Product Info

The REN is useful to determine the quantity of devices you may connect to your telephone
line and still have allof those devices ring whenyour telephone number is called.In most, but
not all areas, the sumof the RENs of alldevices connected to one line should not exceed five
(5.0). To be certain of the number of devices you may connect to your line, as determined by
the REN, you should contact your local telephone company to determine the maximum REN
for your calling area.
If your telephone equipment causes harm to the telephone network, the telephone company
may discontinue your service temporarily. lf possible, they will notify you in advance. But if
advance notice isn't practical, you will be notified as soon as possible. You will be informed of
your right to file a complaint with FCC.
Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the proper functioning of your equipment. If they do you will be
notified in advance to give you an opportunity to maintain uninterrupted telephone service.If
you experience trouble with this telephone equipment, disconnect from the network until the
problem has been corrected or until you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company.
Connecting to party lines is subject to state tariffs.
This equipment is hearing aidcompatible.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance couldvoid the user's authority tooperate the equipment.
CAUTION: To maintain compliance with the FCC's RF exposure guidelines place the base
unit at least 20 cmfrom nearby persons
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interferencein a residential installation. For body worn
operation, this phone has been tested and meets the FCC RF exposure guidelines when
used with the belt clip supplied or designated for this product. Use of other accessories may
not ensure compliance with FCC RF exposure guidelines. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receivingantenna.
Increase the separation between the equipment and receiver.
Connect the equipment into anoutlet on a circuit different from that to which the receiver is
needed.
Consult the dealer or an experienced radio TV technician for help.
FCC WANTS YOU TO KNOW
8
This equipment complies with part 68 of the FCC rules and the requirements adopted
by the ACTA. On the bottom of this equipment is a label that contains, among other
information, a product identifier in the format US:2XGWI00B2G4G4NNN. If requested,
this number must be provided to the telephone company. And the Universal Service
Order Code (USOC). which is RJ-11C, for this equipment and that the Jack is FCC and
ACTA Compliant.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) This device must
accept any interference received, including interference that may cause undesired operation.
Privacy of communications may not be ensured when using this phone.