StarSign® Key Fob User Manual Giesecke+Devrient Mobile Security GmbH Prinzregentenstrasse 159 81677 Munich Germany https://www.gi-de.
Table of contents Setup and Enrollment.................................................................................................. 3 Usage ......................................................................................................................... 9 Management ............................................................................................................. 10 Safety Instructions ...................................................................................................
Setup and Enrollment 1. Unpack the StarSign Key Fob from your presentation box. The box contains the following: • • • StarSign Key Fob device USB type C cable Quick guide 2. Please familiarize yourself with the StarSign Key Fob LED light indications.
3. Charge the StarSign Key Fob using the USB cable provided (or any other USB type C cable) until the battery LED emits a constant blue light. Please re-charge the StarSign key fob if the battery LED blinks blue fast. 4. Download and install the Enrolment Application from the App Store using your mobile device by scanning the QR code printed on the side of the packaging box. 5. Switch on the StarSign Key Fob by firmly pressing the button on the side for 3 seconds. The LED will blink yellow. 6.
7. Identify and select the correct StarSign Key Fob that you wish to enroll from the list of available StarSign Key Fobs. The StarSign Key Fob can be identified by matching the device ID printed on its reverse side with the corresponding device ID in the list. 8. Enter the pairing code printed on the reverse side of the StarSign Key Fob in the connection menu. The check marks in the dialog can be ignored.
9. Once the StarSign Key Fob is connected the following screen will appear with more information about the StarSign Key Fob including any fingerprints that are already enrolled for the StarSign Key Fob. Press the blue button with the ‘+’ symbol to enroll a new fingerprint. 10. Before the fingerprint can be enrolled an Access Code needs to be entered. The default Access Code is 00000000. Please change the Access Code to an individual Access Code after the setup in the settings menu.
11. After the Access Code has been entered, the enrolment of the fingerprint can be performed. The enrolment process is a step-by-step guide to the fingerprint capturing process. 12. Once the fingerprint template is enrolled, you are notified that the fingerprint was successfully enrolled.
13. The newly enrolled fingerprint is captured in the list of enrolled fingerprints for the device. The StarSign Key Fob can now be used for FIDO registrations and any other transaction. Authorization is provided by using the enrolled fingerprint verification. The device will allow a maximum of 20 fingerprints to be enrolled.
Usage 1. The device can be used via USB, BLE and NFC. For USB, just connect the device via USB cable to a host system (e.g. Windows PC). For NFC, press the power button briefly, for BLE, keep the button pressed for at least 3 seconds. 2. Before an NFC transaction can be performed, the device should blink green (ready for fingerprint match). Place an enrolled finger on the sensor and hold it there until the device shows a constant green light – this means it has successfully matched your fingerprint.
Management 1. The firmware can be updated via the Companion App in the settings menu. 2. Registered FIDO keys that are stored on the StarSign Key Fob can be displayed in the settings menu. The settings menu allows you to also perform a factory reset. After the factory reset, the device reverts to the status as delivered from the manufacturer and all stored data (e.g. fingerprint templates, FIDO keys) are deleted.
Safety Instructions Don’t put the device on a fire. Don’t open the device. The Li-Ion battery is removable but should be kept in the device. Avoid contact with moisture. Avoid cold temperatures. Don’t leave the device on heated locations. Avoid sources of heat.
Troubleshooting Problem Fingerprint is not recognized Cause Finger structure is damaged and cannot be read. The sensor surface is dirty or wet. What to do? Please make sure that the sensor surface is clean and dry. Try all of your enrolled fingerprints and position the finger ideally in the upright direction of the StarSign Key Fob. Press the fingertip firmly on the sensor until the LED lights up in green or red. In case of red, reposition the finger.
Disposal The device corresponds to Directive 2012/19/EU on Waste Electrical and Electronic Equipment and must not be disposed of with general household garbage. The symbol of a crossed out garbage can indicates this. Please dispose of this product via the return and collection systems in your region. You can also return waste electrical and electronic equipment free of charge to the retailer if its sales, storage and shipping area for electric and electronic equipment measures over 400 square meters.
Product Description Preinstalled applications: FIDO U2F, FIDO2 Android and iOS companion apps: Fingerprint enrolment and deletion on StarSign key fob Status LEDs: Connection status, battery status, verification status Fingerprint sensor: User confirmation for transaction Communication: USB, Bluetooth® 5, NFC (ISO 14443) Power supply: 165 mAh Li-Ion battery, charging through USB type C Battery duration: ~1 month if the device is in normal use Size: 43x43x14.
—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Articles included in the product contain substances meeting the criteria set out in Article 57 REACH and which have been identified in accordance with Article 59(1) REACH in a concentration above 0.
Giesecke+Devrient Mobile Security GmbH More insights © Giesecke+Devrient Mobile Security GmbH, 2021 Subject to change without notice.
StarSign® Key Fob Benutzerhandbuch Giesecke+Devrient Mobile Security GmbH Prinzregentenstraße 159 81677 München Deutschland https://www.gi-de.
Inhaltsverzeichnis Einrichtung und Registrierung ................................................................................... 19 Verwendung .............................................................................................................. 25 Verwaltung ................................................................................................................ 27 Sicherheitsanweisungen ...........................................................................................
Einrichtung und Registrierung 1. Entnehmen Sie den StarSign Key Fob aus der Präsentationsbox. Die Box umfasst folgenden Inhalt: • • • 2. StarSign Key Fob USB-Kabel (Typ C) Kurzanleitung Machen Sie sich bitte mit den LED-Leuchtanzeigen des StarSign Key Fob vertraut.
3. Laden Sie den StarSign Key Fob über das mitgelieferte USB-Kabel (oder ein anderes USB-Kabel des Typs C) auf, bis die Batterieanzeige durchgehend blau leuchtet. Laden Sie den StarSign Key Fob erneut auf, sobald die blaue LED der Batterieanzeige schnell blinkt. 4. Laden Sie die Enrolment App aus dem App Store herunter und installieren Sie sie. Nutzen Sie hierfür Ihr Smartphone und scannen Sie den QR-Code, der seitlich auf die Verpackung gedruckt ist. 5.
7. Suchen Sie in der Liste der verfügbaren StarSign Key Fobs das Gerät, das Sie registrieren möchten, und wählen Sie es aus. Sie finden den richtigen StarSign Key Fob durch Abgleich der Gerätekennung, die sich auf der Rückseite des Geräts befindet, mit den aufgelisteten Gerätekennungen. 8. Geben Sie im Verbindungsmenü den Pairing-Code ein, der auf die Rückseite des StarSign Key Fob aufgedruckt ist. Die Häkchen im Dialogfenster brauchen Sie nicht zu beachten.
9. Sobald eine Verbindung zum StarSign Key Fob aufgebaut wurde, erscheint folgender Bildschirm mit weiteren Informationen zum StarSign Key Fob, darunter eventuell bereits für dieses Gerät registrierte Fingerabdrücke. Drücken Sie die blaue Taste mit dem „+“-Symbol, um einen neuen Fingerabdruck zu registrieren. 10. Für die Registrierung des Fingerabdrucks muss zunächst ein Zugangscode eingegeben werden. Der Standard-Zugangscode lautet: 00000000.
11. Nach Eingabe des Zugangscodes kann die Registrierung des Fingerabdrucks erfolgen. Im Rahmen des Registrierungsvorgangs werden Sie Schritt für Schritt durch den Prozess der Fingerabdruckerfassung geführt. 12. Sobald das Fingerabdruckmuster registriert wurde, werden Sie über die erfolgreiche Registrierung des Fingerabdrucks informiert.
13. Der neu registrierte Fingerabdruck wird in die Liste der für das Gerät registrierten Fingerabdrücke aufgenommen. Der StarSign Key Fob kann nun für FIDOAnmeldungen und andere Transaktionen genutzt werden. Die Autorisierung erfolgt per Prüfung des registrierten Fingerabdrucks. Für ein Gerät können bis zu 20 Fingerabdrücke registriert werden.
Verwendung 1. Das Gerät kann über USB, Bluetooth Low Energy (BLE) und NFC verwendet werden. Verbinden Sie das Gerät für die Verwendung über USB einfach per USB-Kabel mit einem Host-System (z. B. Windows PC). Drücken Sie zur Verwendung des Geräts über NFC kurz die Ein-/Aus-Taste; halten Sie die Taste für die Verwendung über BLE mindestens drei Sekunden lang gedrückt. 2. Vor der Durchführung einer Transaktion über NFC muss das Gerät grün blinken (bereit für den Abgleich des Fingerabdrucks).
4. Wenn der StarSign Key Fob an ein USB-Kabel angeschlossen ist, aktiviert das Gerät außerdem automatisch BLE und kann in diesem Modus für Transaktionen über USB oder BLE verwendet werden. Schlägt der Abgleich des Fingerabdruckes vier Mal fehl, wird der StarSign Key Fob gesperrt und muss durch Aus- und Wiedereinschalten über die Ein-/Aus-Taste neugestartet werden.
Verwaltung 1. Die Firmware kann über die Companion App im Einstellungsmenü aktualisiert werden. 2. Registrierte FIDO-Schlüssel, die auf dem StarSign Key Fob hinterlegt sind, können im Einstellungsmenü eingesehen werden. Im Einstellungsmenü können Sie außerdem eine Zurücksetzung auf Werkseinstellungen vornehmen. Daraufhin wird das Gerät auf die Werkseinstellungen zurückgesetzt, und alle gespeicherten Daten (z. B. Fingerabdruckmuster und FIDO-Schlüssel) werden gelöscht.
Sicherheitsanweisungen Das Gerät nicht ins Feuer werfen. Das Gerät nicht öffnen. Die Lithium-Ionen-Batterie ist herausnehmbar, sollte jedoch im Gerät verbleiben. Kontakt mit Feuchtigkeit vermeiden. Kalte Temperaturen vermeiden. Das Gerät nicht auf erwärmte Stellen legen. Wärmequellen vermeiden.
Fehlerbehebung Problem Der Fingerabdruck wird nicht erkannt. Ursache Der Fingerabdruck ist beschädigt und kann nicht gelesen werden. Der Finger ist nicht korrekt auf dem Sensor platziert. Die Oberfläche des Sensors ist verunreinigt oder nass. Vorgehen Stellen Sie sicher, dass die Oberfläche des Sensors sauber und trocken ist. Versuchen Sie alle registrierten Fingerabdrücke, und legen Sie den Finger möglichst senkrecht auf den StarSign Key Fob.
Wenn Sie den StarSign Key Fob oder die BLE-Verbindung über ein Smartphone zurücksetzen, kann keine Verbindung zu anderen gekoppelten Smartphones mehr aufgebaut werden. Es kann keine Verbindung zu anderen gekoppelten Smartphones mehr aufgebaut werden, weil diese über alte Koppelungsinformationen verfügen, die auf dem StarSign Key Fob gelöscht wurden. Löschen Sie die BLEVerbindung mit dem StarSign Key Fob auf allen anderen Smartphones und führen Sie eine neue Kopplung durch.
Entsorgung Das Gerät entspricht der Richtlinie 2012/19/EU über Elektro- und ElektronikAltgeräte und darf nicht dem allgemeinen Haushaltsmüll zugeführt werden. Das Symbol der durchgestrichenen Mülltonne weist hierauf hin. Bitte entsorgen Sie das Produkt über die Rückgabe- und Sammelsysteme in Ihrer Region.
Produktbeschreibung Vorinstallierte Anwendungen: FIDO U2F, FIDO2 Android und iOS Companion Apps: Registrierung und Löschung des Fingerbadrucks auf dem StarSign Key Fob Status-LEDs: Verbindungsstatus, Batteriestand, Verifizierungsstatus Fingerabdrucksensor: Bestätigung von Transaktionen durch den Benutzer Kommunikation: USB, Bluetooth® 5, NFC (ISO 14443) Stromversorgung: 165 mAh Lithium-Ionen-Batterie, Aufladung mittels USB-Kabel (Typ C) Laufzeit der Batterie: Ca.
Soweit uns bekannt ist, deutet nichts darauf hin, dass das Vorhandensein der vorgenannten Stoffe weitere RisikomanagementMaßnahmen zur sicheren Verwendung der Erzeugnisse erfordern würde.
Giesecke+Devrient Mobile Security GmbH Mehr insights © Giesecke+Devrient Mobile Security GmbH, 2021 Änderungen vorbehalten.
StarSign® Key Fob Manual de Usario Giesecke+Devrient Mobile Security GmbH Prinzregentenstrasse 159 81677 Múnich Alemania https://www.gi-de.
Índice Configuración e inscripción ....................................................................................... 37 Uso ........................................................................................................................ 43 Gestión ..................................................................................................................... 44 Instrucciones de seguridad .......................................................................................
Configuración e inscripción 1. Desembale el dispositivo StarSign Key Fob de la caja de presentación. La caja contiene los siguientes elementos: • • • 2. Dispositivo StarSign Key Fob Cable USB de tipo C Guía rápida Familiarícese con los indicadores luminosos LED del dispositivo StarSign Key Fob.
3. Cargue el dispositivo StarSign Key Fob con el cable USB proporcionado (o con cualquier otro cable USB de tipo C) hasta que el LED de la batería se ilumine con una luz azul fija. Vuelva a cargar el dispositivo StarSign Key Fob si el LED de la batería parpadea de forma rápida en color azul. 4. Descargue e instale la aplicación Enrolment del App Store con su dispositivo móvil escaneando el código QR impreso en el lateral de la caja de embalaje. 5.
7. Identifique y seleccione el dispositivo StarSign Key Fob correcto que desea inscribir en la lista de dispositivos StarSign Key Fob disponibles. El dispositivo StarSign Key Fob puede identificarse haciendo coincidir el ID del dispositivo impreso en su lado posterior con el ID del dispositivo correspondiente en la lista. 8. Introduzca el código de emparejamiento impreso en la parte posterior del dispositivo StarSign Key Fob en el menú de conexión.
9. Una vez conectado el dispositivo StarSign Key Fob, aparecerá la siguiente pantalla con más información sobre el dispositivo StarSign Key Fob, incluida cualquier huella dactilar ya inscrita para el dispositivo StarSign Key Fob. Pulse el botón azul con el símbolo «+» para inscribir una nueva huella dactilar. 10. Para inscribir la huella dactilar, es necesario introducir un código de acceso. El código de acceso predeterminado es 00000000.
11. Tras haber introducido el código de acceso, se completará la inscripción de la huella dactilar. El proceso de inscripción es una guía paso a paso del proceso de captura de huellas dactilares. 12. Una vez inscrita la plantilla de huellas dactilares, se le informará de que la huella dactilar se ha inscrito correctamente.
13. Las huellas dactilares recién inscritas se capturan en la lista de huellas dactilares inscritas para el dispositivo. El dispositivo StarSign Key Fob puede utilizarse ahora para registros FIDO y otras transacciones. La autorización se proporciona utilizando la verificación de huellas inscritas. El dispositivo permite la inscripción de un máximo de 20 huellas dactilares.
Uso 1. El dispositivo puede utilizarse a través de USB, BLE y NFC. Para USB, conecte simplemente el dispositivo a través del cable USB a un sistema host (p. ej., un PC con Windows). Para NFC, pulse el botón de encendido brevemente y, para BLE, mantenga pulsado el botón durante al menos 3 segundos. 2. Para que la transacción NFC pueda completarse, el dispositivo debe parpadear en color verde (listo para la identificación de huellas dactilares).
Gestión 1. El firmware puede actualizarse a través de la aplicación Companion en el menú de ajustes. 2. Las claves FIDO registradas que se almacenan en el dispositivo StarSign Key Fob pueden mostrarse en el menú de ajustes. El menú de ajustes también le permite realizar un restablecimiento de fábrica. Tras el restablecimiento de fábrica, el dispositivo vuelve al estado en el que fue entregado por el fabricante y se eliminan todos los datos almacenados (p. ej.
Instrucciones de seguridad No coloque el dispositivo sobre fuego. No abra el dispositivo. La batería de iones de litio es extraíble, pero no debe extraerse del dispositivo. Evite el contacto con humedad. Evite temperaturas frías. No deje el dispositivo en espacios calentados. Evite las fuentes de calor.
Resolución de problemas Problema La huella dactilar no se reconoce. Causa La estructura para los dedos está dañada y no puede leerse. El dedo no está correctamente colocado sobre el sensor. La superficie del sensor está sucia o húmeda. ¿Qué hacer? Asegúrese de que la superficie del sensor esté limpia y seca. Pruebe todas las huellas dactilares inscritas y coloque el dedo idealmente en la dirección vertical del dispositivo StarSign Key Fob.
Si se restablece el dispositivo StarSign Key Fob o el emparejamiento BLE a través de un smartphone, otros smartphones emparejados no podrán conectarse. Otros smartphones emparejados ya no podrán conectarse porque mantienen la información de emparejamiento que se eliminó del dispositivo StarSign Key Fob. Elimine el emparejamiento BLE con el dispositivo StarSign Key Fob en el resto de smartphones y restablezca el emparejamiento. El dispositivo no se carga con el cable USB.
Eliminación El aparato cumple con la Directiva 2012/19/UE sobre residuos de aparatos eléctricos y electrónicos (RAEE) y no debe desecharse con la basura doméstica general. El símbolo del cubo de basura tachado lo indica. Le rogamos que elimine el producto a través de los sistemas de devolución y recogida de su región.
Descripción del producto Aplicaciones preinstaladas: FIDO U2F, FIDO2 Aplicaciones Companion de Android e iOS: inscripción y eliminación de huellas dactilares en el dispositivo StarSign Key Fob LED de estado: estado de conexión, estado de la batería y estado de verificación Sensor de huellas dactilares: confirmación del usuario para la transacción Comunicación: USB, Bluetooth® 5, NFC (ISO 14443) Alimentación de corriente: batería de iones de litio de 165 mAh, carga a través de USB de tipo C Duración de la ba
No tenemos conocimiento de nada que indique que la presencia de la sustancia mencionada anteriormente requiera medidas adicionales de gestión del riesgo para permitir un uso seguro de los artículos.
Giesecke+Devrient Mobile Security GmbH Más información © 2021 Giesecke+Devrient Mobile Security GmbH Sujeto a cambios sin previo aviso.
StarSign® Key Fob Manuel de l‘Utilisateur Giesecke+Devrient Mobile Security GmbH Prinzregentenstrasse 159 81677 Munich Allemagne https://www.gi-de.
Table des matières Configuration et enregistrement ................................................................................ 54 Utilisation .................................................................................................................. 60 Gestion ..................................................................................................................... 61 Consignes de sécurité...............................................................................................
Configuration et enregistrement 1. Retirez le StarSign Key Fob de votre coffret de présentation. Le coffret contient les éléments suivants : • • • 2. Appareil StarSign Key Fob Câble USB de type C Guide de prise en main Veuillez vous familiariser avec les indications lumineuses des diodes témoins du StarSign Key Fob.
3. Chargez le StarSign Key Fob à l’aide du câble USB fourni (ou de tout autre câble USB de type C) jusqu’à ce que la diode témoin de la batterie reste allumée en bleu. Si la diode témoin de la batterie clignote rapidement en bleu, rechargez le StarSign Key Fob. 4. Téléchargez et installez l’application d’enregistrement à partir de l’App Store à l’aide de votre appareil mobile en scannant le code QR imprimé sur le côté de l’emballage. 5.
7. Dans la liste des StarSign Key Fobs disponibles, identifiez et sélectionnez le StarSign Key Fob correct que vous souhaitez enregistrer. Vous pouvez identifier le StarSign Key Fob en comparant l’ID présent sur l’arrière de cet appareil avec l’ID correspondant dans la liste. 8. Dans le menu de connexion, saisissez le code de liaison situé à l’arrière du StarSign Key Fob. Vous pouvez ignorer les coches dans la boîte de dialogue.
9. Une fois le StarSign Key Fob connecté, l’écran suivant affiche davantage d’informations sur cet appareil, notamment toute empreinte digitale déjà enregistrée pour le StarSign Key Fob. Pour enregistrer une nouvelle empreinte digitale, appuyez sur le bouton bleu comportant le symbole « + ». 10. Pour pouvoir enregistrer l’empreinte digitale, vous devez tout d’abord saisir un code d’accès. Le code d’accès par défaut est 00000000.
11. Une fois le code d’accès saisi, vous pouvez enregistrer l’empreinte digitale. Cette procédure est un guide étape par étape de la capture de l’empreinte digitale. 12. Une fois le modèle d’empreinte digitale enregistré, l’appareil vous signale que l’empreinte digitale a été enregistrée correctement.
13. L’empreinte digitale qui vient d’être enregistrée est ajoutée à la liste des empreintes digitales enregistrées pour le StarSign Key Fob. Vous pouvez alors utiliser celui-ci pour des inscriptions FIDO et toute autre transaction. L’autorisation est accordée en vérifiant l’empreinte digitale enregistrée. L’appareil permet d’enregistrer jusqu’à 20 empreintes digitales. Toutes les empreintes digitales enregistrées sont répertoriées dans l’application associée de votre appareil mobile.
Utilisation 1. L’appareil peut être utilisé via USB, BLE et NFC. Pour USB, il suffit de connecter l’appareil, au moyen de son câble USB, à un système hôte (par exemple un PC Windows). Pour NFC, appuyez brièvement sur le bouton marche/arrêt ; pour BLE, maintenez ce bouton enfoncé pendant au moins 3 secondes. 2. Avant de pouvoir effectuer une transaction NFC, l’appareil doit clignoter en vert (indiquant qu’il est prêt à reconnaître une empreinte digitale).
Gestion 1. Vous pouvez mettre à jour le firmware dans le menu des réglages de l’application associée. 2. Le menu des réglages vous permet d’afficher les clés FIDO enregistrées dans le StarSign Key Fob. Le menu des réglages vous permet également de rétablir les réglages d’usine. L’appareil retourne alors à l’état dans lequel il a été livré par le fabricant, et toutes les données enregistrées (par exemple modèles d’empreintes digitales, clés FIDO) sont supprimées.
Consignes de sécurité Ne placez pas l’appareil sur une flamme. N’ouvrez pas l’appareil. La batterie lithium-ion peut être retirée, mais elle doit être conservée dans l’appareil. Évitez tout contact avec de l’humidité. Évitez les basses températures. Ne laissez pas l’appareil sur des emplacements chauffés. Évitez les sources de chaleur.
Dépannage Problème L’empreinte digitale n’est pas reconnue. Cause La structure digitale est endommagée et ne peut pas être lue. Le doigt n’est pas placé correctement sur le capteur. La surface du capteur est sale ou humide. Que faire ? Vérifiez que la surface du capteur est propre et sèche. Essayez toutes vos empreintes digitales enregistrées et, dans l’idéal, placez le doigt dans le sens vertical sur le StarSign Key Fob.
L’appareil ne se charge pas avec le câble USB. L’appareil est en mode NFC (vous avez appuyé trop brièvement sur le bouton). StarSign Key Fob User Manual, Public Arrêtez l’appareil, puis branchez-le avec le câble USB. L’appareil démarre alors automatiquement et se charge.
Destruction L’appareil est conforme à la directive 2012/19/UE relative aux déchets d’équipements électriques et électroniques et ne doit pas être jeté avec les déchets ménagers généraux. C’est ce qu’indique le symbole représentant une poubelle barrée. Veuillez éliminer le produit par le biais des systèmes de retour et de collecte de votre région.
Description du produit Applications préinstallées : FIDO U2F, FIDO2 Applications associées Android et iOS : enregistrement et suppression d’empreintes digitales sur le StarSign Key Fob Diodes témoins d’état : état de la connexion, de la batterie, de la vérification Capteur d’empreintes digitales : confirmation de l’utilisateur pour la transaction Communication : USB, Bluetooth® 5, NFC (ISO 14443) Alimentation en courant électrique : batterie lithium-ion 165 mAh, rechargeable via USB type C Autonomie de la b
Certains composés inclus dans le produit contiennent des substances répondant aux critères définis dans l’article 57 du règlement sur l’enregistrement, l’évaluation, l’autorisation et la restriction des substances chimiques (REACH) et qui ont été identifiées, conformément à l’article 59, paragraphe 1, du règlement REACH, comme ayant une concentration supérieure à 0,1 % (p/p) : • Broche Pogo contenant du plomb (EC 231-100-4, CAS 7439-92-1) • Batterie contenant du 1,3-propanesultone (EC 214-317-9, CAS 1120-71
Giesecke+Devrient Mobile Security GmbH Plus d’informations © 2021 Giesecke+Devrient Mobile Security GmbH Modifications possibles sans préavis.
StarSign® Key Fob Manuale d‘uso Giesecke+Devrient Mobile Security GmbH Prinzregentenstrasse 159 81677 Monaco Germania https://www.gi-de.
Indice Configurazione e registrazione .................................................................................. 71 Utilizzo ...................................................................................................................... 77 Gestione ................................................................................................................... 78 Istruzioni per la sicurezza ..........................................................................................
Configurazione e registrazione 1. Estrarre la chiave elettronica StarSign dalla scatola di presentazione. Contenuto della scatola: • • • 2. Chiave elettronica StarSign Cavo USB di tipo C Guida rapida Prendere confidenza con le indicazioni luminose del LED della chiave elettronica StarSign.
3. Caricare la chiave elettronica StarSign utilizzando il cavo USB in dotazione (o un qualsiasi altro cavo USB di tipo C) finché il LED della batteria non emetta una luce blu fissa. Ricaricare la chiave elettronica StarSign se il LED della batteria lampeggia velocemente in blu. 4. Scaricare e installare l'applicazione di registrazione (Enrolment Application) dall'App Store utilizzando il proprio dispositivo mobile per scansionare il codice QR stampato sul lato della scatola di presentazione. 5.
7. Identificare e selezionare la corretta chiave elettronica StarSign che si desidera registrare dall'elenco delle chiavi elettroniche StarSign disponibili. La chiave elettronica StarSign può essere identificata abbinando l'ID del dispositivo stampato sul retro con l'ID del dispositivo corrispondente nell'elenco. 8. Inserire il codice di accoppiamento stampato sul retro della chiave elettronica StarSign nel menu di connessione. I segni di spunta nella finestra di dialogo possono essere ignorati.
9. Una volta connessa la chiave elettronica StarSign, viene visualizzata la seguente schermata con ulteriori informazioni sulla chiave elettronica StarSign, comprese eventuali impronte digitali già registrate per la chiave elettronica StarSign. Premere il pulsante blu con il simbolo "+" per registrare una nuova impronta digitale. 10. È necessario inserire un codice di accesso prima di poter registrare l'impronta digitale. Il codice di accesso predefinito è 00000000.
11. Dopo aver inserito il codice di accesso, è possibile eseguire la registrazione dell'impronta digitale. Il processo di registrazione è una guida passo-passo al processo di acquisizione dell'impronta digitale. 12. Una volta registrata la traccia dell'impronta digitale, si riceve la notifica che l'impronta digitale è stata registrata correttamente.
13. L'impronta digitale appena registrata viene acquisita nell'elenco delle impronte digitali registrate per il dispositivo. La chiave elettronica StarSign può ora essere utilizzata per le registrazioni FIDO e qualsiasi altra transazione. L'autorizzazione viene fornita per mezzo della verifica dell'impronta digitale registrata. Il dispositivo consente la registrazione di massimo 20 impronte digitali.
Utilizzo 1. Il dispositivo può essere utilizzato tramite USB, BLE e NFC. Per USB, basta collegare il dispositivo con un cavo USB a un sistema host (ad esempio, un PC Windows). Per NFC, premere brevemente il pulsante di accensione; per BLE, tenere premuto il pulsante per almeno 3 secondi. 2. Prima di poter eseguire una transazione NFC, il dispositivo dovrebbe lampeggiare in verde (pronto per la corrispondenza dell'impronta digitale).
Gestione 1. Il firmware può essere aggiornato tramite l'app Companion nel menu delle impostazioni. 2. Le chiavi FIDO registrate che sono memorizzate nella chiave elettronica StarSign possono essere visualizzate nel menu delle impostazioni. Il menu delle impostazioni consente anche di ripristinare le impostazioni di fabbrica.
Istruzioni per la sicurezza Non gettare il dispositivo nel fuoco. Non aprire il dispositivo. La batteria agli ioni di litio è rimovibile ma deve essere tenuta nel dispositivo. Evitare il contatto con l'umidità. Evitare le basse temperature. Non lasciare il dispositivo in luoghi riscaldati. Evitare le fonti di calore.
Risoluzione dei problemi Problema L'impronta digitale non viene riconosciuta. Causa La struttura del dito è danneggiata e non può essere letta. La superficie del sensore è sporca o bagnata. Azione Verificare che la superficie del sensore sia pulita e asciutta. Provare tutte le tue impronte digitali registrate e posizionare il dito idealmente nella direzione verticale della chiave elettronica StarSign. Premere con decisione la punta del dito sul sensore finché il LED non si accenda in verde o in rosso.
Il dispositivo non si carica con il cavo USB. Il dispositivo è in modalità NFC (il pulsante è stato appena premuto brevemente). StarSign Key Fob User Manual, Public Spegnere il dispositivo e quindi collegare il dispositivo con il cavo USB. Il dispositivo si accende automaticamente dopo il collegamento e viene caricato.
Smaltimento Il dispositivo è conforme alla direttiva 2012/19/UE sui rifiuti di apparecchiature elettriche ed elettroniche e non deve essere smaltito tra i rifiuti domestici. Lo indica il simbolo del cassonetto barrato. Smaltire il prodotto presso i centri comunali di raccolta differenziata della propria regione.
Descrizione del prodotto Applicazioni preinstallate: FIDO U2F, FIDO2 App Companion Android e iOS: Registrazione e cancellazione di impronte digitali sulla chiave elettronica StarSign LED di stato: Stato della connessione, stato della batteria, stato della verifica Sensore di impronte digitali: Conferma dell'utente per la transazione Comunicazione: USB, Bluetooth® 5, NFC (ISO 14443) Alimentazione: Batteria agli ioni di litio da 165 mAh, ricarica tramite cavo USB di tipo C Durata della batteria: ~1 mese se il
Non siamo a conoscenza di alcun dettaglio che indichi che la presenza delle sostanze summenzionate richieda misure aggiuntive di gestione del rischio per garantire un uso sicuro degli articoli.
Giesecke+Devrient Mobile Security GmbH Ulteriori informazioni © 2021 Giesecke+Devrient Mobile Security GmbH Soggetto a modifiche senza preavviso.
StarSign® Key Fob Manual do Usuário Giesecke+Devrient Mobile Security GmbH Prinzregentenstrasse 159 81677 Munique Alemanha https://www.gi-de.
Índice Configuração e registro ............................................................................................. 88 Utilização .................................................................................................................. 94 Gerenciamento ......................................................................................................... 95 Instruções de segurança ...........................................................................................
Configuração e registro 1. Retire o StarSign Key Fob da sua caixa de apresentação. A caixa contém o seguinte: • • • 2. Token StarSign Key Fob Cabo USB tipo C Guia rápido Familiarize-se com os indicadores luminosos LED do StarSign Key Fob.
3. Carregue o StarSign Key Fob usando o cabo USB fornecido (ou qualquer outro cabo USB tipo C) até o LED da bateria acender com uma luz azul constante. Se o LED da bateria estiver piscando rapidamente em azul, recarregue o StarSign Key Fob. 4. Baixe e instale o Enrolment App na App Store, escaneando o código QR impresso na lateral da caixa da embalagem usando o seu dispositivo móvel. 5. Ligue o StarSign Key Fob mantendo pressionado o botão lateral durante 3 segundos. O LED piscará em amarelo. 6.
7. Identifique e selecione o StarSign Key Fob que deseja registrar a partir da lista de StarSign Key Fobs disponíveis. O StarSign Key Fob pode ser identificado verificando o ID do dispositivo, que se encontra impresso na parte de trás, e encontrando o ID correspondente na lista. 8. Digite o código de emparelhamento, impresso na parte de trás do StarSign Key Fob, no menu de conexão. As marcas de seleção na caixa de diálogo podem ser ignoradas.
9. Assim que o StarSign Key Fob estiver conectado, a tela a seguir será exibida com mais informações sobre ele, inclusive quaisquer impressões digitais que já estejam registradas para o StarSign Key Fob. Pressione o botão azul com o símbolo "+" para registrar uma nova impressão digital. 10. É necessário digitar um código de acesso antes de registrar a impressão digital. O código de acesso padrão é 00000000.
11. Após digitar o código de acesso, a impressão digital pode ser registrada. O processo de registro é um guia de passo a passo para o reconhecimento da impressão digital. 12. Assim que o modelo de impressão digital tiver sido registrado, você receberá uma notificação.
13. A nova impressão digital registrada será incluída na lista de impressões digitais registradas para o token. Agora é possível usar o StarSign Key Fob para registros de autenticação FIDO e qualquer outra transação. A autorização ocorre através da verificação da impressão digital registrada. O token permite registrar um máximo de 20 impressões digitais.
Utilização 1. O token pode ser usado via USB, BLE e NFC. Para USB, basta conectar o token através de um cabo USB a um sistema host (por ex., PC Windows). Para NFC, pressione brevemente o botão de ligar; para BLE, mantenha o botão pressionado durante, pelo menos, 3 segundos. 2. Antes de realizar uma transação NFC, o token deve piscar em verde (pronto para correspondência de impressão digital).
Gerenciamento 1. O firmware pode ser atualizado através do Companion App, no menu de configurações. 2. Chaves FIDO registradas, armazenadas no StarSign Key Fob, podem ser exibidas no menu de configurações. O menu de configurações também permite executar uma redefinição de fábrica. Após a redefinição de fábrica, o token volta para o estado em que foi fornecido pelo fabricante e todos os dados armazenados (por ex., modelos de impressão digital, chaves FIDO) são excluídos.
Instruções de segurança Não expor o token ao fogo Não abrir o token. A bateria de íons de lítio é removível, mas deve ser mantida no token. Evite o contato com a umidade. Evite temperaturas baixas. Não deixar o token em locais aquecidos. Evitar fontes de calor.
Resolução de problemas Problema Impressão digital não reconhecida Causa A estrutura do dedo apresenta falhas e não pode ser lida. A superfície do sensor está suja ou úmida. O que fazer? Certifique-se de que a superfície do sensor está limpa e seca. Experimente com todas as impressões digitais registradas e posicione o dedo de maneira ideal na direção vertical do StarSign Key Fob. Pressione a ponta do dedo com firmeza no sensor até o LED acender em verde ou vermelho. Caso vermelho, reposicione o dedo.
O token não carrega com o cabo USB. O token se encontra em modo NFC (o botão só foi brevemente pressionado) StarSign Key Fob User Manual, Public Desligue o token e conecteo usando o cabo USB. O token é ligado automaticamente após ser conectado e é carregado.
Descarte O dispositivo está em conformidade com a Diretiva 2012/19/UE relativa aos resíduos de equipamentos elétricos e eletrônicos e não pode ser descartado no lixo doméstico. O símbolo de lixeira riscada serve para indicar isso. Descarte o produto através do sistema de devolução e descarte na sua região.
Descrição do produto Aplicativos pré-instalados: FIDO U2F, FIDO2 Companion Apps para Android e iOS: registro e exclusão de impressão digital no StarSign Key Fob LEDs de status: status da conexão, status da bateria, status de verificação Sensor de impressão digital: confirmação de usuário para transação Comunicação: USB, Bluetooth® 5, NFC (ISO 14443) Fonte de alimentação: bateria de íons de lítio de 165 mAh, carregamento via USB tipo C Duração da bateria: ~1 mês em caso de uso normal do dispositivo Tamanho:
Giesecke+Devrient Mobile Security GmbH Mais insights © 2021 Giesecke+Devrient Mobile Security GmbH Sujeito a alteração sem aviso prévio.