User's Manual

ManualsBrandsGiant Telecom ManualsElectronics2.4GHz DSSS 10ch Cordless Phone w/ CID

Table Of Contents

Connecting the Base Station and Power Plug
Connecting the Charging Station #
 Install and Charge the Batteries
 Place the handset in the base station to charge for 16 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised.
Using the Handset Telephone
- Using the telephone
-  When the handset is inserted in the station charging unit, it starts to charge automatically. To optimize the battery performance, charge the handset battery for 14 hours prefer to first use.
Selecting the Language
Making Internal Calls
-  Press key during standby mode.
-  Press a digit to specify which handset (1..4) to call to.
-  The other handset will ring with the icon flashing.
-  When other handset answered, the internal call is established.
-  Press key to end the call.
Making External Calls
- Normal dialling
-  Press key and wait for a dialling tone.
-  Dial the telephone number.
-  Press key to end the call.
  - On hook dialling
-  Dial the telephone number (delete incorrect entries by pressing key).
-  Press key to carry out the conversation.
-  Press key to end the call.
Taking Calls
- Handset is in the base station
-  Take the handset from the base station; a connection is automatically established (when the AUTO TALK function is active). Otherwise, press key.
-  Press key to end the call.
  - Handset is not in the base station
-  Press key to make a call.
-  Press key to end the call.
Redialling
- The phone stores the last ten numbers dialled in the redial memory.
-  Press key; the last call number dialled is displayed.
-  Press or key to search the required number in the redial memory list.
-  Press key to carry out the conversation.
-  Press key to end the call.
- Note: 1. If the number is longer than 16 digits, only the last 14 digits will be shown.
- 2. Name is displayed instead if number is matched with phone book memory.
Dialling from the Phone Book
-  Press key; the first entry in the phone book appears. (Or PHONEBOOK EMPTY if no entry)
-  Press or key to select the required subscriber from the phone book. Alternatively, enter the first letter of the name required.
-  Press key to carry out the conversation.
-  Press key to end the call.
  - Note: How to store entries in the phone book is explained in the Chapter “Phone Book”.
Call Log Operations
- Browse, Call Back, Delete, Store
-  Press to enter CALL LOG memory.
-  Browse: Press or key to browse through the CALL LOG memory.
-  Call Back: press or key to call back.
- Or
-  Press to select DELETE? by using or key.
- Or
-  Press to select DELETE ALL? by using or key.
- Or
-  Store: Press to enter CALL LOG menu.
-  Press to select SAVE NUMBER by using or key.
-  Press key to save the entry in phone book memory.
  - Note: The CALL LOG icon and display indicator disappear only after browsing through all the entries.
  - Edit Call Log memory
-  Press 0-9 to add digits in front of CLI number.
-  Press to remove entry or leftmost digit.
-  Press or key can recover the original CLI number.
- Example:
Holding Calls /Forwarding Calls
-  Press key to put the call on hold and dial the extension number (e.g. 23).
-  Press key once more can re-take the call again or press key to forward the call.
Intercom Call Transfer
Teleconference
-  Press and enter the number of the corresponding handset (e.g.2) which will join the teleconference.
-  The external caller is kept on hold. As soon as handset 2 takes the call, the internal connection is established.
-  Press the key any time, and then press or key scroll to “CONFERENCE”.
-  Press will start the 3 way conference.
-  Press again, “SINGLE CALL” will show and then press will end the 3 way conference and return to intercom call.
- Note: The handset which initiates the intercom call can switch between the phone call and the intercom handset by pressing key and then press or key to select “SWITCH”.
-  By pressing the key, any of the handsets can quit from the teleconference and the other handset continues with the external call.
Handset Speaker Phone
Changing the Receiver Volume
-  Press or key to change the receiver volume during a call.
Muting the Ringer volume
Muting the Microphone
-  Press key can switch the microphone on or off during a call. The icon turns on or off.
Paging the Handset
Entering a Dialling Pause (P)
Switching the Key Lock On/Off
- Incoming calls can still be received when key locked.
  - Store Entries
-  Press key to access phone book memory.
-  Press key to access phone book menu.
-  Press or key to select ADD NEW and press key.
-  Enter number (max. 24 digits) and press key when finished.
-  Enter name (max. 15 characters) and press key when finished.
  - List Entries / Edit Entries / Delete Entries
-  Press key to access phone book memory.
-  Edit Entry: Press or key to scroll.
-  Press key to select a desired entry, and then press or to select the submenu EDIT.
-  Press to start Number edition and press key again to start Name edition.
-  Press key to confirm.
- Note: Press key to delete any incorrect input.
- Or
-  Delete: Press or key to scroll.
-  Press key to select a desired entry, and then press or to select the submenu DELETE？.
-  Press key to delete the entry.
-  Press key again to confirm.
Changing the Handset Ringer Melody
Changing the Ringing Volume
- Low Battery
- No Coverage
- Key Tone
Activating/Deactivating Automatic Call Answering
Setting the Alarm
Entering/Changing Handset Name
- Changing the contrast setting
- Default Settings
Changing the Base Ringer Melody (external / internal)
Changing the Ringing Volume
Changing Base PIN Code
Changing the Dialling Mode
Changing the Flash Time
VMWI
Setting the Area Code
Reset Base
Date / Time
Registration
Registering Additional Handsets
-  Press key until the REGISTRATION menu appears and press key.
-  Press or key to select the submenu REGISTER and press key.
-  Handset display shows SEARCHING.
-  Press and hold page key on the base station for 10 seconds until acknowledgement signal is heard.
  - Note: 1.Once the registration procedure is completed, the new handset will automatically be allocated the next available handset number.
Remove a Handset from the Base
-  Press key until the REGISTRATION menu appears and press key.
-  Press or key to select the submenu REMOVE HANDSET and press key.
-  Enter the PIN (factory setting =0000) and press key
-  If necessary, use or key to select the handset and press key. REMOVE HANDSET? will show on the display.
-  Press key to confirm.
-  For guidance only, depends on initial battery charge.
Consumer Information

22437

2.4GHz Digital Cordless Telephone

with Dual Mode Call ID

User manual

[photo]

Thomson Teleco

46, Quai Alphonse le Gallo,

92648 Boulogne Cedex, France

is a trademark of General Electric company used under license to Thomson Inc.

Indianapolis, IN 46290

Model: 22437

(Rev. 0 E)

06-35

Printed in China

– 1 –

Summary of content (18 pages)

PAGE 1
22437 2.4GHz Digital Cordless Telephone with Dual Mode Call ID User manual [photo] Thomson Telecom 46, Quai Alphonse le Gallo, 92648 Boulogne Cedex, France is a trademark of General Electric company used under license to Thomson Inc. Indianapolis, IN 46290 Model: 22437 (Rev.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
PAGE 3
THE CAUTION: TO EXCLAMATION REDUCE THE RISK WITHIN THE OF ELECTRICAL TRIANGLE IS SHOCK, DO NOT WARNING SIGN REMOVE COVER ALERTING YOU (OR BACK). NO OF IMPORTANT USER INSTRUCTIONS SERVICEABLE ACCOMPANYING PARTS INSIDE. THE PRODUCT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. SEE MARKING ON BOTTOM / BACK OF PRODUCT THE LIGHTING FLASH AND ARROW HEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF “DANGEROUS VOLTAGE” INSINDE THE PRODUCT.
PAGE 4
Connecting the Charging Station # Insert the power plug in the socket on the rear side of the charging station. Insert the power plug at the other end in the power outlet. The charging station is now ready to operate. CAUTION: Use only the Thomson power supply that came with this unit. Using other power supplies may damage the unit.
PAGE 5
1- CALL LOG 2- PHONE BOOK ADD NEW ENTER NUMBER ENTER NAME SELECT EDIT DELETE? CONFIRM? 3- SETUP HS RING MELODY MELODY 1-8 RING VOLUME [-----] TONES LOW BATTERY ON NO COVERAGE OFF ON OFF KEY TONE ON OFF AUTO TALK ON OFF ALARM ON TIME HH:MM OFF HANDSET NAME LANGUAGE ENGLISH FRANÇAIS ESPAÑOL CONTRAST [-----] RESET RESET? 4- SETUP BS RING MELODY MELODY 1-5 RING VOLUME [------] CHANGE PIN ENTER PIN DIAL MODE TONE PULSE FLASH TIME 100ms/120ms/250ms/270ms/300ms/370ms/600ms/800m
PAGE 6
Redial / up key Caller ID / down key Menu / OK key Cancel / mute key Flash key Intercom key Phone book key Speakerphone key Off key Talk key Asterisk / ring off / temporary tone dialing key Hash key/Keypad lock key Pause key page Paging Charging (amber) * VMWI / In use (blue) * Depending on the country and service availability and subscription to the operator.
PAGE 7
Using the Handset Telephone Using the telephone When the handset is inserted in the station charging unit, it starts to charge automatically. To optimize the battery performance, charge the handset battery for 14 hours prefer to first use. Note: This phone defaults to Tone Dialing. To change Pulse Dialing, see chapter “Base Station Settings – Changing the Dialing Mode”. If you don’t know which type of service you have, please check with the local telephone company.
PAGE 8
Handset is in the base station Take the handset from the base station; a connection is automatically established (when the AUTO TALK function is key. active). Otherwise, press Press key to end the call. Handset is not in the base station Press key to make a call. Press key to end the call. Redialling The phone stores the last ten numbers dialled in the redial memory. Press key; the last call number dialled is displayed. Press or key to search the required number in the redial memory list.
PAGE 9
Note: The CALL LOG icon and display indicator disappear only after browsing through all the entries. Edit Call Log memory When browsing Call Log memory, Caller Line Identification (CLI) number can be edited before dial back. Amended CLI number will not overwrite the stored Call Log memory. Press 0-9 to add digits in front of CLI number. Press to remove entry or leftmost digit. Press Example: or key can recover the original CLI number.
PAGE 10
Changing the Receiver Volume Press call. or key to change the receiver volume during a Muting the Ringer volume Press and hold key for 1.5 seconds in idle mode to icon turns on activate or deactivate the handset Ringer. The or off. Muting the Microphone Press call. The key can switch the microphone on or off during a icon turns on or off. Paging the Handset If a handset has been misplaced, it is possible to call all the handsets. Short press page key on the base station.
PAGE 11
Press to start Number edition and press start Name edition. Press Note: Press Or key to confirm. key to delete any incorrect input. Delete: Press Press key again to or key to scroll. key to select a desired entry, and then press or to select the submenu DELETE？. Press key to delete the entry. Press key again to confirm. Handset Settings Changing the Handset Ringer Melody You may select one of the 8 available handset ringer tones for your incoming calls alert tone. Press key. Press key.
PAGE 12
Press or key to select ON or OFF. Press key to confirm the setting. Note: Out of range warning beep only can be activated in talk mode. Key Tone You may set the key tone to ON or OFF when you press the keypad. Press key. Press key. or key to select SETUP HS and press Press or key to select TONES and press Press key. or key to select KEY TONE and press Press Press or key to select ON or OFF. key to confirm the setting. key.
PAGE 13
Press key to confirm the setting. Default Settings This option allows user to restore the cordless handset to the default setting. 1. Press key. 2. Press key. 3. Press or key to select RESET and press the LCD will display RESET?. Press key to confirm the setting. 4. or key to select SETUP HS and press key, Base Station Settings (using the Handset) Changing the Base Ringer Melody (external / internal) You may select one of the 5 available base ringer tones for your incoming calls alert tone.
PAGE 14
needs. Press key. Press key. or key to select SETUP BS and press Press key. or key to select DIAL MODE and press Press Press or key to select TONE or PULSE. key to confirm the setting. Changing the Flash Time You may select flash time form 100ms to 800ms according to your needs. The default setting is 600ms. Press key. Press key. or key to select SETUP BS and press Press key.
PAGE 15
number key, press key to confirm the setting and enter month and date setting. Input the correct month and date, the format is: date/month (date range: 01-30/31, month range: 01-12) using number key, press key to confirm the setting and enter time setting. Input the correct time, the format is: hour/minute (hour range: 00-23 for 24 hours format or 01-12 for 12 hours format; minute range: 00-59) using number key, and set the “am” , “pm” or 24 hours format using or key. Press key to confirm the setting.
PAGE 16
For guidance only, depends on initial battery charge. General Product Care Simply wipe the base station with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge. Periodically clean the charge contacts on the handset and base and charger with a soft cloth. Troubleshooting Guide PROBLEMS Registration not work. No display. CAUSES The battery is not sufficiently charged. Handset and base station were not prepared for registration. The battery has not been charged.
PAGE 17
6. service commission or corporation commission for information. This equipment is hearing aid compatible. NOTICE: 1) If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this phone does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
PAGE 18
Environment “WEEE” weight: 0.447Kg Used equipment and used handset batteries must be disposed of in compliance with current environmental protection regulations. You should return them to your reseller or dispose of them at an approved recycling centre. Do not attempt to open the batteries, as they contain chemical substance. In the event of leakage, avoid contact with the skin, eyes and mouth. In the event of contact, rinse the affected part for several minutes in running water.