User's Manual

14 15ENEN
6 Product
specifications
Note
•
Specications and design are subject to change without
notice.
Amplier
• FTC total output power 34W
• Left + Right : 18W (1%THD, 8ohm,
400Hz-20kHz)
• Subwoofer: 16W (1%THD, 8ohm,
40Hz-100Hz)
• RMS total output power: 45W RMS
• Left +Right 15W (10% THD 8 ohm
+/-0.5dB)
• Subwoofer 30W (10% THD 8 ohm
+/-0.5dB)
• Frequency response: 20 Hz-20 kHz / ±3
dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 800mV
• AUDIO IN: 400mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
• Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 112 kbps-320 kbps
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16, FAT32, NTFS
• Supports MP3 le formats
Bluetooth
• Bluetooth proles: A2DP
• Bluetooth version: 4.1
Main unit
• Power supply: 110-240 V~, 50/60 Hz
• Power consumption: 25 W
• Standby power consumption: ≤ 0.5 W
• Dimensions (WxHxD): 708 x 47 x 65 mm
/ 27.9" x 1.85" x 2.6"
• Weight: 1.0 kg
• Built-in speakers:
• 2 x racetrack midrange (122 mm/4.8"
x 35 mm/1.4", 8 ohm)
• 1 x Mylar tweeter (25.4 mm/1", 8
ohm)
Subwoofer
• Power supply: 110-240 V~, 50-60 Hz
• Power consumption: 15 W
• Standby power consumption: ≤ 0.5 W
• Impedance: 8 ohm
• Speaker drivers: 1 x 165 mm (6.5") woofer
• Dimensions (WxHxD): 165 x 240 x 295
mm / 6.5" x 9.5" x 11.6"
• Weight: 2.6 kg
Remote control batteries
• 1 x AAA-R03-1.5 V
5 Wall mount
Note
•
Before wall mounting, make sure the wall can support
the weight of this product.
• For wall mounting, this product must be securely
attached to the wall in accordance with the installation
instructions. Improper wall mounting may result in
accident, injury or damage. If you have any query,
contact Consumer Care in your country.
Screw length/diameter
Depending on the type of wall mounting this
product, make sure that you use screws of a
suitable length and diameter.
See the illustration in the quick start guide on
how to wall mount this product.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang this product on the fastening screws.
3.2-3.6 mm/0.13”-0.14”
≤7.9 mm/
0.3”
3.5-4 mm/
0.14”-0.16
”
>25 mm/0.98”