User Manual

ManualsBrandsGigabyte ManualsComputers & AccessoriesX570 AORUS Elite Wi-Fi (AMD Ryzen 3000/X570/ATX/PCIe4.0/DDR4/Intel Dual Band 802.11AC Wi-Fi/Front USB Type-C/RGB Fusion 2.0/M.2 Thermal Guard/Gaming Motherboard)

Table Of Contents

Configuring Audio Input and Output

- 1 -

Table of Contents

Conguring Audio Input and Output ................................................................................2

1-1 Conguring 2/4/5.1/7.1-Channel Audio ............................................................... 2

1-2 Conguring S/PDIF Out ...................................................................................... 4

1-3 Stereo Mix ........................................................................................................... 5

1-4 Using the Voice Recorder ................................................................................... 6

Summary of content (6 pages)

PAGE 1
Table of Contents Configuring Audio Input and Output.................................................................................2 1-1 1-2 1-3 1-4 Configuring 2/4/5.1/7.1-Channel Audio................................................................ 2 Configuring S/PDIF Out....................................................................................... 4 Stereo Mix............................................................................................................
PAGE 2
Configuring Audio Input and Output After you install the included motherboard drivers, make sure your Internet connection works properly. the system will automatically install the audio driver from Microsoft Store. Restart the system after the audio driver is installed. 1-1 Configuring 2/4/5.1/7.1-Channel Audio The motherboard provides five audio jacks on the back panel which support 2/4/5.1/7.1-channel (Note) audio. The picture to the right shows the default audio jack assignments.
PAGE 3
Step 3: On the Speakers screen, click the Speaker Configuration tab. In the Speaker Configuration list, select Stereo, Quadraphonic, 5.1 Speaker, or 7.1 Speaker according to the type of speaker configuration you wish to set up. Then the speaker setup is completed. B. Configuring Sound Effect You may configure an audio environment on the Speakers tab. C.
PAGE 4
Step 2: On the Playback tab, make sure your headphone is set as the default playback device. For the device connected to the Line out jack on the back panel, right-click on Speakers and select Set as Default Device; for the device connected to the Line out jack on the front panel, right-click on Realtek HD Audio 2nd output. 1-2 Configuring S/PDIF Out The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality. 1.
PAGE 5
1-3 Stereo Mix The following steps explain how to enable Stereo Mix (which may be needed when you want to record sound from your computer). Step 1: Locate the icon in the notification area and right-click on this icon. Select Sounds. Step 2: On the Recording tab, right-click on Stereo Mix item and select Enable. Then set it as the default device. (if you do not see Stereo Mix, right-click on an empty space and select Show Disabled Devices.
PAGE 6
1-4 Using the Voice Recorder After setting up the audio input device, to open the Voice Recorder, go to the Start menu and search for Voice Recorder. A. Recording Audio 1. To begin the recording, click the Record icon . 2. To stop the recording, click the Stop recording icon B. Playing the Recorded Sound . The recordings will saved in Documents>Sound Recordings. Voice Recorder records audio in MPEG-4 (.m4a) format.