WatchMan3000NB Installation and Operations Manual
WatchMan3000NB Patrol Tour Collection Terminal with Bluetooth WatchMan3000NB gives accurate and authentic record of patrols carried out by security personnel. Location codes with date/time stamps of selected points on the patrol route are collected by scanning with the handsets the RFID tags fixed there. The handset's tamperproof memory can store about 8192 records and the data is transferrable to PC for viewing and archiving.
© GIGA-TMS INC. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Giga-Tms Inc. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4 WatchMan3000NB Table of Contents Foreword 0 6 Part I Installation 1 Gadget................................................................................................................................... List 6 2 Connect Device ................................................................................................................................... 7 3 Install Software ......................................................................................................................
Part I
6 1 WatchMan3000NB Installation List of items, connection and initial device setting. 1.1 Gadget List Sl. No. 1 2 3 4 5 6 7 Item WM3000NB BC3000N* RS232-USB Cable 5V DC Adaptor Cells AAA 1.5 Volt (2 no's) RFID Tag grey (1 no.) Belt Pouch Description Handset Base unit To connect with PC To power handset while uploading records To power handset WM3000NB For reading Test For handset WM3000NB * BC3000N already through the FCC authentication . © GIGA-TMS INC.
Installation 1.2 Connect Device Note: 1. Pages on the Display: a. Time/Date © GIGA-TMS INC.
8 WatchMan3000NB b. ID - Last location ID c. Record - Memory Level Used d. Battery - Remaining Level 2. The handset can function here without DC adaptor also but in that case it will switch off after 30 seconds (default setting time) to conserve battery power. © GIGA-TMS INC.
Installation 1.3 Install Software Note: * If not, click My Computer on desktop and double click the disk icon. ** Refer appendix chapter Software Installation Details for details. © GIGA-TMS INC.
10 WatchMan3000NB © GIGA-TMS INC.
Installation 1.4 Install Bluetooth Driver Opne WM3000NB Bluetooth function. © GIGA-TMS INC.
12 WatchMan3000NB Install your Bluetooth USB Adapter to PC . © GIGA-TMS INC.
Installation Add Bluetooth Device © GIGA-TMS INC.
14 WatchMan3000NB © GIGA-TMS INC.
Installation Input passkey ' 0000 ' © GIGA-TMS INC.
16 WatchMan3000NB © GIGA-TMS INC.
Installation Open Demo software ' Watchman Monitor ' and choose COM port or ' AUTO ' scan the WM3000NB. Finish WM3000NB Bluetooth connect , you can start login WM3000NB use the WatchMan Monitor functions. 1.5 Settings Before operating WatchMan3000N the following settings can be made: 1. ID for handset WM3000NB 2. Date & Time 3. Password © GIGA-TMS INC.
18 1.5.1 WatchMan3000NB Login © GIGA-TMS INC.
Installation Note: You will be logged out automatically when you 1. remove the handset from the base unit. 2. close the WatchMan Monitor. 3. click 'LOGOUT'. 1.5.2 ID © GIGA-TMS INC.
20 WatchMan3000NB * When more than one handset WM3000NB are used, Machine ID's and User Names can be assigned to each. © GIGA-TMS INC.
Installation 1.5.3 21 Date & Time Note: The host PC's time setting will be followed by handset WM3000NB. If the display time is not right, correct the PC's time. 1.5.4 Password © GIGA-TMS INC.
22 WatchMan3000NB Note: If you don't want to enter any password, just click 'OK'. From the next login you can enter by just clicking 'OK'. Note: If your lose your password, after 16 unsuccessful attempts you will receive a code. Send the code with a request to your distributors to recover your password; they will recover it for you. Refer Loss of Password © GIGA-TMS INC.
Part II
24 2 WatchMan3000NB Operation Patrol recording, transferring records to PC and erasing. 2.1 Record Patrol Fix the RFID tags supplied with WatchMan3000NB one each at selected locations on the route to be covered during patrol. Instruct the personnel to scan the tags during patrol as follows: 1. Switch on handset WM3000NB. 2. Press the scan button on the side. 3. Bring it near the tag (6 to 7 cm's) till a beep is heard. The beep sound indicates successful recording of the location/tag code.
Operation © GIGA-TMS INC.
26 WatchMan3000NB 2.3 Print 2.4 Erase Records Note: handset WM3000NB can store about 8192 records. © GIGA-TMS INC.
Part III
28 WatchMan3000NB 3 Appendix 3.1 Specifications Storage Records RFID Tag RFID read distance Interface Battery Life Cycle Battery Communication Interface Baud rate Dimensions Weight Safety Working Temperature Storage Temperature Humidity 3.2 8192 125KHz, ASK, 64 Bits, Manchester Coding App. 8192 records ISO card 125 KHz at 60~70mm up to 25000 above s (applying brand new DURACELL MN1500,LR6, DC 1.5V battery. Connection in one second.
Appendix © GIGA-TMS INC.
30 WatchMan3000NB © GIGA-TMS INC.
Appendix 31 Remove CD. 3.4 FirmWare Upgrade Step 1 Please check with the local distributor to obtain the latest firmware version by ROM-T0969.EHX Step 2 Connect WM3000NB to PC and enter into communication mode. Step 3 Run GIGA-TMS ROM Manager program. click on a correct PC comm. port. © GIGA-TMS INC.
32 WatchMan3000NB Step 4 Click on " Update " function button and click on latest ROM-T0969 path. Click on “ confirm “ button and the update will proceed. © GIGA-TMS INC.
Appendix 6. Firmware update will be completed. Note: If the update fails before completion you need to redo from step 3. 3.5 Communication Protocol Baud rate 19200 bps, None parity, 8 data bits, 1 stop bit Handshaking Protocol © GIGA-TMS INC.
34 WatchMan3000NB Control character table Card data string Date & Time WM3000N Terminal has an extensive list of Commands that allow manipulating its internal database, setting functional parameters and getting data on its current status. There are 2 levels of access to the WM3000N : User and Supervisor. Supervisor level is protected by a Password. Sensitive data can be downloaded or altered only on the Supervisor level. General Terminal data is available on the User level as well.
Appendix Reply Index Table Access Security Commands : Login : © GIGA-TMS INC.
36 WatchMan3000NB Logout : Set password : © GIGA-TMS INC.
Appendix Get machine name : Get number of record : © GIGA-TMS INC.
38 WatchMan3000NB Read record by number : Erase all record : Rollback database readout transaction : © GIGA-TMS INC.
Appendix Recovery all database readout transaction : Get product version : © GIGA-TMS INC.
40 WatchMan3000NB Set date and time : Get date and time : © GIGA-TMS INC.
Appendix Set machine ID : Get machine ID : Enter firmware management mode : © GIGA-TMS INC.
42 WatchMan3000NB Set register : Get register : Register table : © GIGA-TMS INC.
Appendix Bluetooth Module Config Command Product name : © GIGA-TMS INC.
44 WatchMan3000NB Pin code : Pair clear : © GIGA-TMS INC.
Appendix 3.6 Loss of Password © GIGA-TMS INC.
46 WatchMan3000NB STEP 4 Copy the code and mail it to support@gigatms.com.tw and your password will be recovered and sent to you. 3.7 Revision History Rev Number 01 Date Note MAY 2009 Initial Release © GIGA-TMS INC.
Index Index -RRESET TAG 21 RFID tags 24 RS232-USB cable 7 RS232-USB converter cable -88000 26 -Aaverage reading range 28 -Bbase unit BC3000N battery 28 BC3000N 24 7 -CCard Type 28 -Ddeletion, all records Dimensions 28 DISK5347 9 24 -LLast location ID 7 -OOperating Humidity 28 Operating Temperature 28 -Ppassword 21 PC's time 21 Power supply of BC3000N © GIGA-TMS INC.