FOR “GM-08”, “GM-12” & “GM-15T” Models We recommend that you read this user’s manual carefully before using this product.
FEATURES: Supports BT Aux input TWS MP3 Display Screen FM Radio Memory Card slots Microphone Input Remote Control Built-in Rechargeable battery Microphone input Output Power GM-08: 10W GM-12: 30W GM-15T: 40W Impedance: 4 Ohm Separation: 48dB Signal to Noise Ratio: ≥72dB Frequency Response: ≥40Hz-18kHz NOTICE: In order to protect and extend the life of this device, the interval time between switching ON and OFF must be over 30 seconds. Always turn off the power after using.
Bluetooth wireless operation: Turn on the speaker, and press the MODE key to switch to Bluetooth MODE, at the same time the speaker emits its Bluetooth pairing name Domino. Turn on your phone or other Bluetooth receiver, and find Domino in the Bluetooth directory, click it to connect. After connecting successfully, there will be audible indication. Playing songs from the Bluetooth device or other audio can be transmitted to the speaker via Bluetooth.
Functional description of front and read panels
1. 2. 3. 4. Functional description of front and rear panel ON/OFF Power switch LED Light Switch 12V-DC input to connect to an external battery MP3 Function keys: a. MODE: This button selects between BT, Memory Cards or FM Radio b. PREV: This button returns to the previous channel (FM Mode) or Previous music file c. PA/PL: (Pause/Play) This button pauses the songs or music which is playing from Memory Cards. In FM Mode, press this button to scan the channels and press again to stop the scan. d.
Remote Control Functions
IMPORTANT SAFETY INSTRUCTION Do not expose this unit to rain or moist environment to avoid fire hazard or electric shock. CAUTION: Do not open the unit to avoid fire hazard or electric shock. Repairs should be done by professionals only. High Voltage sign. Do not touch. Important instructions for the Operation and Maintenance of the unit. POWER CORD PRECAUTIONS 1. Hold firm the power cord when connecting/disconnecting. 2. Do not place the AC Power cord near any hot surface. 3.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.