User manual
Contents 1 Important safety instructions General information Hearing Safety 2 2 2 2 Trainer sports headphones TH100 3 Box content Other devices Overview of your Bluetooth wireless headphones 3 3 4 3 Charge and pair your headphones 5 Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music Wear your headphones 5 5 7 7 7 9 5 Technical data 10 6 Notice 11 Declaration of conform
1 Important safety instructions General information To avoid damage or malfunction: Hearing Safety Danger •• To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Caution •• Do not expose headphones to excessive heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water.
2 Trainer sports headphones TH100 With the Trainer sports headphones, you can converse with friends and enjoy music during exercises. Box content Quick start guide Other devices A mobile phone or device (e.g. notebook, PDA, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the headphones.
Overview of your Bluetooth wireless headphones 6. 7. 8. 9. SafeSound/mute (call) Volume up Volume down Micro USB charging slot 10. Stabilizer button 11. NightNav light 12. NFC pairing area 1. 2. 3. 4. 5.
3 Charge and pair your headphones Charge your headphones Note •• Before you use your headphones for the first time, •• •• charge the battery for 5 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headphones, as connecting the headphones for charging will power the headphones off.
NFC pairing 1. Make sure you turn on the NFC function on your phone and your phone’s screen remains active. 2. Place your phone over the headset so that the NFC detection area of each device can touch each other. 3. Pair the headphones with the mobile phone. For detailed information, refer to the user manual of your mobile phone. Note •• Make sure your mobile phone has the NFC feature available and switched on. •• Make sure your mobile phone is not in standby mode.
4 Use your headphones Manage your calls and music Connect the headphones to a Bluetooth device Task Turn the headphones on. Turn the headphones off. 1. Turn on your mobile phone/Bluetooth device. 2. Press and hold to turn the headset on. →→ The blue LED flashes. →→ The headset is reconnected to the last connected mobile phone/ Bluetooth device automatically. Device control Check the battery level.
Music control Task Play or pause music. Volume up/ down. Skip forward. Other headphones indicator status Button / Operation Press once. Press once or press and hold. Press once. Skip backward. Press twice. Enable/disable SafeSound. Press once. The headphones are on but not connected to a Bluetooth device. Low battery level. Battery is fully charged. Call control Task Pick up/hang up a call. Reject an incoming call. Headphones status The headphones are ready for pairing.
5 Technical data • • • • • • • • 11 hours of music time or talk time 190 hours of standby time Normal time for a full charge: 2 hours Rechargeable Lithium-Polymer battery (190 mAh) Bluetooth 4.
6 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.thisistrainer.com. Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Trademarks Bluetooth The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google and the Google Logo are registered trademarks of Google Inc.
7 Frequently asked questions The other side cannot hear me on the mobile phone. The microphone is muted. Press once to enable the microphone. My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. My Bluetooth headphones are connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headphones.
How to clean the ear cushions? •• Hand wash the ear cushions in a water mixed with laundry powder. Do not twist or pull the cushions to avoid damage. Squish the cushions inside the soap water for around 10-15 minutes. •• Rinse the cushions in a clean bowl of water. Continue to keep the water running and squish the headphones until there are no more soap and bubbles coming from the cushions. •• Place the cushions on a hard surface and allow them to be completely dry.
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. UM_TH100_00_EN_v3.