User's Manual

ManualsBrandsGHI International ManualsElectronicsHUB

User Manual

1. Introduction

1.1Document Description

This document defines the features, performance, and manufacturing requirements for the USB 2.0 USB

HUB,supporting one media standards in eight card slots.

The HUB will be supplied to interface to an industry standard USB port. The HUB shall provide read and

write capabilities for the following formats ：Fast data/File access and transfer rate up to 480Mbp/Sec

1.2 Purpose

This document is a specification to be provided to customers to qualify the USB 2.0 All in One HUB

2. General Specifications:

The following general requirement list is to be achieved by this product offering:

Interfaces

·HUB supports USB 2.0 standard (also compatible to USB 1.1 ports).

Media Supported Fast data/File access and transfer rate up to 480Mbp/Sec

Link up to 127 USB Devices

Operation System Supported

·Microsoft – Win 98 SE, ME,2000,XP,VISTA

·Apple MAC – OS 9.1/X

3. Electrical Specifications

3.1 USB Interface

3.1.1USB Compliance

The HUB shall be compliant with the USB 2.0 standards.

3.1.2 ESD Protection

The HUB shall provide ESD protection to prevent damage to the flash HUB due to external ESD sources.

3.2 Flash Media Connectivity

The HUB media ports shall designate along with a LED to show if a card is properly inserted and when

data is being read or written to and from the Media card.

3.3 HUB Power

The HUB shall be powered through the USB connection leading from the motherboard USB connector.

The USB HUB shall draw no more than 0.15 amps of power from the motherboard USB connector.

DC:output:5v/2A

4. Mechanical Specifications

4.1 Dimensions (Detail see the mechanical drawing)

·Dimensions

4.2 HUBWeight

·HUB weight About 29g

4.3 Frame Material

The housing of the HUBshall be constructed of ABS plastic

5. Driver Support

5.1 Operating System Support

Driver should include installation driver for Windows 98 SE.( Driver program will be provided at the

appointed website for download )

5.2 Language Support

Any supplied drivers shall include English language support only.

5.3 Plug and Play

No driver is needed for the following operating system:

Summary of content (3 pages)

PAGE 1
User Manual 1. Introduction 1.1Document Description This document defines the features, performance, and manufacturing requirements for the USB 2.0 USB HUB,supporting one media standards in eight card slots. The HUB will be supplied to interface to an industry standard USB port. The HUB shall provide read and write capabilities for the following formats ：Fast data/File access and transfer rate up to 480Mbp/Sec 1.2 Purpose This document is a specification to be provided to customers to qualify the USB 2.
PAGE 2
·Microsoft – ME, 2000, XP Home and XP Pro, VISTA ·Apple – Mac 10.1.2 and above 6. Performance The HUB shall provide data throughput at a rate up to 12Mb/Sec in USB 1.1and 480 Mb/Sec for USB2.0 Link up to 127 USB Devices 7. Environmental The HUB shall not be affected by subjecting it to any (or any combination) of the following conditions during operation, storage, or shipment. 7.1 Temperature 7.1.1 Operating The HUB shall perform to specification when exposed to ambient temperatures of 0℃to 60℃. 7.1.
PAGE 3
FCC warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.