User's Manual

1
TM
MP90A
13.56MHz RFID Multi-ISO Protocol Modules
INTRODUCTION
Introducing MP90A, GIGA-TMS’s latest released
RFID Module. It not only equips build-in SAM socket,
but also supports multiple ISO standards.
Other than contactless RFID cards, MP90A also
supports SAM card. Users do not need to understand
the complicated ISO/IEC14443 and ISO7816 standard
to operate MP90A. With simple command through
RS232/USB, users may master multiple RFID standards
easily.
MP90A supports wild ranges of
transmission protocols and transponder ICs available on
the market. Designed to meet the requirements of both
secure personal identity verification and supply chain
management applications,
MP90A is ideal for access control, as well as
Automatic Fare Collection (AFC), ticketing, vending and
mobile solutions
Features
 Enhanced anti-collision algorithm for multi-card
handling
 Full 3DES/AES crypto methods
 USB and RS232 Interface, 19200 N,8,1
 T=CL ISO7816 interface supported
 Built in SAM Socket
 Full access to data of contactless memory, high
security and microcontroller-based cards
FEATURES
 Supported Protocols
ISO14443A, all bit rates : 106 kbps
ISO15693, all modes
Downlink 1 of 4 and 1 of 256
Uplink 6.6/13/26/53 kbps with 1 & 2 sub-
carrier
ISO14443B all bit rates : 106 kbps
 Supported Standard Format
NFC 1~4 TAGs
ISO14443A
ISO14443B
ISO15693
ISO18092 Felica UID ONLY
 Ultra small outline L90 x W30 x H8 mm
 Information Support
Support DLL and library
 Plug-in fitting for 13.56Mhz
 Serial TTL Interface.
 Baud Rate 19200,N,8,1
 Power supply Active 130mA @5VDC
 Firmware Update
Standard Configurations:
 MP90AH----USB HID Interface
※
Specification is subject to change without notice.
 We welcome OEM inquiries
 Custom device programming
is available
新北市汐止區康寧街 169 巷 31 號 8 樓
TEL: [phone]
FAX: [phone]
e-mail: [e-mail]
http://www.gigatms.com.tw