GH2430 Operation Manna 20 Jun 2000 Page 1877 ver 3.4 15. Page / Handset Locator page Send a signal from the base to handset. Press PAGE button on base and a series of rings will sound from handset. The sound will be stopped automatically after about 30 seconds or the PAGE button on base is pressed again, The display will show ‘PAGING’. PAGING 16. Out of range Cut of range ~When the TALK button 5 pressed while the handset is at the out of range, an eee tone will sound.
GH2438 Operation Manual 20 Jun 2000 Page 19/27 18. TAD Feature var 2.
GH2430 Operation Manual 20 Jun 2000 Page 20027 ver 14 20. OGM [ET “There are 2 per-recorded OME [OGM & OMIT OGM: “Hello! Please leave our name and phone number after the beep.” QGM2: “Hello! Our machine cannot accept messages. Please call gain's” 2 user record OOM stored in the flash RAM { {O0M3 & OGM} Maximum recording time is 60 seconds cache. Note: BGM & OGM: for Answer On GMI & OGM: for Announce Only mode Recording -Truss and hood GREETING button Tor 2 seconds.
nen Sse (FH 2430 Operation Manual 2 Jun 2000 Page 2127 ver 2.4 ! 12. ICM playback | Detail function “PLAY, SKID. REPEAT. PAUSE and SOFT functions are available for playback, ~Message number and Hume stamp is announced before cache message. i ~Message playback starts from the message recorded first and continues. “When there are New and Old message. only New messages wit! be played.
GHZ430 Operation Manual 20 Jun 2000 Page 2ME7 ver 2.4 25. PROGRAM Mode Setting security code At idle, press and hold FLASHLIGHT button for 2 seconds, Press ¥ three times 10 set security code. LCD will display ‘PASSWORD? and current security code. The first digit '0¢ is flashing. {default Password is 000} PASSWORD? 000 Enter 3-digit for Password PASSWORD? 123 Ex} Password is set wo 123 To correct wrong entry, press move the flashing sigh left or right for the desired digit.
Page 23/27 ver 2.4 26, Call Screen Call Serene | -By pressing “CS/REMOTE” , OGM and ICM can be monitored by the handset ~The microphone is muted during this mode GH2430 Operation Manual 20 Jun 2060 27. REMOTE CONTROL by Handset | General “Following functions are available.
GH2430 Operation Manual 20 Jun 2000 Page 24/27 ver 2.4 28. REMOTE CONTROL through C/O line General -Following functions are available. Dial buttons {© play new play all erase gumball repeal previous message stop skip message Answer On Announce Only Answer Off &. OOM recording WR ety Detail function ~Enter correct Remote Security code during OGM playback or 10M cording will set the base unit 10 remade control stand-by mode. A confirmation wae is sent and then Help Menu will be heard.
GH2430 Operation Manual 20.Jun 2006 Page 25027 ver 2.4 VOICE MENU Note: The following comprehensive list of voice prompt is for beer illustration of the aforesaid operation and should be erected as an indispensable part of the functional specification. Announcement | 1. GREETING button Press and release Answer On Fella, Please leave vor name and phone number doter the beep, (ef TG) Announce Only {OOM} or Help, cur making cannot accept messages. Please call nap.
GH2430 Operation Manna Page 26027 Re mate control mode by Handset 20 Jun 2000 ver 2.4 Remote control sequence start {mew and old messages } Vou have 6 7 messages / oldie / 37 Rew messages. Press 1 710 playback new messages. Press 2/ to playback all messages. Press 3 / wn erase / messages. Press answer mode Press 87 to set tp / announce only. Press 94 10 tum off / answer mode. Press 7 to listen © greeting. Remote control sequence start {only ald messages ¥ You have / 67 messages.
GH2430 Operation Manual Page 2727 8. Remote control mode through C10 Ine 20 Jun 2000 ver 1.4 Remote contra] sequence start {new and old messages } on nave 1 67 messages / in chiding | 2 new messages, Press | / t playback new messages Press 2/ to playback all messages. Press 37 6 eave! messages. Press 4 for offer functions. Remote control sequence sir {oily old messages) You have / 5 7 messages. Press 1/ to playback new messages. Press 2 / fo playback ail messages. Press 3 / to erase / sues sages.
GH2430 Operation Manual 20 Jun 2000 Page [827 ver 2.4 15. Page / Handset Locator page Send a signal from the base to handset. Press PAGE button on base and & series of rings will sound from handset, The sound will be stopped automatically after about 3 seconds or the PAGE button on base is pressed again, The display wil show "PAGING". PAGING 16. Out of range Qut of range «When the TALK button is pressed while the handset 3s at the out of range, au error tone will sound.
GHI430 Operation Manual 20 Jun 2000 Page 1927 ver 2.4 18. TAD Feature i Answer mode Answer On mode. Announce Only mode & Answer OF mode can be defected by the ANS ON/OFF button on has unit 00M <2 per-recorded GUM {Answer On & Announce ugly mode} -2 user record GM (Answer Dp & Announce oily mode) Maximum recording time is 80 seconds 3 Recording ume 5 min (JOM + MEMO + OGM + Voice Prompt) using 45 Gash J | Iceman vectoring messages (ICM.
GH2430 Operation Manual 20 Jun 2006 Page 20,27 ver 24 20. OGM Central ~There are { per-recorded Ohms {OMIT & DOGMA) OGM: “Heller! Please leave your name and phone number after the beep.” OGM: “Hill! Our machine cannot accept messages. Please call again.” -2 weer record OGM stored in the flash RAM { (DOGMA & OOM) Maximum recording time is 80 seconds each. Note: OMIT & OOMPH: for Answer On ORGASM & COMA for Announce Only made Rewording “Press and hold GREETING locution Tor 2 seconds.
GH2430 Operation Manual 20 Jun 2000 Page 21/27 22, ICM playback war 2.4 Detail function -PLAY, SKIP, REPEAT. PAUSE and STOP functions are available for playback. ~Message austerer and time stamp is announced before gate message. ~Message playback starts from the message recorded first and continues. When there are New and Old message. ably Now messages will be played. splashed number of the message will count up «nad indicate the message amber being played.
GH2430 Operation Manual 20 Jun 2000 ver 2.4 25. PROGRAM Mode Sang security code -At ide, press and hold FLASHLIGHT button for 2 seconds. Press ™ three times to 581 security code, LED will display ‘PASSWORD? and current security ome. The first dig “0° is flashing. {default Password is 000) PASSWORD? 000 Ene digit for Password PASSWORD? 123 Ex.
GHI430 Operation Manual 20 Jun 2000 Page 23/27 26. Call Serene ver 2.4 Call Screen. | -By pressing “CS/REMOTE” , OGM and ICM can be monitored by the handset ~The microphone is muted during this mode 27.
GH2430 Operation Manual Page 24/27 20 Jun 2000 ver 2.4 28. REMOTE CONTROL through C/O line General following functions are available. Dial buttons © play aew : play all : erase salmonellae 3 repeat previous message T step ip message © Answer On & Announce Only % Answer Off § OGM recording APB EM Foresail faction Enter correct Remote Security code during OGM playback or KOM recording will set the base unit ie remote control stand-by mode. A confirmation tong is sent and then Help Menu will be herd.
GH2430 Operation Manual Page 25/27 20 Jun 2000 ver 1.4 VOICE MENU Now: The following comprehensive Hst of voice prompt is for beret castration of the aforesaid operation and showed be waved as an indispensable part of the functions specification. 1. GREETING button For 1 Announcement Press and release Answer On Announce Only | {UM-4) of Hello.
GH2430 Operation Manual Page 26/27 7. Remote control mate by Handset 2H Jun 2000 ver 2.4 Remote control sequence start new and old messages } Vo hve 7 67 roes sages / including / 37 new messages, Press 17m playback new messages. Press 2 / @ playback all messages. Press 3 { to erase / massages. Press 7/ to turd on / answer mode. Press 8/10 set to / announce only. Press 9/ to wrn off / answer mode. Press §/ to listen 10 greeting. Remote control nonuser start only old messages You lave / 7 messages.
GH2430 Operation Manual 20 Jun 2008 ver 2.4 e— Remote control sequence skirt (new and nid messages | You have / & messages / including / 2/ new messages. Press 1/ to playback new messages. Press 2/ to playback all messages. Press 3 / to gravel messages. Press 4 for other functions, Remote control sequence start only old messages § You have / 6 / messages Press § / to playback new messages. Press 2/10 playback all messages. Press 3/ to erase / messages. Press 4 for other functions.