MEGAPHONE" User Guide TB-2000 ff) Worlds First 4 GHz wees Ti-band Wireless System Far detailed product operation manual & information, fl bn ER
Safety Precautions Please read all safety precautions before using your megaphone to ensure safe and proper use. Your megaphone contains a rechargeable LI-Polymer battery. Allure to read and follow below instructions before using or charging the Li-Polymer battery may result in a fire, personal injury and damage to property if charged or used improperly. Never disassemble, modify, puncture, mechanically shock, or short circuit the device and battery for any reason.
Getting started I TB-2000 overview €F Shouderstraphangers £3 AUXIN €} AC adapter € Volume 2 Power P Outline © MCN £3 Speaker @ Beatific 3 LCD screen I 300TH overview £ Receiver Battery cover © Emitter £ MCN £3 Power €3 Battery & Volume indicator £3 Wireless connection & Charging Indicator $8 Volume UP € Volume DOWN £3 MUTE €3 SET & Ac adapter
Using TB-2000 I Turning power on / off Press ‘POWER’ button for 1~2 sec. (Battery status Is displayed on LCD while turned on} f Adjusting volume Turn the VOL’ knob to right towards “+ for up and left towards ** for down. I Connecting microphone 1 Direct connection : Plug a microphone into MIC IN". 2 Wireless connection : See ‘Using 300TH, f Connecting External Devices Connect various external devices such as additional amplifier/speaker, smartphone and more to your Megaphone using "LINE OUT and ‘AUX IN’.
Using 300TH By plugging a microphone Into 300TH, TB-2000 becomes a wireless microphone system | Turning power on / off Slide up the power switch to turn on & down to turn off. While turned on, the battery status LED and the wireless connection LED lights stays on. I Connecting with TB-2000 Pairing a single 300TH with TB-2000 + Turn on TB-2000 and aim IR emitter of 300TH at IR receiver of TB-2000. [300TH] Press & hold ‘SET and turn power on.
I Charging battery + Recharge when battery is low (1 bar) using provided charger. + When fully charged, the battery status will be 4 bars and the charging LED is solid blue. (Unplug the charger immediately to prevent overheating.) mom Using microphones | i-set mic 1 Assembling |-set Slide in the rigid part {i-set mic logo printed part) to the band's holder. * The loge should be visible when assembled. 2 Wearing your |-set Wear it on ears or turn the i-set band upside down and wear on your neck.