® SmaFinger.
Quick Start to connect the SF650A on the Ethernet 1 Quick Start to connect the SF650A on the Ethernet Step 1 Connect SF650A to Ethernet HUB with (WAS-T0413) cable. Note: You can also connect SF650A to your PC or Laptop directly with same cable. Step 2 Connect Power DC12V with (WAS-T0132) Cable Remark: The WAS-T0132 can be used for Power. Or, you can connect the power to the PIN VCC and GND (blue connector of SF650A). DC12V - + + - DC12V Step 3 Use “SmaFinger.
Quick Start to connect the SF650A on the Ethernet 2 Step 4. Click “Refresh” to refresh the SmaFinger.NET list. Step 5. Click “IP Settings” to change the new device name. Step 6. Edit the SF650A device name for easy recognition. Click "Save" to change the settings. NOTICE: If you need use manual IP, you can click "Manual" and setup the correct IP you used. SmaFinger.
Control Device with Internet Browser 3 Control Device with Internet Browser Step 1 Use “SmaFinger.NET Discoverer” utility to search all available SmaFinger.NET device(s) on the network. Click “Web Admin” to go to the Web Administrator Utility. Step 2 On Login page, to login to the SF650A device. Step 3 Login on the SF650A Default username & password: username: admin password: admin SmaFinger.
Add a new user and fingerprints with Internet 4 Browser Add a new user and fingerprints with Internet Browser Step 1 Login Web Admin Page. Control Device with Internet Browser" Refer to " Step 2 Click “Enroll A User” on the "Tools" menu of SF650A Administrator utility page. Step 3 Click the “Start Enroll” to start the enroll process. Please put the fingerprint on reader twice and the "Status" will show how many fingerprints enroll success.
Setup time zone with Internet Browser 5 Setup time zone with Internet Browser Step 1 Login Web Admin Page. Control Device with Internet Browser" Refer to " Step 2 Click “Time Zone” on the "Settings" menu of SF650A Administrator utility page. Step 3 Choose the time zone for local. Click "Save" to setup the current time zone SmaFinger.
Remote Control the door lock with Internet 6 Browser Remote Control the door lock with Internet Browser Step 1 Login Web Admin Page. Control Device with Internet Browser" Refer to " Step 2 Click “Remote Control” on the "Tools" menu of SF650A Administrator utility page. Step 3 Click the “Toggle” to toggle the relay of SF650A. Note: The SF650A supports the AJAX technology which displays the relay status automatically. SmaFinger.
Configure the SF650A reader functions 7 Configure the SF650A reader functions Step 1 Use “SmaFinger.NET Discoverer” utility to search all available SmaFinger.NET device(s) on the network. Then select the device you want to configure the reader functions and click the “Reader Utility” Step 2 The discoverer utility will execute the “Mifare/DESfire Reader Utility” and display the selected SF650A device. SmaFinger.
Trouble Shooting 8 How to change PC/Laptop network setting to support the Auto IP mode Step 1 Most of the PC/Laptop network default setting is “Obtain an IP address automatically” (auto IP mode). If not, you can follow the steps to change the network setting to auto IP mode. Go to: Control Panel > Network and Internet Connections > Local Area Connection Properties Step 2 General select Internet Protocol (TCP/IP) and click Properties. Step 3 Select the “Obtain an IP address automatically.
9 Trouble Shooting Step 4 Connect the SF650A to PC/Laptop via Ethernet cable then Power On the SF650A. To Laptop How to go back to default settings When password is lost, forgotten or need to reset the device to the auto IP mode. You can press the Reset-Key for 5 seconds, the Reset SF650A will reset automatically and go back to Key default setting. The password is “admin” and IP mode will set to auto IP mode. Some settings will remain the same when reset to default: 1. Device name 2. MAC address 3.
Installation Manual SmaFinger.
11 CAUTION: The crossed out wheeled bin label that can be found on your product indicates that this product should not be disposed of via the normal household waste stream. To prevent possible harm to the environment or human health please separate this product from other waste streams to en-sure that it can be recycled in an environmentally sound manner. For more details on available collection facilities please contact your local government office or the retailer where you purchased this product.
FCC Statement ： THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
