SmaFinger.
1 Quick Start to connect the SF650 on the Ethernet Quick Start to connect the SF650 on the Ethernet Step 1 Connect SF650 to Ethernet HUB with (WAS-T0413) cable. To Hub Note: You can also connect SF650 to your PC or Laptop directly with same cable. Step 2 Connect Power DC12V with DC12V ‐ + (WAS-T0132) Cable +‐ Remark: The WAS-T0132 can be used for OR DC12V Power. Or, you can connect the power to the PIN VCC and GND (blue connector of SF650). Step 3 Use “SmaFinger.
Quick Start to connect the SF650 on the Ethernet 2 Step 4. Click “Refresh” to refresh the SmaFinger.NET list. Step 5. Click “IP Settings” to change the new device name. Step 6. Edit the SF650 device name for easy recognition. Click "Save" to change the settings. NOTICE: If you need use manual IP, you can click "Manual" and setup the correct IP you used. SmaFinger.
Control Device with Internet Browser 3 Control Device with Internet Browser Step 1 Use “SmaFinger.NET Discoverer” utility to search all available SmaFinger.NET device(s) on the network. Click “Web Admin” to go to the Web Administrator Utility. Step 2 On Login page, to login to the SF650 device. Step 3 Login on the SF650 Default username & password: username: admin password: admin SmaFinger.
Add a new user and fingerprints with Internet 4 Add a new user and fingerprints with Internet Browser Step 1 Login Web Admin Page. Refer to " Control Device with Internet Browser" Step 2 Click “Enroll A User” on the "Tools" menu of SF650 Administrator utility page. Step 3 Click the “Start Enroll” to start the enroll process. Please put the fingerprint on reader twice and the "Status" will show how many fingerprints enroll success.
Setup time zone with Internet Browser 5 Setup time zone with Internet Browser Step 1 Login Web Admin Page. Refer to " Control Device with Internet Browser" Step 2 Click “Time Zone” on the "Settings" menu of SF650 Administrator utility page. Step 3 Choose the time zone for local. Click "Save" to setup the current time zone SmaFinger.
Remote Control the door lock with Internet 6 Remote Control the door lock with Internet Browser Step 1 Login Web Admin Page. Refer to " Control Device with Internet Browser" Step 2 Click “Remote Control” on the "Tools" menu of SF650 Administrator utility page. Step 3 Click the “Toggle” to toggle the relay of SF650. Note: The SF650 supports the AJAX technology which displays the relay status automatically. SmaFinger.
Configure the SF650 reader functions 7 Configure the SF650 reader functions Step 1 Use “SmaFinger.NET Discoverer” utility to search all available SmaFinger.NET device(s) on the network. Then select the device you want to configure the reader functions and click the “Reader Utility” Step 2 The discoverer utility will execute the “Mifare/DESfire Reader Utility” and display the selected SF650 device. SmaFinger.
Trouble Shooting 8 How to change PC/Laptop network setting to support the Auto IP mode Step 1 Most of the PC/Laptop network default setting is “Obtain an IP address automatically” (auto IP mode). If not, you can follow the steps to change the network setting to auto IP mode. Go to: Control Panel > Network and Internet Connections > Local Area Connection Properties Step 2 General select Internet Protocol (TCP/IP) and click Properties. Step 3 Select the “Obtain an IP address automatically.
9 Trouble Shooting Step 4 Connect the SF650 to PC/Laptop via Ethernet cable then Power On the SF650. To Laptop How to go back to default settings When password is lost, forgotten or need to reset the device to the auto IP mode. Reset You can press the Reset-Key for 5 seconds, the Key SF650 will reset automatically and go back to default setting. The password is “admin” and IP mode will set to auto IP mode. Some settings will remain the same when reset to default: 1. Device name 2. MAC address 3.
10 Installation Manual Required Items L SHAPE SIX ANGLE SPANNER Buzzer Hole Plate BOTTOM PLATE M3*6L 2PCS PLASTIC PLUG FOR WALL M4*15L 3PCS SCREW BAG BOTTOM PLATE LABEL Secure Mounting Installation Attach the bottom plate label on the target position. 1. Drill the holes to match the bottom plate then fix SmaFinger reader. After fixing SmaFinger with attached screws 2. (using the L-shape spanner) ,apply screw cover plate for completion WALL WALL L-shape screw cover plate SmaFinger.
