Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety 2 3 4 2 2 General information 2 Your wireless on-ear headset 3 What's in the box Other devices Over view of your wireless on-ear headset 3 3 4 Get started 5 Charge your headset Pair the headset with your mobile phone 5 5 Use your headset 6 Connect the headset to a Bluetooth device Manage your calls and music 6 6 Wear your headset Use with the audio cable 7 7 5 Technical data 8 6 Notice 9 Declaration of conformity Disposal of
1 Important safety instructions Caution • • • • • Do not expose the headset to excessive heat. Do not drop your headset. Headset shall not be exposed to dripping or splashing. Do not allow your headset to be submerged in water. Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft cloth, if necessary • dampened with a minimum amount of water or diluted mild soap, to clean the product.
2 Your wireless on-ear headset Quick star t guide Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless on-ear headset, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music; • enjoy music on non-Bluetooth devices with an audio cable. Other devices A mobile phone or device (e.g.
Overview of your wireless on-ear headset f e d c b a a Audio cable jack b Charging slot c Microphone d Volume/Track control button e Call/Music button f LED lights 4 EN
3 Get started 1 Make sure that the mobile phone is turned on and its Bluetooth feature is activated. 2 Make sure that the headset is fully charged and turned off. 3 Press and hold the call/music button for 10 seconds until the white and blue LED flashes alternately. » The headset remains in pairing mode for 5 minutes. 4 Pair the headset with the mobile phone. For detailed information, refer to the user manual of your mobile phone.
4 Use your headset Connect the headset to a Bluetooth device 1 Turn on your mobile phone/Bluetooth device. 2 Press and hold the call/music button to turn the headset on. » The blue LED flashes. » The headset is reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headset tries to reconnect to the second last connected device. Note • If you connect the headset to an iphone, ipad or ipod Touch (iOS version 5.
Other headset indicator status Use with the audio cable Headset status The headset is connected to a Bluetooth device, while the headset in standby mode or while you are listening to music. The headset is ready for pairing. The headset is on but not connected to a Bluetooth device. There is an incoming call. Low batter y. Indicator Blue LED flashes for ever y 8 seconds.
5 Technical data • • • • • • Minimum 10 hours of music time or talk time Minimum 350 hours of standby time Normal time for a full charge: 3 hours Rechargeable Lithium-Polymer batter y (230 mAh) 3.5 mm audio jack for corded headset mode Bluetooth 2.1+EDR or 4.
6 Notice Declaration of conformity Hereby Philips Consumer Lifestyle, declares that the M2BT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. This product has been designed, tested and manufactured according the European R&TTE directive 1999/5/EC. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.
Notice for the European Union Warning: Any changes or modifications made to this device that are not expressly approved by Woox Innovations may void the user’s authority to operate the equipment. Hereby, Philips Consumer Lifestyle, declares that Philips Fidelio M2BT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Canada: This device complies with Industry Canada licence-exempt RSS standard(s).
Énoncé de la FCC surl’exposition aux rayonnementsradioélectriques: cetappareilestconforme aux limitesd’exposition aux rayonnementsradioélectriques de la FCC pour un environnement non contrôlé. Cetémetteur ne doit pas êtreinstallé au mêmeendroitqu’uneautreantenneou un autreémetteur, niutilisé avec un teldispositif. Avertissement :Toute modification apportée àcetappareil qui ne serait pas approuvée expressément par Woox Innovations peutinvaliderl'habilitation de l'utilisateuràutiliserl'appareil.
7 Frequently asked questions My Bluetooth headset does not switch on. • The batter y is low. Charge the headset. • The audio cable is connected to the headset. Disconnect the audio cable. I cannot pair my Bluetooth headset with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headset. Pairing does not work. Make sure the headset is in pairing mode.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved.