UE600 User Guide TM951326 - 01 April 16, 2015
Copyright© 2015 GIGA-TMS INC. Printed in Taiwan Any part of the contents of this document, without the express written GIGA-TMS permission, shall not in any documents, electronic, mechanical form of remakes or spread. File contents are subject to change without notice.
Has been tested in accordance to essential protection requirements of the R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters and found the test results indeed meet the limitation of the relevant test standard(s) listed below: EMC Radio Spectrum EN 301 489 - 1: V1.9.2 EN 302 208 - 2: V1.4.1 : (2011) 2011 EN 301 489 - 3: V1.6.1 EN 302 208 - 1: V1.4.
Warning Federal Communication Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents Chapter 1:Introduction...........................................................................1 Chapter 2:About UE600 .........................................................................2 Specification ........................................................................................................ 2 LED Indication ..................................................................................................... 3 Chapter 3:How to Use UE600 .......................................
UE600 User Guide Chapter 1:Introduction Introduce The UE600 is a desktop Ultra High Frequency RFID Reader compliant to ISO18000-6C EPC Gen 2 protocol with an operating range of 840 to 960 MHz. And UE600 also easy to use USB HID to connect PC and have auto sensor which can auto read 、write Tag. The software UE600 Tag Issuer is supplied with the reader for Tag reading and writing. Before using the UE600 Reader. We recommend that you should already read this user guide. Fitting UE600 include antenna.
UE600 User Guide Chapter 2:About UE600 Specification USA UE600 Standard RFID spec Frequency Range RF power Interface Power Require UE600-00 Europe UE600-30 ISO 18000-6C, EPC Class1 Gen2 902~928 MHz 865~868 MHz Max 16dBm USB HID Standby : 110mA@5VDC Working : 300mA@5VDC, Min power require : 500mA@ 5VDC Max 20 cm (depending on Tag) RF Reading Range Dimension L: 120mm / W: 86mm / H: 79mm Physical Characteristics Weight 150g ( not Include USB cable ) Environment parameter Temperature Operating : -10°C ~ 6
UE600 User Guide LED Indication Status / Color Power / Red Read / Green Write / Yellow Buzzer / Beep Power ON ON ON ON a beep Standby ON OFF OFF OFF Read Success ON ON OFF a beep Read Fail ON ON OFF 3 beeps Write Success ON OFF ON a beep Write Fail ON OFF ON 3 beeps © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.
UE600 User Guide Chapter 3:How to Use UE600 Before Installing Before Install UE600. Please make sure the following items are ready. A computer (Window XP / Vista / 7 or higher version systems) which already installed UHF Tag Manager. A UE600 reader with USB cable. UHF Tags (ISO18000 Class 1 Gen 2). Start to Use UE600 Connecting UE600 on USB port of your PC. Executing the software UHF Tag Manager to connect UE600. Please refer to UE600 Software User Guide.
UE600 User Guide Chapter 4:Troubleshooting 1. Cannot connect to UE600 with UHF Tag Manager? Please check the Power light of UE600 is lighting. Please check USB cable is connecting well to PC. 2 Cannot read UHF Tags? Please check the software UHF Tag Manager can find out UE600 and connect to it. Please check the tag is a ‘UHF’ tag and is functional. While you put a UHF tag on the top of UE600 and execute read command (or Auto) , the ‘Read’ light shall light up once. © 2015 GIGA-TMS Corporation.
UE600 User Guide Contact us Address: 8F, NO.31, Lane 169, Kang-Ning Street, His-Chih Dist, New Taipei City, Taiwan Tel: 886-2-26954214 Fax: 886-2--26954213 Websites: www.gigatms.com.tw Email: Sales inquiry email - promag@gigatms.com.tw After sales service - support@gigatms.com.tw © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.
TA500 User Guide TM951328 - 01 April 16, 2015
Copyright© 2015 GIGA-TMS INC. Printed in Taiwan Any part of the contents of this document, without the express written GIGA-TMS permission, shall not in any documents, electronic, mechanical form of remakes or spread. File contents are subject to change without notice.
Has been tested in accordance to essential protection requirements of the R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters and found the test results indeed meet the limitation of the relevant test standard(s) listed below: EMC Radio Spectrum EN 301 489 - 1: V1.9.2 EN 302 208 - 2: V1.4.1 : (2011) 2011 EN 301 489 - 3: V1.6.1 EN 302 208 - 1: V1.4.
Warning Federal Communication Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents Chapter 1:Introduction...........................................................................1 Chapter 2:About TA500 .........................................................................2 Specification ........................................................................................................ 2 LED Indication ..................................................................................................... 3 Chapter 3:How to Use TA500 .......................................
TA500 ser Guide Chapter 1:Introduction Introduce The TA500 is a desktop Ultra High Frequency RFID Reader compliant to ISO18000-6C EPC Gen 2 protocol with an operating range of 840 to 960 MHz. As a smart UHF reader, TA500 also supports EPC Encoding and Decoding feature compatible with EPC Tag Data Standard (TDS) of GS1. And TA500 also easy to use USB HID to connect PC and have auto sensor which can auto read Tag. The software TA500 Tag Issuer is supplied with the reader for Tag reading and analysis.
TA500 User Guide Chapter 2:About TA500 Specification USA TA500 Standard RFID spec Frequency Range RF power Interface Power Require TA500-00 Europe TA500-30 ISO 18000-6C, EPC Class1 Gen2 902~928 MHz 865~868 MHz Max 16dBm USB HID Standby : 110mA@5VDC Working : 300mA@5VDC, Min power require : 500mA@ 5VDC Max 20 cm (depending on Tag) RF Reading Range Dimension L: 120mm / W: 86mm / H: 79mm Physical Characteristics Weight 150g ( not Include USB cable ) Environment parameter Temperature Operating : -10°C ~ 60
TA500 User Guide LED Indication Status / Color Power / Red Read / Green Buzzer / Beep Power ON ON ON a beep Standby ON OFF OFF Read Success ON ON a beep Read Fail ON ON 3 beeps © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.
TA500 User Guide Chapter 3:How to Use TA500 Before Installing Before Install TA500. Please make sure the following items are ready. A computer (Window XP / Vista / 7 or higher version systems) which already installed UHF Tag Manager. A TA500 reader with USB cable. UHF Tags (ISO18000 Class 1 Gen 2). Start to Use TA500 Connecting TA500 on USB port of your PC. Executing the software UHF Tag Manager to connect TA500. Please refer to TA500 Software User Guide.
TA500 User Guide Chapter 4:Troubleshooting 1. Cannot connect to TA500 with UHF Tag Manager? Please check the Power light of TA500 is lighting. Please check USB cable is connecting well to PC. 2 Cannot read UHF Tags? Please check the software UHF Tag Manager can find out TA500 and connect to it. Please check the tag is a ‘UHF’ tag and is functional. While you put a UHF tag on the top of TA500 and execute read command (or Auto) , the ‘Read’ light shall light up once. © 2015 GIGA-TMS Corporation.
TA500 User Guide Contact us Address: 8F, NO.31, Lane 169, Kang-Ning Street, His-Chih Dist, New Taipei City, Taiwan Tel: 886-2-26954214 Fax: 886-2--26954213 Websites: www.gigatms.com.tw Email: Sales inquiry email - promag@gigatms.com.tw After sales service - support@gigatms.com.tw © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.