Product Info

Smart Gateway 10S Introduction
Hardware
 Integrated with Nordic Bluetooth and ANT+ chip (Ceramic Antenna)
 Standard CAN BUS protocol
 +5VDC/1.2A output power
Overview
The Smart Gateway 10S will collect all the necessary info from the e-bike system by CAN-bus, include
the different assist mode, system error code and battery capacity by communication. After that, the
Smart gateway 10S as a master controller of the e-bike system, it can send the command to the e-bike
system to change different assist mode and turn on/off light.
The Smart Gateway 10S extends the feature of an information hub, provides gather data from and
configuration for, more integrated and more hidden with all critical functions, although adding an
additional device, a clean handlebar, and more ergonomic design of remote button takes your E-bike
riding experience to new levels. The E-bikes equipped with Smart Gateway 10S can connect with the
Giant E-bike App with ANT+ profiles by Nordic Bluetooth and ANT+ chip.
1. 36VDC as the power supply was a need.
2. The power-up process is that pulls the pin 4 to low by 1.5s while SG10S in the
OFF state.
3. The led starting flashing with orange while SG10S was started, and then the BLE
and ANT+ enable both.
4. If the SG10S enters error mode, the led will red flash or keep on.
5. The power-off process is that pulls the pin 4 to low by 3s while SG10S in the ON
state.
Pin assignments LED Descriptions