BASS+ SHB4385 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 Your Bluetooth wireless headset What's in the box Other devices Overview of your Bluetooth wireless headset 3 Get started Charge the battery Pair between both sides of the headset Pair your headset with the Bluetooth device 4 Use your headset Connect the headset to a Bluetooth device Power on/off Manage your calls and music LED indicator status How to wear
1 Important safety instructions Hearing Safety General information To avoid damage or malfunction: Caution •• Do not expose headset to excessive heat. •• Do not drop your headset. •• Headset shall not be exposed to dripping or splashing. •• Do not allow your headset to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your Bluetooth wireless headset Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. With this Philips wireless headset, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. Charging case USB charging cable (for charging only) Quick start guide What's in the box Other devices A mobile phone or device (e.g.
Overview of your Bluetooth wireless headset 1 2 3 a Multi-function buttons b LED indicator c Micro USB charging slot 4 EN
3 Get started Charge the battery Note •• Before you use your headset/charging case for •• •• the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headset, as connecting the headset for charging will power the headset off. Charging case Connect one end of the USB cable into the charging case, and another end into the power source. »» The charging case starts charging.
Pair your headset with the Bluetooth device 1 Turn on the Bluetooth function of your mobile phone. 2 Pair the headset with the mobile phone. For detailed information, refer to the user manual of your mobile phone. Tip •• The headset stores the last 2 devices in the memory. If you try to pair more than 2 devices, the earliest paired device is replaced by the new one. The following example shows you how to pair the headset with your mobile phone.
4 Use your headset Connect the headset to a Bluetooth device 1 Turn on your mobile phone/Bluetooth device. 2 Press and hold the multi-function buttons on both sides of the headset for 2 seconds. »» The white LED lights on both sides of the headset flash 3 times. Power on/off Task Turn the headset on. Turn the headset off. Multifunction button Right and left headset Right and left headset »» Both sides of the headset are connected automatically.
Call control Task Pick up/hang up a call. Reject an incoming call. Multifunction button Right headset Right headset Switch caller during a call. Right headset Operation Press once. »» 1 beep. Press and hold for 1 second. »» 1 beep. Press twice. The headset is on but not connected to a Bluetooth device. Low battery level (headset). Low battery level (charging case). Voice control Task Siri/Google Now. Multifunction button Right headset Operation Press twice and hold for 1 second.
5 Technical data Headset • Music time: 6 hours (additional 6 hrs with charging case) • Talk time: 6 hours (additional 6 hrs with charging case) • Standby time: 200 hours • Charging Time: 2 hours • Normal time for a full charge: 2 hours • Rechargeable lithium ion battery: (105mAh) • Bluetooth 4.
6 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c. philips.com. Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
• Make sure the charging case is disconnected from the USB charging cable before removing the battery. Trademarks Bluetooth 1 2 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Siri 3 Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google and the Google Logo are registered trademarks of Google Inc.
7 Frequently asked questions My Bluetooth headset does not switch on. The battery level is low. Charge the headset. I cannot pair my Bluetooth headset with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headset. Pairing does not work. Make sure the headset is in pairing mode. • Follow the steps described in this user manual (see ‘Pair your headset with the Bluetooth device” on page 6).
The volume level of the headset is too low. Some Bluetooth devices cannot link the volume level with the headset through volume sync. In this case, you have to adjust the volume on your Bluetooth device and headset independently to achieve an appropriate volume level. How can I restore all original headset settings? 1 When the headset is powered off, press and hold the multifunction button for 10 seconds. »» You will hear doo-doo sound. The headset is off 2 Remove the old device name on the headset.
Copyright © Gibson Innovations Limited 2017. All rights reserved This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license UM_SHB4385_00_EN_V0.
English: Model: SHB4385 FCC ID: 2AANUSHB4385 ISED Cerification Number: 11260A-SHB4385 Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
French: Avis de conformité Cet appareil satisfait aux règlements de la FCC partie 15 du Code of Federal Regulations. Son fonctionnement est assujetti aux deux conditions suivantes : 1. Cet appareil ne doit pas causer d’interférence préjudiciable et 2. l’appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un fonctionnement non désiré.