Push SHB3075 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 Your Bluetooth wireless headphones What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music Wear your headset 2 2 3 3 3 3 5 5 5 6 6 6 7 5 Technical data 8 6 Notice
1 Important safety instructions General information To avoid damage or malfunction: Caution •• Do not expose headphones to excessive Hearing Safety heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your Bluetooth wireless headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. With this Philips wireless headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. What's in the box Quick start guide Other devices A mobile phone or device (e.g.
e Pairing/Mute button f Micro USB charging slot g +/Volume/Track control button 4 EN
3 Get started Charge your headphones than 4 devices, the earliest paired device is replaced by the new one. 1 Make sure that the headphones are fully charged and turned off. 2 Press and hold until the blue and white LED flashes alternately. »» The headphones remain in pairing mode for 5 minutes. 3 Make sure that the mobile phone is turned on and its Bluetooth feature is activated.
4 Use your headphones Manage your calls and music On/off Connect the headphones to a Bluetooth device 1 Turn on your mobile phone/Bluetooth device. 2 Press and hold to turn the headphones on. »» The blue LED flashes. »» The headphones are reconnected to the last connected mobile phone/Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device.
Voice control Task Siri/Google Now. Button Operation Press once. Wear your headset Adjust the headband to fit your head. Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The headphones are ready for pairing. The headphones are on but not connected to a Bluetooth device. Low battery level. Battery is fully charged. Indicator The blue LED flashes for every 8 seconds.
5 Technical data • • • • Music time: 8 hours Talk time: 8 hours Standby time: 166 hours Normal time for a full charge: 3 hours Rechargeable lithium polymer battery (240 mAh) Bluetooth 4.
6 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www. p4c.philips.com. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste.
packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
7 Frequently asked questions My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones. Pairing does not work. Make sure the headphones are in pairing mode. • Follow the steps described in this user manual (see ‘Pair the headphones with your mobile phone” on page 5).
2017 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. UM_SHB3075_00_EN_draft0.
