User's Manual

TM
MP30
13.56MHz Multiple Read/Write Module with Antenna
INTRODUCTION
The MP30 is a OEM read/write module with antenna
designed for simple integration. The Serial TTL-interface
can be directly connected to microprocessors and easily
converted to the RS232 serial interface device. The
typical reading range of the module is up to 20~40mm
depending on the antenna and TAG.
The MP30 is a RFID Module for all p
opular 13.56-MHz
RFID/contactless standard protocols. The MP30
supports and compatibles with all major global secured
baseband ISO standards including ISO14443 Type A,
Type B, and Smartlabel ISO15693.
The MP30 is well suited for mobile devi
ces due to its
low power consumption and low operating voltage from
5V. The on-chip 3.3V regulators are provided to
stabilize the chip’s power, and simultaneously supply
the power to the external companion microcontroller up
to 120 mA.
The MP30 suppo
rt the DLL and easy to control this
module, The ActiveX Control can be using any terminal
program (VB .NET , C#…etc)
Standard Configurations:
9
M
P30R----RS232 Interface
9 MP30U----USB Virtual COM Interface
FEATURES
z Supported Protocols
ISO14443A/B, all bit rates : 106 kbps
ISO15693, all modes
Downlink 1 of 4 and 1 of 256
Uplink 6.6/13/26/53 kbps with 1 & 2 sub-
carrier
z
Card Compatibilities
ISO14443A
ISO14443B
ISO15693
ISO14443-3
ISO14443-4
NFC1-4 TAGs
z Ultra small outline 60x30x6.0 mm
z Information Support
Visual C# demonstration Software
Protocol Information
z Low power, low profile for portable
designed
z Plug-in fitting for 13.56Mhz
z Serial TTL Interface.
z Baud Rate 19200,N,8,1
z Power suppl
y Active 120mA @5VDC
z Firmware Up
date
9 We welcome OEM inquiries
9 Custom device programming
is available
新北市汐止區康寧街 169 巷 31 號 8 樓
TEL: [phone]
FAX: [phone]
e-mail: [e-mail]
http://www.gigatms.com.tw
1