User's Manual

– 0 –

Bluetooth Remote PTT

User’s Guide

Important Safety Information

Please observe the following to ensure reliable operation of the Bluetooth Remote PTT

1. Read this manual thoroughly and observe the operating instructions and information provided.

2. Do not expose the equipment to extreme temperatures or high relative humidity and protect it from

direct sunlight and dusty conditions.

3. Clean the equipment with a soft, damp cloth. Do not use any solvents or aggressive cleaning agents.

4. Only connect approved accessories.

5. Only use the power plug supplied.

6. Never open the unit. Opening the unit annuls claims under the terms of guarantee and exposes the

person to the risk of an electric shock.

7. Repairs to defective units should only be carried out by service centers of Giant International Ltd..

8. Batteries built into device are NOT user replaceable. Discard used batteries according to the local

regulations.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications or changes to this equipment. Such modifications or changes could void the user’s

authority to operate the equipment.

Remote PTT Overview

1. Power on/ Off Multi Function Button (MFB) 2. Push-to-Talk (PTT) Button

3. Bluetooth LED Indicator 4. Headset Jack 5.

Charging Port

PAGE 1
Bluetooth Remote PTT User’s Guide Important Safety Information Please observe the following to ensure reliable operation of the Bluetooth Remote PTT 1. Read this manual thoroughly and observe the operating instructions and information provided. 2. Do not expose the equipment to extreme temperatures or high relative humidity and protect it from direct sunlight and dusty conditions. 3. Clean the equipment with a soft, damp cloth. Do not use any solvents or aggressive cleaning agents. 4.
PAGE 2
Turn it on/off To turn on/off your remote PTT, press and hold the [MFB] button for about 2s. Charge Remote PTT The Remote PTT comes with rechargeable battery that must be fully charged before you use it for the first time. 1. Connect the power adapter to the unit. Plug the AC adapter into the electrical outlet. 2. The LED will be red when charging. If the LED is not red, check the connection. 3. During charging, the red LED will be lit. When the remote PTT is fully charged, the red LED will be blue. 4.
PAGE 3
Release PTT Blue LED flashes at a 5 seconds interval Steady Red Steady Blue Flash Red Release PTT button Charging Charged Low Battery Auto Power OFF 5 minutes after Connectable mode ( No pairing ) –2– LEDs OFF