Safety Precautions Please read all safety precautions before using your megaphone to ensure safe and proper use. Your megaphone contains a rechargeable LI-Polymer battery. Allure to read and follow below instructions before using or charging the Li-Polymer battery may result in a fire, personal injury and damage to property if charged or used improperly. Never disassemble, modify, puncture, mechanically shock, or short circuit the device and battery for any reason.
In the box @ ® MG Charger SM-1000S (Transmitter) — as) (MG) boom Mic ® ® Hand Mic i-set Mic ear-set Mic Leather Pouch Pouch (MG) Bes B= J——— Shoulder Beltane Strap Mic Spangle User Guide AUX Cable The items supplied with your MEGAPHONE may vary depending on the stare you purchased.
Getting started I SM-1000S overview €) Shoulder strap hangers €3 AUXIN €} Beltane € Volume £3 Power © Battery cover @ MCN £) Speaker {P) Wireless Paling Buttonwood) € LCD screen € AC adapter Line Out I MG overview & Power € MCN €3 Wireless connection LED €3 AC adapter € Volume UP {3 Volume DOWN © MUTE £3} Wireless Pairing Buttonwood} £3 Battery status LED
Using SM-1000S I Turning power on / off Press ‘POWER’ button for 1~2 sec. (Battery status Is displayed on LCD while turned on} f Adjusting volume Turn the VOL’ knob to right towards “+ for up and left towards ** for down. I Connecting microphone 1 Direct connection : Plug a microphone into MIC IN". 2 Wireless connection : See ‘Using MG77". I Connecting External Devices Connect various external devices such as additional amplifier/speaker, smartphone and more to your Megaphone using "LINE OUT and ‘AUX IN’.
Using MG By plugging a microphone Ina MG, SM-10005 becomes a wireless microphone system. I Turning power on / off Slide up the power switch to turn on & down to turn off. While turned on, the battery status LED stays on (High = Green, Middle = Orange, Low = Red) | Connecting with SM-1000S = Turn on bath SM-1000S and MG for automatic connection. » The wireless connection LED {MG) lights up in green and C icon appears on the LCD (SM-1000s} indicating connection is made. (May take a few seconds.
Using microphones I i-set mic 1 Assembling |-set Slide in the rigid part (i-set mic logo printed part) to the band's holder. * The loge should be visible when assembled, 2 Wearing your |-set [ Wearing on ears ] Wear it on ears and adjust mic to a desired position. [ Wearing around neck ] Turn i-set band upside down and wear on your neck and adjust mic to a desired position. * For the best performance, mic and mouth should be about 12 om apart, To avoid howling, face the mic head upward.