TM970238
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
LIMITED WARRANTY Giga-Tms warrants that the products sold pursuant to this Agreement will perform in accordance with Giga-Tms’s published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from Giga-Tms (the “Warranty Period”). This warranty shall apply only to the “Buyer” (the original purchaser, unless that entity resells the product as authorized by Giga-Tms, in which event this warranty shall apply only to the first re-purchaser).
GIGA-TMS PROMAG FEATURES PIN DIAGRAMS Top View TXD RXD 3 2 1 5 4 6 D- /RST D+ C2CK PIO8 8 34 VDD PIO7 9 33 GND PIO6 10 32 GND PIO5 11 PIO4 12 31 ANT 30 GND PIO3 PIO2 13 29 GND 14 28 GND PIO1 15 27 GND PIO0 16 26 GND VRF 17 25 GND UM800H 18 19 20 21 22 23 24 PIO11 PIO10 PIO9 PIO13 PIO12 PIO15 PIO14 Access Control System Security System RFID Printer Mobile Phone Point of Sale Patrol System Portable Battery Device PIN #1 IDENTIFY 7 APPLICATI
UM800H PIN FUNCTIONS Pin1 Top View PIN PIN NAME I/O 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25~30 31 32~33 RXD TXD D+ D/RST C2CK C2D PIO8 PIO7 PIO6 PIO5 PIO4 PIO3 PIO2 PIO1 PIO0 VRF PIO11 PIO10 PIO9 PIO13 PIO12 PIO15 PIO14 GND ANT GND I O I/O I/O P I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O P I/O I/O I/O I/O I/O I/O I/O P A P 34 VDD P Bottom View FUNCTION DESCRIPTION UART asynchronous input. UART asynchronous transmit.
UM800H APPLICATION CIRCUIT VDD GND RXD Vin *Note1 TXD UART TTL GND D+ D- Vbus USB GND C2CK C2D /RST VDD ISP *Note1 VRF VRF *Note 2 VDD 1 RXD 2 TXD 3 D+ GND 33 GND 32 11 PIO5 ANT 31 12 PIO4 GND 30 UM800H Antenna 50 ohm RF track GND 29 17 VRF GND 25 PIO14 24 VRF PIO15 23 *Note1 GND 26 PIO12 22 GND 27 16 PIO0 PIO9 20 GND 28 15 PIO1 PIO13 21 14 PIO2 PIO10 19 Lp 4 D- 9 PIO7 10 PIO6 PIO11 18 VRF 5 /RST VDD 34 13 PIO3 *Note1 6 C2CK 7 C2D 8 PIO8 LowDropout Reg
UM800H SPECIFICATIONS POWER REQUIREMENTS 3.0V ~ 5.0V regulated for VRF. A linear regulator is recommended. 2.7V ~ 3.6V regulated for VDD.
UM800H Package Drawings and Markings GIGATEK made in Taiwan MODEL NO.:UM800H PART NO.:UM800H-00 FCC ID : WXAUM800H MFG. NO.:REV.X XXXX XXX XXXX Example Board Layout UM800 Copyright 2019 by GIGA-TMS Corporation. HTTP://WWW.GIGATMS.COM.
UM800H Reflow Profile Copyright 2019 by GIGA-TMS Corporation. HTTP://WWW.GIGATMS.COM.