SPECIFICATION FOR APPROVAL Customer: Getac Technology Corp.
Index NO. ITEN PAGE 1. General Description 4 2. Features 4 3. 4. 4 System requirements 4 5. 5 6. 5 7. 6 8. 7 9.
1. General Description The UX10 NFC module is a highly integrated transceiver module for contactless reader/writer communication at 13.56 MHz. A dedicated Flash code is implemented to handle different RF protocols by an integrated microcontroller. The system host controller communicates with the UX10 NFC module by using the USB link. The protocol between the host controller and the UX10 NFC module, on top of this physical link is the CCID protocol 2.
Support by the following OS through the PCSC-Lite drive GNU/Linux using libusb 1.0.x and later Mac OS Leopard (1.5.6 and newer) Mac OS Snow Leopard (1.6.X) Solaris FreeBSD 5. Average Power Consumption Standby Mode: 0.12Watt Active/Read Card Mode: 0.24 Watt 6.
7. Main PCBA: 38 x 26.5 x 3.
8. VID/PID: 0x1FC9/0x0117 F/W Ver.: N/A 9. This module is powered by 5V from USB interface. Main supply voltage for internal analog modules, digital logic and memories. The 27.12 MHz crystal oscillator is used as a reference for all operations requiring high stability of the clock frequency. TX1 TX2 transmitter is able to drive an antenna circuit connected to outputs TX1 and TX2 with a 13.56 MHz carrier signal. The signal delivered on pins TX1 and pin TX2 is a 13.
10.
