GN-BTP01 Wireless Bluetooth USB Printer Adapter User Guide Rev.1.
GN-BTP01 Bluet ooth USB P rinter Adapter This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
GN-BTP01 Bluet ooth USB P rinter Adapter Contents Chapter1 Introduction .............................4 1.1 Package Contents ........................................ 1.3 LED Status ................................................... 1.4 Feature ......................................................... 1.5 Specification ................................................ 1.2 System Requirements .................................. 4 5 5 5 5 Chapter2 Getting Started.........................6 2.
GN-BTP01 Bluet ooth USB P rinter Adapter Chapter1 Introduction The popularity Bluetooth technology has gained over the past couple of years is far greater than the welcome it received when Bluetooth was first discovered in 1994. One of the main factors going against Bluetooth technology was the cost of Bluetooth products. Even today, Bluetooth products cannot be considered that cheap.
GN-BTP01 Bluet ooth USB P rinter Adapter 1.4 Feature n n n n n n n n n Remotely wake up Bluetooth Printer Highly compatible with versatile printers. Support client side Widcom Bluetooth stack software High performance radio transceiver Supporting HCRP & SPP profile Low power standby mode to enable very efficient Power Management Weight: 30g+-5g Dimensions: 80mm x 43mm x 16mm One-year manufacturer warranty 1.
GN-BTP01 Bluet ooth USB P rinter Adapter Chapter2 Getting Started 2.1 Install the Bluetooth USB Printer Adapter Notice: If you have not already installed your printer, please follow the instructions supplied by your printer manufacturer and install your printer first. Step1. Step2. Step3. Power on the Printer. Insert the Blutooth USB Printer Adapter into the USB port of the printer. Plug the end of the power cord firmly into the receptacle on the Bluetooth USB Printer Adapter.
GN-BTP01 Bluet ooth USB P rinter Adapter Step6. The configuration screen of the printer will appear. Select the Bluetooth Port of the printer which you have been installed on the Ports page. And then go to the General page. Step7. Click the “Print Test Page” button on the General page. If the test page can print out successully, the setting is completed. And now, you can use the printer through Bluetooth USB Printer Adapter to print from any application as you normally would.
GN-BTP01 Bluet ooth USB P rinter Adapter Notice: Once you had finished the Bluetooth printer installation setting, you can print any document through the Bluetooth device even the printer does not appear in the “Entire Bluetooth Neighborhood”.
GN-BTP01 Bluet ooth USB P rinter Adapter Limited Warranty 1-Year Warranty Gigabyte warrants to the original consumer/purchaser that the product free from defects in material and workmanship for no limited time from the original manufactory shipment date. This warranty does not cover the product if it is damaged in the process of being installed or improperly used. Gigabyte may replace or repair the product with either new or reconditioned parts.