OLYMPIA® OL3022 OWNER’S MANUAL
Copyright © 2004, Wave Industries Ltd. All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. First Edition: June 2005 Trademark Information Olympia® is a registered trademark of Olympia International Holdings Ltd. InfoGlobe® is a registered trademark of Wave Industries, Ltd. Disclaimer The information contained in this document is subject to change without notice.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS................................................................................. 4 Part I InfoGlobe Operation........................................................................................................ 5 1 InfoGlobe Features .......................................................................................................... 5 2 InfoGlobe Control Keys .............................................................................................
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Part I InfoGlobe Operation 1 InfoGlobe Features 15. 16. 17. 18. 19. 20. 21. 22. 23. CID name and number display Caller ID records - up to 54 records Real-time Clock Floating Messages (up to 30 characters) Built-in Year-round Greetings 6 User Programmable Alert Messages Automatic Daylight Savings Time Adjustment Demonstration Mode Captivating animation Programmable Timer on/off 2 InfoGlobe Control Keys LEFT Power ON / OFF – Hold LEFT down to turn Globe On and Off. Press and hold key for at least 1 second.
3 Powering Up 24. After OL3022 and the Base Unit is powered up, OL3022 should be placed in the cradle of the Base Unit for setting a new security code. 25. Each time OL3022 is placed on the cradle of the Base Unit, the Base will generate and transmit a new security code to OL3022. 26. The completion of a successful security code transfer operation will be indicated by a flash of the ‘In Use’ LED on the Base Unit and OL3022. 27.
This shows the time and date as set.
December 29-31 New Year’s Day Happy Holidays Wishing You A Prosperous New Year 7 Demonstration Mode This allows the user to view a selection of displays. This includes: 40. 41. 42. 43. 44. Date format Time format Preprogrammed seasonal greetings CID Information Preprogrammed daily greetings To activate and deactivate Demonstration Mode press RIGHT key for at least 1 second. Note: Caller ID information can still be received in this mode. The SELECT key is disabled in this mode.
63. Press RIGHT to move to the next location. 64. The hour field is blinking. Use UP or DOWN to select the current hour (be careful of am/pm). 65. Press RIGHT to move to the next location. 66. The minute field is blinking. Use UP or DOWN to select the current minute. 67. Press SELECT to confirm your programming. Note: The order of Day and Month will depend on how you set the Date Format. Time is also set upon receiving Caller ID information (however, you must set the year manually).
Entering Your Message 83. Use UP and DOWN on the blinking field to scroll through the upper and lower case letters of the alphabet, numbers 0-9 and punctuation marks. 84. Use the RIGHT key to move onto the next character. The LEFT and RIGHT keys may also be used to find the desired location for reselecting, editing, or deletion. 85. Hold SELECT down to delete flashing character. If it is at the beginning of the line, it deletes all the characters. 86. When your message is complete, press SELECT to confirm.
02>11/04 12:30am - 1-866-537-0384 CID with Number Only 03>11/04 12:30am - Private CID information blocked by caller. 04>11/04 12:30am - Message Waiting No CID data; a Message was left with your voicemail service. 05>11/04 12:30am - MW 186-653-7038 Message Waiting and Number available. 06>11/04 12:30am - MW 123-456-7890 David Jones Message waiting; Name and Number No CID There is no CID information.
94. Use the RIGHT key to move to the minute location MM. 95. Use UP or DOWN to set the desired minute. Use the RIGHT key to move to the locations for setting the ‘Timer OFF’ time in the same manner as above. 96. Confirm the setting by pressing SELECT. Note: Caller ID information will not be received when the InfoGlobe is turned off. 14 Troubleshooting the InfoGlobe 1. There is no rotation and display after plugging into an electrical outlet. Ensure that the AC adapter is plugged in properly. 2.
Part II Consumer Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back of this equipment is a label that contains, among other information, a product identifier in the format US: DDKW900BOL5800. If requested, this number must be provided to the telephone company. An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION: The Ringer Equivalence Number is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.
