IT7150 User manual
Safety precautions Safety Symbols Make sure to follow the directions below to prevent accidents and damage to the product. Failure to follow the accompanying directions may lead to serious injury or death. 1. Insert the power plug correctly until it is firmly in place. Failing to do so, may cause fire. 2. Do not use a damaged power plug, cord or outlet, as this may cause electric shock or fire. 3.Do not touch the power plug with wet hands, as this may cause electric shock. 4.
. Do not let water come into contact with or enter the power adapter, as this may cause electric shock or fire. Do not use the product outdoors in snowy or rainy weather, or near any water. When cleaning the floor with water, avoid any water contact with the power adapter. 4. Do not place the power adapter near a heater, as this may cause fire. Installation 1. When installing the product on a cabinet or shelf, do not let the front end of the product project beyond its front edge.
1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. The socket-outlet shall be installed near the equipment and shall be easily accessible 3. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS ================================================ 1.
Interference Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Package Contents: Please check the following items are included in the package: Wifi Digital Picture Frame 1pcs AC Power adaptor 1pcs Quick start Guide 1pcs USB Cable 1pcs Tips - The user manual is stored in the flash memory of Wi-Fi Digital Picture Frame. General Controls: 1. Back panel 4 5 3 1.DC Power input jack 2.LAN jack 3.
4 Mode Key 5.Battery door Left Panel: 1 2 3 4 1. Mini USB – Connect to PC 2. Reset button – Reset unit to factory preset 3. Audio output jack – Connect to external audio output. E.g. earphones, headphones, speakers 4.
1 2 1. SD (Secure Digital) / MMC (MultiMedia card) / MS (Memory Stick) / XD (XD-Picture card) card slot 2. CF (Compact Flash) card slot Connecting the power and USB: Connecting Power: 1. Connect the power adapter to the DC 5V/ 3A terminal at the back of the unit. 2. Plug the power cord for the product into a nearby outlet. 3. Slide the Power Switch to [ON] position to turn the unit on.
1. Connect an external USB-supporting device to your digital picture frame. Tips - The external devices connected to your Digital picture Frame are not recognized by your PC. When connecting an external device to the down stream port, use the USB cable provided with the external device. Some external products provide a cable that does not meet USB standards. Hence, they may cause a malfunction.
1.2 Select the Language - Tap [+] button to select the language. 1.3 End User License Agreement (EULA) - After select the language, user can review the Agreement.
- User can tap the check box of [I accept the terms in the license agreement] and tap [Ok] button. Use will enter into home screen. If user can the check box of [I do not accept the terms in the license agreement] and tap [OK] button, then a pop up will display below; 2. Home: Home Screen In Home screen, click the wall paper area, it enters to Home Settings.
Home Settings 2.1 Home Settings Selection: 2.1.1 Wallpaper - You can choose a still picture or slide show as wall paper in Home Screen. Selections: Still Picture / Slide Show Notes - After factory reset, the wall paper would be changed to default wall paper The selected still picture will be copied to internal memory. If users delete the picture in Photo application; it would not affect wall paper setup.
Photo Browser of Home Settings - Users need to select a picture. Click [ ] button to close and save the wall paper. When select “Slide Show”, - Click [ ] icon, it goes to “Photo Browser”. Users need to select picture which is the start of the slide show. When select “Slide Show”, it only displays; o Clock [ON] / [OFF] o Clock Mode – Disable o Calendar [ON] / [OFF] o News Bar – Disable Play slide show in Home screen - After exit Home Settings, it starts slide show playback.
Slide Show Control Buttons Icon Button Name Functions Menu button Go to Main Menu Previous button Go back to previous photo Next button Go to next photo Play button Start slide show playback Back button Back to Home Settings 2.1.2 Clock - Turn on / off the clock display in Home Screen. Selections: ON / OFF 2.1.3 Clock Mode - Select the display clock mode in Home Screen. Selections: Digital Clock / Analog Clock Clock Mode would be disabled if slide show is selected or the clock is turn off.
2.1.6 Exit Home Settings - Click [ ] button in Home Settings, a pop up screen appears. - Click [Yes] button, it saves settings and go back to HOME. Click [No], it would not save settings and go back to HOME. 2.2 Home Screen: Clock Menu button 2.2.
When the battery is empty, connect the Power adapter. The battery icon will flash from empty to full repeatedly. >>> >>> >>> >>> . When the battery is full and the Power adapter is connected, the battery icon will display . When the battery is not full and the power adaptor is disconnected, it display the current battery status. 2.2.2. Wi-Fi icon - Display the Wi-Fi status.
3. Clock and Calendar: Tips - If you want to set the time and date, please go to MENU > Settings > Date/Time. 3.1 Add Alarm - Tap the red area (Analogy Clock or Digital Clock) to view Clock in full screen. - Tap the screen, two icons will be appeared.
Clock Control Buttons Icons Icons Name Alarm button Functions Enter to Alarm Settings Back button Go back to previous page Alarm icon Alarm icon is on when alarm is active. 3.1.1. Alarm Settings Selection Alarm settings page 1 - Tap [ ] button to add alarm. Refer to Alarm Settings Page 2. User can set the maximum four alarm entries.
Alarm Settings Page 2 3.1.2 Alarm Title - In Alarm Settings Page 2, tap [keyboard] button to open the keyboard. Input the title of the alarm. Default titles are “Alarm 1”, “Alarm 2”, “Alarm 3”, “Alarm 4”. Keyboard 3.1.3 Alarm Time - In Alarm Settings Page 2, tap Settings Page 3. button to set Alarm Time.
- Alarm Settings Page 3 User can adjust the time just by tapping the up or down arrow button. Tap [Yes] button to save settings and return to Alarm Settings > Add page. Or tap [No] to return to previous page without save. 3.1.4 Repeat - User can select the desired alarm repeat mode. Selections: Once / Everyday / Week day. 3.1.5 Alarm Tone - - User can select the desired alarm tone. Selections: Tone 1 to Tone 5. 3.1.6 Alarm ON / OFF - User can turn on / off the alarm.
3.1.7 Save Alarm Alarm Settings Page 2 - Tap “Yes” to save your input or “No” to back to previous page without save. If users select “Yes” to save, the new created alarm entry will be shown in Alarm settings page 1 Edit button Delete button - Alarm settings page 1 User can tap [Edit] button to your alarm settings. User can tap [Delete] button to delete the whole alarm entry. 3.2 Alarm Control - When the Alarm time is reached, the alarm sounds is on. At same time, the Alarm Control Buttons are shown.
Alarm Control Buttons Button Snooze Button Name Snooze button Stop Stop button Functions Snooze the alarm. The alarm sound stops and then turns on again after 5 minutes. Stop the alarm. Tips - If users don’t tap Snooze button, it will beep the alarm tone for 5 minutes and it will stop. After 5 minutes, it will beep again. The alarm will repeat this sequence in 40 minutes. Afterward, it will turn off automatically. 3.
- Tap the red area to view the Calendar in full screen. 3.2.
Next Button Go to next month or next year Previous Button Go to previous month or previous year 4. Photo Player Double tap Photo icon in main menu to enter into photo player. User can view pictures in Frame, Disk, PC and Web. Tap the icon, it will show as follows: 4.1 Frame Select a photo and double tap, the full screen will show the photos in the frame. Tap the screen anywhere, a tool bar will be popped up and the photos will stop slide show mode.
Icons Icons Name Rotate left button Functions Rotate the picture Rotate right button Rotate the picture Zoom in button Magnify the picture Zoom out button Reduce the picture Actual size button Previous button Display actual size of the picture Display the previous picture Next button Display the next picture. Wallpaper button Play button Set the current picture turn into the wallpaper Start slide show playback Back button Back to Photo Player Screen 4.
At this moment, select a card or USB device and double tap, user can see the photos/files in it. 4.3 PC 4.3.1 Settings for Sharing the Photos on your PC A) Adding Photos to the Library .Run Windows Media Player (version :need Windows Media Player 11). Click the [Library] tab at the top.
Click [Add To Library] in the [Library] tab. In the [Add To Library] screen, select [My personal folders] under the [Select the folders to monitor] section and select the folder containing photos and click [Add].
Select the folder to share and click [OK] to add it. When user clicks [OK], the [Add To Library] window is closed and the [Add to Library by Searching Computer] is displayed. Wait until it finishes the operation and click [Close] when it is completed.
B) Checking Shared Photos In the Window Media Player, set the Category, which is under the [ ] symbol at the top left to [Picture]. In the [Library], select the All Pictures, Keywords, Date Taken, Rating, Folder settings and check whether the added photos exist in the library. C) Sharing Settings for Accepting Connections from Your Photo Frame In the [Library] tab, click on [Media Sharing].
In the [Library Sharing] window, click [Settings]. The [Library Sharing-Default Settings] window is displayed. In the [Library Sharing-Default Settings] window, set the [Media Type] to [Picture], both [Star ratings] and [Parental ratings] to [All ratings] or a required rating under the [Default Settings] section. If you want to add a device or computer which tries to connect to the library to the list automatically, check the [Add new devices and computers automatically] checkbox. 4.3.
4.4 Web Tap [Web] button, user can browse pictures in network album. User selects and taps the Web icon, then user can see the photo in it. It supports four kinds of photo frames: Picasa, Flickr, Frame Channel, Windows Live Space and Other. 4.5 Photo Setup 4.5.1 Setup Slide Show Tap the button, a drop down menu will be prompted.
Tap [Setup] to set the slide show mode. Slide Show Setup Screen Display Mode User can select the display mode of photo in Slide Show Selections: [Original], [Auto fit], [Fit to width] and [Fit to screen]. Transition Type User can select the transition type of photo in Slide Show Selections: [Dissolve], [Slide], [Blind], [Wipe], [Random] and [None]. Photo Interval User can select the photo interval time in Slide Show Selections: [5 Seconds], [15 seconds], [30 Seconds] and [1 Minute].
User can turn on / off the background music in Slide Show. If user taps [ON] button, user can select one music file. The background music will be started from this file. Tips: If user wants to change the slide show background music mode (Music repeat/ shuffle playback), please go to Media Setup to change the settings. 4.5.2 Setup Web Photo Account Get Web Photo from Internet We will explain by using Frame Channel. User can create your own account and upload photos. Connect to (http:// www.framechannel .
You can see your own account’s 4 Digit PIN. User name is your sign in name. User need to input the User name and 4 Digit PIN in Digital Picture Frame (Please refer the next section.). Note: If user wants to get photos from their friend’s Frame Channel account, user must know their friend’s User name and PIN code. Add Web Photo Account Tap the button, a drop down menu will be prompted and tap the [Setup]. Tap the button. User can enter into Web Photo Setup Screen.
Note: If your account is not Picasa, Frame Channel or Windows Live Space, your web photos may not be displayed perfectly. To learn how to get the web photo RSS address from internet, please see 4.5.
For Frame Channel, user need input a pin code. For Picasa and Windows live space, user only needs to input username. For Flickr and other, user needs to input the whole RSS link in Link. Save Tap [Yes] to save the web photo account settings and go back to previous screen. Tap [No] to exit without save. Note: If the user name input by user contains some invalid characters, there will be a pop up dialog to prompt user. User can tap [Yes] to re-input the username, or [No] to go back to Web photo setup screen.
- Edit an account: Tap - Delete an account: Tap to edit the existing account settings. to delete a web photo account. 4.6 Copy/ Delete Photos 4.6.1 Copy one/ Copy all User can copy one photo or copy all photos in current directory to your destination. Copy One Tap a photo you want to copy. Tap the button, a drop down menu will be prompted. Tap [Copy one] to copy your selected photo to you destination. See screen below. Copy One Photo Screen Select your destination and tap [Yes] to confirm.
Copy All Photos Screen Select your destination and tap [Yes] to confirm. User can tap [No] to cancel the copy all. 4.6.2 Delete one / Delete all User can delete one photo or delete all photos in current directory. Delete One Tap to select a photo you want to delete. Tap the button, a drop down menu will be prompted. Tap [Delete one] to delete your selected photo. Delete One Photo Screen Tap [Yes] to confirm the deletion or tap [No] to cancel. Delete All Select any photo.
5. RSS News Reader (RSS2.0) Tips - - To ensure you can view RSS news normally, the feed you added should comply with the standard RSS 2.0 protocol. You can search a feed link in internet with your PC, and then add it to your RSS News Reader. ATOM and KML format cannot be supported 5.1 RSS News Feed Screen - In Main Menu, tap [News] button to enter RSS News Feed Screen. It displays the News Feed which input by users or by default.
Other More Button More Icons Show other categories which are not displayed in current page. Icon Name RSS Feed Icon - Descriptions Represent one News Feed. The News Feed name is shown next to News Feed Icon. Double tap the News Feed Name to open a feed. RSS News List Screen is shown. (See 5.2 RSS News List Screen) 5.2 RSS News List Screen - Display the news headlines of one feed. It includes News Type Icon, News Headlines, Date and Time of the news.
- The unread news is in white color. The read news is in grey color. If it’s today news, it displays “Today” in date display. The time is from RSS News Feed. It means the posted time of the news. 5.3 RSS News Reader - Display the news text content and the media files of news.
Volume level buttons Adjust volume 5.3.1 RSS News Reader > News Text Content - In RSS News Reader Screen 1, tap the red circle area to enter RSS News Reader Screen 2 (Full Screen). RSS News Reader Screen 2 (Full Screen) - Tap the red circle area again to close the full screen. 5.3.2 RSS News Reader > News Media Player - Display media files (Pictures / Audio / Video files) of the RSS news. 5.
RSS News Feed Screen - Refresh: Tap button to open drop down menu and tap [Refresh] to refresh the all of RSS feeds. - Delete: Not support deletion in RSS News Feed Screen. 5.4.
- Refresh: Tap button to open drop down menu and tap [Refresh] to refresh the current RSS feed. - Delete One: Tap once to highlight one news headline and then tap > [Delete one] to delete the selected news. - Delete All: Select [Delete All] to delete all the news of one feed. - Delete All Read: Select [Delete All Read] to delete all read news. The read news are in grey color. 5.4.
Auto Download Media File - User can select to turn on / off to download the media files automatically when reading the news. - Selections: ON / OFF Keeps News For - User can select to keep the news history for 1 day to 7 days. - Selections: 1 day to 7 days. Update Interval - User can select the news updated interval time. - Selections: Manually / 5 minutes / 10 minutes / 30 minutes / 1 Hour / 12 Hours / 24 Hours 5.5.2 Add / Edit RSS News Feeds (Support RSS2.
When clicked the [News via RSS]. Then user can find the RSS list. When clicked [RSS] icon, an XML page is displayed, Copy the address displayed in the Internet Explorer Address box. This is the RSS address. Please make sure this is RSS2.0 format.
- In RSS News Setup, tap button enter to Feeds Setup screen. Feeds Setup Screen - Add a New Feed (Support RSS2.0 format): Tap to add a new feed. User can add 256 news feed in maximum. Feeds Setup Screen > Add New Link User can input the RSS News Feed Address by keyboard. Tap to input the address link and tap [OK] button to save your input. To learn how to get the RSS news feed address from internet, please see 5.5.2. Title User can input the name of news feed by keyboard.
Category User can choose one category for the inputted news feed Selections: [Local], [World], [Business], [Science], [Entertainment], [Sports], [Society] and [Other]. Save Tap [Yes] to save the news feed settings and go back to previous screen. Tap [No] to exit without save. New Added RSS News Feed The new created RSS news feed will be displayed in Feed Setup Screen, like this: New Added News Feed Screen - Edit a news feed: Tap - Delete a news feed: Tap to edit the current news feed settings.
6. Media Player - In Main Menu, tap [Media] button to enter Media Player. - Tap the button to hide the Media Player. User can enjoy music and internet radio while operating other applications. Media Player 1. 2. 3. There are three parts: Music, Video, and Internet Radio. All the audio files only appear in Music, all the video files only appear in Video, and all the internet radio stations only appear in Internet Radio. The audio and video files are from Frame, Disk and PC.
Speaker button Tap once to mute Silence button Tap once to cancel mute Increase volume button Increase volume level Decrease volume button Decrease volume level 6.1 Music / Video User can tap [Music] button to enter Music screen or tap [Video] to enter Video Screen. Tap once to select a file / disk / folder and tap again to open a disk / folder or start playback a media file. Frame Frame is the internal memory of the device.
Audio Now Playing Screen Tips When video file is playing, simply tap the video playback area once to scale to full screen. Tap anywhere again to close full screen video display. In order to provide the best video performance, the suggested video resolution is 320x240 or below and frame rate is 25fps or below. 6. 2 Internet Radio User can tap [Internet Radio] button to enter Internet Radio screen.
Internet Radio Screen Station Tap the [Stations] button to display all the of default internet radio stations. More Tap the [More] button, user can find the folder of My Favorite and the folder of My Added Stations. Internet Radio Now Playing Screen When connecting a radio station, the Now Playing Screen is shown. User can see the connecting status message or buffering status message.
Media Setup Screen Repeat Mode User can select the repeat mode of media playback. Selection: [None], [Repeat one] and [Repeat All] Repeat One = Repeat the current music/video file over and over again. Repeat All = Repeat all songs/video in the current playing list. Shuffle User can turn on / off the shuffle media playback. Selection: [ON], [OFF] ON = The media files will be played randomly. OFF = The media files will be played in sequent. The playback sequence is sorted by file name. 6.3.
My Station Screen Add a Station: Tap the to add a new internet radio station. User can add 256 stations in maximum. My Stations Screen > Add Title / Link / Country / Genre / Language User can input radio title name / internet radio link / country / genre / language by keyboard. Tap to input the content and tap the [OK] button to save your input. Save Tap [Yes] to save the new added internet radio stations. Tap [No] to exit without save.
- Edit an internet radio station: Tap - Delete an internet radio station: Tap to edit the current station settings. to delete a station. 6.4 Copy / Delete Media Files 6.4.1 Copy one/ Copy all User can copy one media file or copy all media files in current directory to your destination. Copy One Tap to select a media file you want to copy. Tap the button, a drop down menu will be prompted. Tap [Copy one] to copy your selected media file to you destination.
Copy All Select any media file. Tap button and select the [Copy all], user can copy all the media files in current directory to your destination. Copy All Media Screen Select your destination and tap [Yes] to confirm. User can tap [No] to cancel the copy all. 6.4.2 Delete one / Delete all User can delete one media file or delete all media files in current directory. Delete One Tap to select a media file you want to delete. Tap the button, a drop down menu will be prompted.
Delete All Select any media file. Tap button and select the [Delete all], user can delete all the media files in current directory. Note: In PC and Web, [Delete one] and [Delete all] buttons are disabled. 7. Tools - In Main Menu, tap [Tools] button to enter Tools Screen. It includes two applications; Clock and Calendar. Tools Screen - Tap Clock or Calendar to open clock / calendar application. (See 3. Clock and Calendar) 8. Settings - In Main Menu, tap [Settings] button to enter Settings.
1. Wi-Fi User can configure your Wi-Fi network. Please consult your Wi-Fi network administrator for all of the network settings. The device doesn’t support Hotspot login / web browser internet login. Tips: Please make sure the Wi-Fi network is connected successfully before you use any network related applications, e.g. Web Photo, Internet Radio, RSS News Reader.
Wi-Fi Network Search Screen - Tap [Connect] button to select an AP to connect. If the AP has network key, a screen will be prompt to remind user to input the network key. Please consult your Wi-Fi network administrator to get network key. Tap button to input the network key. - Tap [OK] to confirm. A Pop up “Connecting…” screen is displayed.
- After successfully connected to AP, user can see a green tick icon next to AP SSID name. Wi-Fi Network Search Screen Note: User can tap button return button to refresh the Wi-Fi AP list or tap to Network Settings Screen. User can tap [Clear] button to disconnect current AP connection and clear all of the settings in current AP including the network key. If connection is failed, a pop up message “Network Connection Failed” will alert user.
Tips: - Follow the steps ONLY if your AP SSID name is hidden. Please consult your Wi-Fi network administrator to confirm. - Since your AP SSID is hidden, you can’t see your AP in Wi-Fi Network Search Screen. After you input your AP details in Manual Edit Wi-Fi Network Screen, your AP can be shown in Wi-Fi Network Search Screen. - Go to Network Settings Screen. Turn on Wi-Fi: Tap [ON] button of Wi-Fi - Manual Edit Wi-Fi Network: Tap button to add / edit Wi-Fi Network manually.
button of Search - After successfully added the Wi-Fi network manually, tap - WiFi Network. User can see the new manual added Wi-Fi network name. Tap [Connect] button to connect the new manual added Wi-Fi network. 2. LAN Click [ON/OFF] button to enable or disable it. Click [MORE] button, you can view the details. 3. Advanced Settings Tips: - Follow the steps of Advanced Settings ONLY if your access point’s DHCP setting is OFF. The device needs to use a fixed IP address to connect to the AP.
Subnet Mask / Default Gateway / DNS Server o If the DHCP is OFF, user needs to input a Subnet Mask / Default Gateway / DNS Server by keyboard. to input and tap [OK] to save. o Tap Save o Tap [Yes] to save the advanced network settings and go back to previous screen o Tap [No] to exit without save. - After successfully set the Fixed IP address (DHCP is OFF) in Advanced Settings, please follow the same procedures of Setup Wi-Fi Network. (See 8.
8.2 Date / Time In Settings, Tap button to enter to Date/Time Settings Screen. Date / Time Settings Screen Date to enter Set Date Screen to set the Month / Day / Year. - Tap - Set Date Screen In Set Date Screen, tap [Yes] to save to save settings and go back to previous screen or Tap [No] to exit without save. Date Format - User can select different Date Format. - Selections: [MM / DD / YYYY] or [DD /MM / YYYY] or [YYYY/ MM / DD].
- Tap to enter Set Time Screen to set the Hour / Minute and AM / PM. Set Time Screen Note: If user selects 24 hours in Time Format, AM/PM will not be displayed. Time Format - User can select different Time Format. - Selections: [12 hours] or [24 hours]. Internet Time Synchronization - User can turn on / off the Internet Time Synchronization. - Selection: ON / OFF - If user select ON, the system time of your device would be synchronized with network GMT time. The network GMT time is from internet.
Time Zone Settings Screen 8.3 Display In Settings, tap button to enter Display Settings Screen. Display Settings Screen Screen Calibration - User can calibrate the touch screen in order to have a more precise sensitivity of touch panel. - Tap the button to start calibrate the screen. 5 points are needed to tap (4 points are on every corner and the 5th in the center) 8.3.2 Brightness - User can adjust the LCD Brightness level.
- Selections: [Level1] to [Level 8] 8.4 System In Settings, tap button to enter System Settings Screen. System Settings Screen Language - User can select the Language of system. Selections: [English], [French], [Spanish], [German], [Italian] and [Dutch]. Firmware Upgrade 1. Manual Firmware Upgrade - Tap the [Confirm] button to start checking for upgrade.
- - If the device firmware is the most upgraded, user doesn’t need to upgrade the firmware. If the device finds a new firmware in network, there will be a pop up dialog to remind user. Tap [Yes] button to download the new firmware or tap [No] button to cancel. If user selects [Yes] button, it starts downloading the new firmware.
- After downloaded successfully, user is requested to restart the device to install new firmware. - - Tap [Yes] button to restart now or tap [No] to restart later and return to System Settings Screen. The new firmware will be automatically installed next time the device is power on. After restart the device, please wait for installing the new firmware. - Tap [OK] to return to Home Screen after the upgrade process is success.
2. Auto Firmware Upgrade - The device always checks for upgrade automatically. If a new firmware is found, please follow the procedures to finish the upgrade. Factory Reset - User can reset the product settings to factory defaults. Tap the [Confirm] button and tap [Yes] to confirm. Show Details - User can review the system details In Show Details, it displays Software version, MAC Address, End User License Agreement and Frame memory status.
Show Details Screen Screen Taps Sound - User can turn on / off the screen tap sound. Selection: ON / OFF. 8.5 Power Management In Settings, tap button to enter Power Management Settings Screen. Power Management Settings Sleep Mode - User can set Sleep Mode and the sleep time in Interval Time. During the sleep time, the device will be turned off to save power.
device. The alarm is still active during the sleep mode. button to select a sleep mode. - Tap the - Selections: [OFF], [Once] and [Everyday]. OFF = Turn off Sleep Mode Once = Active the Sleep Mode once Everyday = Active the Sleep Mode every day. Power Management Screen Interval Time (Sleep Interval Time) - If user selects OFF in Sleep Mode, this function is disable. - Tap button enter to Interval Time Settings Screen. User can set the sleep time from when to when.
9. On Screen Display (OSD) Buttons 9.1 Open the OSD Buttons Press [MODE] key at the back casing to open the OSD buttons. On Screen Display (OSD) Buttons Note: In all application’s setup (Photo, News, Media, Home, Clock and Calendar) and Settings under Menu, the OSD buttons are disabled. There is no function when press [Mode] key during that time. 9.2 Close the OSD Buttons - Press [Mode] key again or tap the non OSD buttons area to close the OSD buttons. 9.
Media button If Media Player is hidden, user can tap Media button to direct go to Now Playing screen. If the Media Player is not hidden, the Media button is disabled. or Screen Lock button Lock the touch screen Screen Unlock button Unlock the touch screen Brightness button Adjust the LCD brightness. Tap once to open LCD Brightness bar and tap once again to close Volume button Adjust volume level.
Volume Level on OSD - Tap or to adjust volume level. - Tap to mute the speaker. Mute icon is shown. Tap again to turn off the mute. - Tap or once again to close Volume OSD buttons. Specifications Items Panel Specification Type 7’’ TFT digital touch panel Resolution 800X480 128 MB Build-in memory Standard Network Security Network DHCP / Fixed IP Channels Support 1-14 channels, subject to country regulation Standard USB2.
Input Battery AC 100 ~ 240V Battery model A0427 Battery Manufacturer Name EVE Energy CO., LTD. Battery Capacity 2100mAh Battery Voltage 3.7V Charging time Battery type Language Format 3.5 hours user non-replaceable battery English, French, Spanish, German, Italian and Dutch. Photo JPEG, BITMAP, GIF Audio WMA Internet Radio WMA Video WMV, MPEG1 RSS News RSS2.
with your PC. 2. Make sure you have added some photos / Media files to your sharing center through Windows Media Player11 and have allowed the Digital Picture Frame to visit them.(see the Photo-> PC part in the manual) 1. I added a web photo account but the photos cannot be displayed on the Digital Picture Frame. Make sure your Digital Picture Frame has been connected to a network which can access Internet. 2. Make sure the link you added is correct. 3.
again. The news feed I added can not be played. Make sure the feed is in RSS 2.0 format. 1. Make sure the Digital Picture Frame has been connected to a network which can It may response slowly when connecting to the internet radio. access Internet, and the network is in a good status. 2. Make sure the internet radio format is supported. 1. Try to pause the playing and play again.