (select line). u Assign one or several receive connections. Only calls received via one of the assigned connections are signalled on the device.
Configuring the system settings A list of all configured connections and the Gigaset.net connection is opened. You can select Yes or No for each connection. r Select Yes if you want the relevant connection to be the receive connection for the internal party.Select No if it should not be the receive connection. s Change to the next connection. ¤ Repeat these two steps for each connection. ¤ Press the display key §Save§ to save the changes.
Configuring the system settings Updating firmware automatically Your base will check daily whether a newer firmware version is available from the Internet on the configuration server. If firmware updates are available, the message New firmware available. Update? is displayed in the idle display of the base. §Yes§ Press the display key to confirm the prompt. The firmware is loaded onto your base. If you answer the prompt with §No§, the base returns to idle status.
Configuring the system settings Restoring the base to the default settings Checking the base's MAC address The individual settings are reset. When the settings are restored: u Handsets are still registered u The system PIN is not reset. Depending on your network configuration, you may have to enter your base's MAC address in your router's access control list, for example. You can check the MAC address on the base. In idle status: v Open menu. *#Q5# 2 Q Press keys in sequence.
Configuring the system settings Once the network has been identified, the following appears in the display: Adapt system configuration to public network? Or: Adapt system configuration to ISDN network? ¤ If the network has been identified correctly, press the display key §Yes§. If you wish to repeat the network identification procedure, press the display key §No§ instead.
Connecting the base to a PABX Connecting the base to a PABX The following settings are only necessary if your PABX requires them; see the PABX user guide. Please note There are several ways of assigning an MSN to extension systems. For more information on this topic, please refer to the user guide belonging to your extension system. Saving an access code (outside line code) You can save two access codes: one for dialling via or fixed line and one for dialling via VoIP.
Connecting the base to a PABX Setting pauses (fixed line) Changing the pause after line seizure You can change the length of the pause that is inserted between picking up the receiver c and sending the number. v Open the main menu. *#Q5# L Press keys in sequence. ~ Enter number for the length of the pause (1 = 1 sec.; 2 = 3 secs; 3 = 7 secs) and press §OK§. Changing the pause after recall key You can change the length of the pause if your PABX requires this (refer to the user guide for your PABX).
Connecting the base to a PABX Selecting dialling mode/ options The keypad function allows you to control certain features by entering sequences of characters and digits. The keypad function must be activated when you connect your base to an PABX or exchange (e.g., Centrex) that is controlled using keypad protocol. The digits/characters 0–9, * and # are sent as keypad information elements. Please ask your service provider about the information and codes you can transmit.
Industry Canada Certification Industry Canada Certification Operation is subject to the following two conditions (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. NOTICE: The Industry Canada label identifies certified equipment.
FCC / ACTA Information service. If you experience trouble with this telephone system, disconnect it from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. If trouble is experienced with this equipment, for repair or warranty information, please contact Support at 1-866 247-8758. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
FCC / ACTA Information 4. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 5. Place this product securely on a stable surface. Serious damage and/or injury may result if the unit falls. 6. Slots or openings in the cabinet and the back and bottom are provided for ventilation, to protect it from overheating. These openings must not be blocked or covered.
Service (Customer Care) Service (Customer Care) Customer Care Warranty for Cordless Products To obtain Customer Care Warranty service, product operation information, or for problem resolution, call: Toll Free: 1-866 247-8758 End-user limited warranty This product is covered by a one year limited warranty. Any repair replacement or warranty service, and all questions about this product should be directed to: 1-866 247-8758.
Service (Customer Care) – Payments for labor or service to representatives or service centers not authorized to perform product maintenance by Gigaset NAM. – Loss of data. – Testing and examination discloses that the alleged defect or malfunction in the Product does not exist. This warranty does not cover customer education, instruction, installation or removal, set up adjustments, problems related to service(s) provided by a carrier or other service provider, and/or signal reception problems.
Service (Customer Care) Any supplements or updates to the Product or the software in the Product, including without limitation, any (if any) software fixes or upgrades or bug fixes provided to you after the expiration of the one year limited warranty period are not covered by any warranty or condition, express, implied or statutory. 8.
Service (Customer Care) Questions and answers If you have any questions about the use of your base, visit our website at www.gigaset.com/service for assistance 24/7. The table below contains a list of common problems and possible solutions. Registration or connection problems with a Bluetooth headset. ¥ ¥ ¥ Reset the Bluetooth headset (see the user guide for your headset). Delete registration data from the base by deregistering the device ( page 110). Repeat the registration process ( page 109).
Service (Customer Care) You hear an error tone when keying in information (a descending tone sequence). Firmware update or VoIP profile download is not carried out. Action has failed/invalid input. Repeat the process. Watch the display and refer to the user guide if necessary. 1. If Currently not possible is displayed, the VoIP connections may be busy or a download/ update is already being carried out. Repeat the process at a later date. No time is specified for a message in the call list. 2.
Service (Customer Care) Exclusion of liability Some displays may contain pixels (picture elements), which remain activated or deactivated. As a pixel is made up of three sub-pixels (red, green, blue), it is possible that pixel colours may vary. This is completely normal and does not indicate a fault. VoIP status codes In the following tables you will find the meaning of the most important VoIP status codes and messages. Status Meaning code 0x31 IP configuration error IP domain not entered.
Service (Customer Care) Status Meaning code Status Meaning code 0x400 Wrong call 0x485 The URI dialled is not unique and cannot be processed by the VoIP provider. 0x401 Not authorised 0x403 The requested service is not supported by the VoIP provider. 0x404 Wrong phone number. No connection on this number. Example: While making a local call you have not dialled the area code although your VoIP provider does not support local calls. 0x405 Method not permitted. 0x406 Not acceptable.
Service (Customer Care) Status Meaning code 0x504 Time limit exceeded at the gateway. 0x505 The server rejects the query because the indicated version number of the SIP protocol does not concur with at least the version that is used by the server or SIP device involved in this query. 0x515 The server rejects the query because the message exceeds the maximum permitted size. 0x600 The called party is busy. 0x603 The called party has rejected the call.
Environment Unlock System (only if the device has been locked by the provider) Confirm selection with §OK§. If necessary you can unlock a provider-specific device lock with a corresponding code. Update Profile Confirm selection with §OK§. Your current VoIP provider profiles (general provider data for all configured VoIP connections) are automatically loaded onto your phone. The general settings for all VoIP connections for which profiles are available on the Internet are updated.
Appendix Ecological energy consumption Appendix The use of ECO DECT (¢ page 100) saves energy and makes an active contribution towards protecting the environment. Caring for your telephone Disposal All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
Appendix Writing and editing text General specifications Interfaces analogue fixed line, Ethernet, Bluetooth DECT standard Supported GAP standard Supported No.
Appendix Writing names Press the relevant key several times to enter letters/characters. ¤ Enter the individual letters/characters by pressing the corresponding key. The characters assigned to the key are shown in a selection line at the bottom left of the screen. The selected character is highlighted. ¤ Briefly press the key several times in succession to select the required letter/character. If you press and hold the key, the corresponding digit is inserted.
Appendix Data transfer During the transfer of data between the base and PC, the message Data transfer in progress is shown on the display. Any incoming calls are ignored during this time. You can use the red end key T to cancel the data transfer. You cannot enter anything else via the keypad while data transfer is in progress. The corresponding source code can be requested from Gigaset Communications GmbH, but this will incur a EUR 10 processing charge for the provision.
Appendix GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 021111307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
Appendix You may charge a fee for the physical act of transferring a copy, and you may, at your discretion, offer warranty protection in exchange for a fee. 2.
Appendix 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5.
Appendix NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Appendix This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. GNU Lesser General Public License (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc.
Appendix For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.
Appendix You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library.
Appendix When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
Appendix 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9.
Appendix NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Glossary Glossary Asymmetric Digital Subscriber Line Call swapping Call swapping allows you to switch between two callers or between a conference and an individual caller without allowing the waiting caller to listen to the call. Call waiting Special form of DSL. = CW ALG Network provider feature. A beep during a call indicates that another caller is waiting. You can accept or reject the second call. You can activate/deactivate the feature. Client Application that requests a service from a server.
Glossary COLP/COLR Connected Line Identification Presentation/ Restriction Feature provided by a VoIP connection for outgoing calls. COLP displays the phone number accepting the call on the calling party's display unit. The number of the party accepting the call is different to the dialled number, e.g., if the call is diverted or transferred. The called party can use COLR (Connected Line Identification Restriction) to prevent the number from appearing on the calling party's display.
Glossary Dynamic IP address A dynamic IP address is assigned to a network component automatically via DHCP. The dynamic IP address for a network component can change every time it registers or at certain time intervals. See also: Fixed IP address DynDNS Dynamic DNS Domain names and IP addresses are assigned via DNS. For Dynamic IP addresses this service is enhanced with "Dynamic DNS". This permits the use of a network component with a dynamic IP address as a Server on the Internet.
Glossary G G.711 a law, G.711 µ law Standard for a Codec. G.711 delivers a very good voice quality that corresponds to that in the network. As there is little compression, the necessary bandwidth is around 64 kbit/s per voice connection, but the delay caused by coding/decoding is only approx. 0.125 ms. "a law" describes the European standard and "μ law" describes the North American/Japanese equivalent. G.722 Standard for a Codec. G.
Glossary I IEEE Institute of Electrical and Electronics Engineers International body that defines standards in electronics and electrical engineering, concerned in particular with the standardisation of LAN technology, transmission protocols, data transfer rate and wiring. Infrastructure network Network with central structure: All Network subscribers communicate via a central Router. Internet Global WAN. A series of protocols known as TCP/IP have been defined for exchanging data.
Glossary M N MAC address NAT Media Access Control address Network Address Translation Hardware address by means of which each network device (e.g., network card, switch, phone) can be uniquely identified worldwide. It consists of six parts (hexadecimal numbers) separated by "-" (e.g., 00-90-65-44-00-3A). The MAC address is assigned by the manufacturer and cannot be changed. Mbps Method for converting (private) IP addresses to one or more (public) IP addresses.
Glossary P Paging (handset search) Base function for locating the registered handsets. The base establishes a connection to every registered handset. The handsets start to ring. PIN Personal Identification Number Protects against unauthorised use. When the PIN is activated, a number combination has to be entered to access a protected area. You can protect your base configuration data with a system PIN (4-digit number combination). Port Data is exchanged between two applications in a Network via a port.
Glossary R RAM Random Access Memory Memory in which you have reading and storage rights. Items such as melodies and logos are saved in the RAM after you have loaded them onto the phone via the Web configurator. Registrar The registrar manages the Network subscribers' current IP addresses. When you register with your VoIP provider, your current IP address is saved on the registrar. This means you can also be reached when on the move.
Glossary SIP proxy server IP address of your VoIP provider's gateway server. Static IP address See Fixed IP address. STUN Simple Transversal of UDP over NAT NAT control mechanism. STUN is a data protocol for VoIP telephones. STUN replaces the private IP address in the VoIP telephone data packets with the public address of the secure private network. To control data transfer, a STUN server is also required on the Internet. STUN cannot be implemented with symmetric NATs.
Glossary URL Universal Resource Locator Globally unique address of a domain on the Internet. A URL is a subtype of the URI. URLs identify a resource by its location on the Internet. For historical reasons the term is often used as a synonym for URI. User name User ID Name/number combination for access e.g., to your VoIP account or your private address directory on the Internet. V Voice codec See Codec.
Accessories Accessories Gigaset handsets Upgrade your Gigaset to a cordless PABX: Gigaset SL400H handset Genuine metal frame and keypad High-quality keypad illumination 1.
Accessories Gigaset C610H handset u Social life management with room monitor and birthday reminders, One Touch Call mode Individual programming of ringtones with 6 VIP-groups High-quality keypad with illumination 1.
Accessories Gigaset E49H handset Resistant to shocks, dust and water splashes Hardy illuminated keypad Colour display Directory for up to 150 entries Talk/standby time of up to 12h/250h Standard batteries u Brilliant sound quality in handsfree mode u Screensaver u ECO DECT u Alarm clock u Room monitor www.gigaset.com/gigasete49h u u u u u L410 handsfree clip for cordless phones Move during a call without any restrictions Handy clip belt Brilliant sound quality in speaker mode Weight approx.
Index Index A Access code . . . . . . . . . . . . . . . . . . . . . . . . . 133 for a PABX . . . . . . . . . . . . . . . . . . . . . . . . . 133 Access protection . . . . . . . . . . . . . . . . . . . . 124 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Acknowledge tones . . . . . . . . . . . . . . . . . . 122 Activating advisory tones . . . . . . . . . . . . . . . . . . . . . 122 answering machine . . . . . . . . . . . . . . . . . 90 answering machine (remote operation). . . . . . . .
Index accepting (GSM connection) . . . . . . . . . 53 accepting on a headset . . . . . . . . . . . . . . 53 ending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ending on the headset . . . . . . . . . . . . . . 52 internal . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 picking up from answering machine . . . . . . . . . . . . . . . . . . . . . . . 93 transferring . . . . . . . . . . . . . . . . . . . . . 63, 134 transferring (connecting) . . . . . . . . 63, 106 two-way recording .
Index Deactivating advisory tones . . . . . . . . . . . . . . . . . . . . . 122 answering machine . . . . . . . . . . . . . . . . . 90 appointment . . . . . . . . . . . . . . . . . . . . . . 100 call divert . . . . . . . . . . . . . . . . . . . . . . . . . . 58 FAX port. . . . . . . . . . . . . . . . . . . . . . . . . . . 130 network mailbox . . . . . . . . . . . . . . . . . . . . 97 two-way recording . . . . . . . . . . . . . . . . . . 94 withholding phone numbers. . . . . . . . .
Index Environment . . . . . . . . . . . . . . . . . . . . . . . . . 147 Error tone . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Ethernet network . . . . . . . . . . . . . . . . . . . . 164 Explicit Call Transfer . . . . . . . . . . . . . . . . . . 164 External call call waiting . . . . . . . . . . . . . . . . . . . . . . . . . 59 to ans. mach. Divert . . . . . . . . . . . . . . . . . 93 F FAX port connecting fax . . . . . . . . . . . . . . . . . . . . . 114 Firewall . . . . . . . . . . . . . .
Index Electronics Engineers. . . . . . . . . . . . . 166 Internal conference . . . . . . . . . . . . . . . . . . . . . . . . 106 consultation . . . . . . . . . . . . . . . . . . . . . . . 106 making calls . . . . . . . . . . . . . . . . . . . . . . . 105 Internal call . . . . . . . . . . . . . . . . . . . . . . . . . . 105 call waiting . . . . . . . . . . . . . . . . . . . . . . . . 107 Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Internet access (broadband) . . . . . . . . . .
Index muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Million bits per second. . . . . . . . . . . . . . . . 167 Missed anniversary . . . . . . . . . . . . . . . . . . . . . . . . 102 appointment . . . . . . . . . . . . . . . . . . . . . . 102 call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Mobile activating (Bluetooth) . . . . . . . . . . . . . . 111 connecting (Bluetooth) . . . . . . . . . . . . . 113 MRU . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Proxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Proxy-Server . . . . . . . . . . . . . . . . . . . . . . . . . Public IP address . . . . . . . . . . . . . . . . . . . . . 168 168 168 168 Q Quality of Service . . . . . . . . . . . . . . . . . . . . 168 Questions and answers . . . . . . . . . . . . . . . 142 Quick dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 R RAM . . . . . . . . . . . . . . .
Index display backlight . . . . . . . . . . . . . . . . . . . 119 ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 TLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Tone dialling . . . . . . . . . . . . . . . . . . . . . . . . . 134 Transmission Control Protocol . . . . . . . . . 170 Transmission rate . . . . . . . . . . . . . . . . . . . . 170 Transport Layer Security . . . . . . . . . . . . . . 170 Transport protocol . . . . . . . . . . . . . . . . . . .
