V200 USER’S MANUAL Rugged Mobile Computing Solutions
Aug. 2012 TRADEMARKS The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice. Most screens and operating instructions in this manual are based on Windows 7.
may not be the same. For the latest version of the manual, please visit the Getac website at www.getac.com. ENERGY STAR® is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR® related information from www.energystar.gov.
Businesses that use ENERGY STAR® enabled office equipment may realize additional savings on air conditioning and maintenance. Over its lifetime, ENERGY STAR® qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (“sleep settings”) on computers and monitors can result in much savings annually.
Table of Contents Chapter 1 Getting Started .............................................. .............................................. 1-1 Getting the Computer Running......................................... 1-2 Unpacking ................................................................ 1-2 Connecting to AC Power ............................................ 1-3 Opening and Closing the Cover ................................... 1-4 Operating in Tablet Mode ...........................................
Numeric Keypad .......................................................2-3 Function Keys ..........................................................2-4 Fn Key ...................................................................2-4 Hot Keys ................................................................2-4 Using the Touchpad ......................................................2-7 Configuring the Touchpad............................................2-9 Navigating on the Screen ...........................
Checking the Battery Level .........................................3-4 Replacing the Battery Pack .........................................3-5 Battery Low Signals and Actions ..................................3-6 Power Management .......................................................3-8 Hibernation...............................................................3-9 Power-Saving Tips ..................................................... 3-10 Chapter 4 Expanding Your Computer ...........................
Chapter 6 Using Getac Software .................................... .................................... 6-1 Using the OSD Control Panel .........................................6-2 Quick Button Setup ...................................................6-6 Using Button Manager ...................................................6-8 Using G-Manager ....................................................... 6-10 Starting G-Manager ................................................. 6-10 System Tab ............
When Traveling ............................................................7-9 Chapter 8 ................................................. ................................................. Troubleshooting 8-1 Preliminary Checklist ......................................................8-2 Solving Common Problems .............................................8-3 Battery Problems .......................................................8-3 Bluetooth Problems ..................................................
vi
Chapter 1 Getting Started Congratulations on purchasing this rugged computer. This chapter first tells you step by step how to get the computer up and running. Then, you will find a section briefly introducing the external components of the computer.
Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: − AC adapter − AC power cord − Shoulder strap − Handgrip strap − Stylus and tether − Digitizer pen (option) − Driver disc − Documents Inspect all the items. If any item is damaged or missing, notify your dealer immediately.
Connecting to AC Power The computer operates either on the external AC power or internal battery power. It is suggested that you use AC power when you start up the computer for the very first time. CAUTION: Use only the AC adapter included with your computer. Using other AC adapters may damage the computer. 1. Plug the DC cord of the AC adapter to the power connector of the computer ( ). 2. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet ( ). 3.
When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3. Opening and Closing the Cover To open the top cover: 1. Pull loose the cover latch ( ) and release the clamp ( ). 2. Lift up the cover ( ). You can tilt the cover forward or backward for optimal viewing clarity. To close the top cover: 1. Close the display.
2. Lift the cover latch and engage the clamp on the display. cover latch to click it into place. Then, push in the Operating in Tablet Mode In addition to being used as a regular notebook computer (Laptop mode), your computer can also be operated in Tablet mode. In Tablet mode, you operate the computer with a stylus or digitizer pen, or a fingertip, instead of a keyboard or mouse. 1. Open the top cover so that it is almost perpendicular with the keyboard of the computer. 2.
4. Lift the cover latch and engage the clamp on the display. cover latch to click it into place. Then, push in the In Tablet mode, the computer can be operated while holding it as shown. A handgrip strap is supplied to help you hold the computer. (See “Attaching the Handgrip Strap” in this chapter for installation instructions.
Turning On and Off the Computer Turning On Press the power button ( ). Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Turning Off Off When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode: To... Do this... Power off (Shutdown) Use the Windows Start menu in the lower left and follow the shutdown procedure. Sleep Press the power button*.
Taking a Look at the Computer NOTE: Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual. You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for water- and dust-proof integrity. (Engage the locking mechanism if existing.) Front Components Ref Component Description See Also Strap Holder Two buckles hold the shoulder strap.
Ref Component Description See Also CAUTION: To prevent burns to your fingers if using the computer (especially in Tablet Mode) with sunlight-readable mode turned on, do wear gloves when touching the top portion of the LCD display as it may be hot to the touch. P2 Button Can be re-defined using the Button Manager utility. RF Button Serves as the master on/off control of the RF radio. P3 Button Can be re-defined using the Button Manager utility.
Rear Components Ref Component Description See Also Audio Output Connector Connects a set of headphones, external speakers with amplifier, or an audio recording device. P. 4-6 Mini IEEE 1394 Port Connects an IEEE 1394 device such as a scanner, printer, DVCAM, and VCR. P. 4-5 Microphone Connector Connects an external microphone. P. 4-6 USB 2.0 Port Connects a USB device, such as a flash disk, printer, digital camera, joystick, and more. P.
RightRight-Side Components Ref Component Stylus Description See Also Serves as the input device by tapping on the touchscreen to make selections and enter information. P. 2-10 NOTE: Some models do not have the stylus slot on this side, so you can only use the slot on the left side for storing the stylus. Tether Hole Stylus can be tethered to this hole. P. 1-17 NOTE: Depending on your model, this is on both sides of the computer or on the left side only.
LeftLeft-Side Components Ref Component Description See Also Tether Hole Stylus can be tethered to this hole. Stylus Slot Stylus can be stored in this slot. Power Connector Connects the AC adapter. P. 1-3 USB 3.0 Port Connects a USB device, such as a flash disk, printer, digital camera, joystick, and more. P. 4-4 RJRJ-11 Connector Connects the telephone line. P. 2-18 RJRJ-45 Connector Connects the LAN cable. P.
Smart Card Reader (upper) Ref Accepts a smart card for additional security feature. Component Description P. 4-11 See Also ExpressCard Slot (lower) Accepts an ExpressCard for additional functions. P. 4-7 SD Card Reader Accepts a SD/SDHC/SDXC card for removable storage media. P. 4-12 TopTop-open Components Ref Component Component Camera Lens Description See Also Allows you to use your computer’s camera function. The lens supports 2 MP (mega pixel). P.
Ref Component Component Description It can be rotated. See Also P. 2-10 Touchscreen Displays and receives information for the computer. Light Sensor Detects the surrounding lighting condition for automatic adjustment of the LCD brightness and optional keyboard backlight. Fingerprint Scanner (optional) Uses fingerprint verification to protect your computer against unauthorized access. Keyboard Serves as the data input device. P. 2-2 Touchpad Serves as the pointing device. P.
Ref Component Component Description See Also Blinks red when the optional hard disk drive heater is on for low temperature operation. P. 8-9 RF Lights when the radio frequency is on. Num Lock Lights when Num Lock is on. P. 2-3 Caps Lock Lights when Caps Lock is on. P. 2-2 Bottom Components Ref Component Description See Also Strap Holder Four bottom hooks hold the handgrip strap.
Memory Slots Inside are the memory slots for expanding the memory size of your computer. P. 4-13 SIM Card Slot (optional) Inside is the SIM card slot. P.
Using the Accessories Using the Tether A tether is provided for attaching the stylus to your computer. 1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by below). Then, insert the other end through the first loop (as indicated by below) and pull it tight. 2. Insert the other loop end to the tether hole on the computer (as indicated by below). Then, insert the stylus end through the loop (as indicated by below) and pull it tight.
Attaching the Handgrip Strap To use the handgrip strap, attach its four loops to the four bottom hooks on your computer. Make sure the loops are securely hooked. When you need to operate and hold your computer at the same time, insert your hand through the strap for a firm grip. Attaching the Shoulder Strap To use the shoulder strap, secure the snap hooks to the two buckles on your computer. (Select models have four buckles for different positioning of the strap.
CAUTION: The strap has been designed to carry only the weight of the computer. Therefore, be sure that the strap does not carry a weight that exceeds the weight of the computer. The strap may accidentally come loose from the computer. Do not use a strap that is damaged or about to tear.
Chapter 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your computer. CAUTION: Do not expose your skin to the computer when operating it in a very hot or cold environment. The computer can get uncomfortably warm when you use it in high temperatures.
Using the Internal Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus an Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys Cursor-control keys Numeric keys Function keys Typewriter Keys Typewriter keys are similar to the keys on a typewriter. Several keys are added such as the Ctrl, Ctrl Alt, Alt Esc, Esc and lock keys for special purposes.
Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next: Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTE: When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press Fn and then the letter without turning Num Lock off.
Function Keys On the top row of the keys are the function keys: F1 to F12. Function keys are multi-purpose keys that perform functions defined by individual programs. Fn Key The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. The letter “Fn” and the alternative functions are identified by the color of blue on the keytop. To perform a desired function, first press and hold Fn, then press the other key.
Key Description Increases the sound volume. Switches the display output when external devices are connected. Decreases the LCD brightness (20 levels). Increases the LCD brightness (20 levels). Switches the touchscreen on and off (option). Switches the touchpad on and off. Switches the system sound output off (mute) and on. Switches LCD backlight on and off. Serves as the sleep button that you can define with Windows’ Power Options. Options (See the “Power Management” in Chapter 3.
The Windows Logo key opens the Start menu and performs software-specific functions when used in combination with other keys. The Application key usually has the same effect as a right mouse click. (See your Windows manual for more information.
Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.
Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad. Double-click Press and release the left button twice in quick succession. –or– Tap twice on the pad rapidly. Drag and drop Press and reach your when you object will hold the left button, then move your finger until you destination (drag).
Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on. To configure the touchpad, go to Control Panel Mouse Properties.
Navigating on the Screen The screen of your computer is touch-sensitive. You can control the location of the cursor/pointer on the screen using your finger or the included stylus or digitizer pen to communicate with the computer. CAUTION: Do not use sharp objects on the LCD display. Doing so may damage the display surface. Use your finger or the included stylus or digitizer pen.
Equivalent Mouse Function Term/Action Tap and hold: Tap and hold until a popup menu appears. Right-click Drag: Hold the stylus (or finger) on the screen and drag across the screen until reaching your destination. Drag Using MultiMulti-touch Gestures If your computer model comes with multi-touch-capable screen and Windows 7, you can interact with your computer by placing two fingers on the screen. The movement of the fingers across the screen creates “gestures,” which send commands to the computer.
Gestures ( Actions = finger down; = finger up) Rotate or Move two fingers in opposing directions. -orUse one finger to pivot around another. Descriptions Use rotating to move a picture or other item on the screen in a circular direction (clockwise or counterclockwise). The gesture works in applications that support the specific gesture. Use press and tap to access the shortcut menu. Press and Tap Press on target and tap using a second finger.
Gestures ( Actions = finger down; = finger up) Flicks Make quick drag gestures in the desired direction. Descriptions Flick left or right to navigate back and forward in a browser and other applications. The gesture works in most applications that support back and forward. Using the Dual Mode Display (Optional) Dual mode display incorporates both touchscreen and digitizer functions. The display is set to Touchscreen mode by default.
Term Action Move Move the cursor pointed by the digitizer pen. Click/Point Tap gently on the display. Double-click Tap twice on the display rapidly. Drag and drop Tap lightly on the display and move your digitizer pen until you reach your destination (drag). Finally, release your digitizer pen (drop) when you finish dragging your selection to the destination. The object will drop into the new location. Right-click Press and hold down the digitizer pen button (A), then tap gently the object.
NOTE: You can move the cursor by bringing the digitizer pen close to the screen, without actually touching the screen’s surface. Do not move the digitizer pen too quickly. If the pen moves too quickly, the cursor may be unable to follow its movement. If you cannot click on the edge of the screen, hold the digitizer pen perpendicular to the display and try clicking again.
NOTE: If the screen display resolution has been set to 800×600 pixels, you can rotate the display to Primary Landscape and Secondary Landscape only. While the display is rotated: – Do not set the display resolution larger than the resolution of the LCD display. – If you exit Windows, the next time Windows is started up, the operation of the touchpad will not match the display angle for a few seconds. – The computer’s performance will decrease slightly.
Using the Input Panel Use the Input Panel to enter text and perform various keyboard functions. There are two types of Input Panels for you to use in Windows 7: Touch Keyboard allows you to enter text by tapping the keys with your stylus, like pressing the keys on a standard keyboard. Writing Pad allows you to write on the writing pad, like writing on a piece of paper. Your handwriting will be converted into typed text.
Using the Network Features Using the Modem The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board. To connect the telephone line to the modem, connect one end of the modem cable to the RJ-11 connector on the computer and the other end to the phone line. NOTE: When using the communication software, you may have to disable power management.
Using the LAN The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub. Using the Wireless LAN The WLAN module of your computer supports IEEE 802.11a/g/n.
Connecting to a Wireless Network To connect to a wireless network: 1. Make sure that the WLAN function is enabled (as described above). The Wireless Network icon on the taskbar should appear without a red X. on the taskbar. (An orange light in the icon 2. Tap the Wireless Network icon indicates connections are available.) 3. In the list of available wireless networks, tap a network, and then tap Connect. Connect 4. Some networks require a network security key or passphrase.
Using the Blue Bluetooth tooth Feature Your computer incorporates the Bluetooth 4.0 capability for short-range (about 50 meters) wireless communications between devices without requiring a cable connection. With Bluetooth, data can be transmitted through walls, pockets and briefcases as long as two devices are within range. Turning Off/On the Bluetooth Radio To turn on or off the wireless radio (including the Bluetooth radio), press the button located on the front of your computer or spress Fn+F1.
5. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth feature, see Windows’ online Help.
Using the WWAN Feature (Optional) (Optional) A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular network technologies to transfer data. The WWAN module of your computer supports 3G or 4G LTE depending on your model. NOTE: Your computer only supports data transmission; voice transmission is not supported. Installing a SIM Card To use the WWAN feature to connect to the Internet, you need to subscribe to the service and acquire a SIM card from a mobile phone network service provider.
To turn on or off the wireless radio (including the WWAN radio), press the button located on the front of your computer. A small window pops up on the screen to indicate the status. Connecting to WWAN Network 1. Make sure that the SIM card is inserted and WWAN function is enabled (as described above). 2. On Windows desktop, double-click the AirCard Watcher shortcut. The screen as below appears. 3. If the radio is currently off, click Turn Radio On to turn on the radio. 4.
Manage profiles Use GPS to track your position (for models having the GPS module) NOTE: For detailed information on using AirCard Watcher, see the program’s online help.
Using the Fingerprint Fingerprint Scanner (Optional) CAUTION: We shall not be liable for any loss or damage whatsoever resulting from your use of the fingerprint scanner or neglect of fingerprint scanner use, or any data loss resulting from such developments as fingerprint authentication malfunctioning. It is not recommended that you use the fingerprint scanner in a below-freezing temperature.
To register your fingerprint, click Start All Programs AuthenTec AuthenTec TrueSuite AuthenTec TrueSuite. TrueSuite Click the finger you want to register and follow the onscreen instructions to complete. You can then use the Fingerprint Software to set up how the fingerprint authentication works.
For detailed information, click the Help button of the software.
Chapter 3 Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
AC Adapter CAUTION: The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer. If you plan to go overseas with the computer, consult your dealer for the appropriate power cord. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer.
Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time. NOTE: Care and maintenance information for the battery is provided in the “Battery Pack” section in Chapter 7.
CAUTION: After the computer has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may damage the battery. NOTE: The battery level may automatically lessen due to the self-discharge process (0.21 % per day), even when the battery pack is fully charged (100 %). This happens no matter if the battery pack is installed in the computer.
to know the battery charge, you can press the switch with a pointed device to see the corresponding value of indicator segment that light green. Switch The value of the corresponding green segment indicates the relative percentage of the battery charge. The battery pack is fully discharged when you see no segment glowing green. Replacing the Battery Pack CAUTION: There is danger of explosion if the battery is incorrectly replaced.
4. Pull the ribbon strip to remove the battery pack. 5. With the ribbon strip facing outward, slide the new battery pack all the way into the slot. 6. Close the door. Make sure the door latch clicks into place. Then, slide the door lock toward the right. Battery Low Signals Signals and Actions Actions The battery icon Battery Icon changes appearance to display the current state of the battery.
When the battery is low, the computer’s Battery Charge Indicator ( blinks red to alert you to take actions. ) also Always respond to low-battery by connecting the AC adapter, placing your computer in Hibernation mode, or turning off the computer.
Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows, power supply to different computer components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time. In general, Windows’ power management works in this way: What... When...
Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the computer can be turned off. When you use the hibernation feature, you do not have to close the applications. The computer stores the state of your computer to a file on the hard disk and then shuts down.
PowerPower-Saving Tips Aside from enabling your computer’s power saving mode (see previous section), you can do your part to maximize the battery’s operating time by following these suggestions. Enter power saving mode when using battery power. Do not disable automatic power management features. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display. Many USB devices use power just by being connected.
Chapter 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.
Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2. Plug the monitor’s D-type signal connector to the computer’s VGA connector. 3. Plug one end of the monitor’s power cord into the power socket on the monitor and the other end to an electrical outlet. 4.
Connecting a Serial Device Your computer has one or two serial port (depending on model) for connecting a serial device such as a serial mouse or serial communication device (modem). Follow this procedure to connect a serial device: 1. Make sure the computer is not turned on 2. Plug the device cable to the serial port on the rear of the computer. 3. Turn on the computer. NOTE: Portable modems that derive power through the serial port cannot be used with the computer.
Connecting a USB Device Your computer has three USB ports (two USB 3.0 ports at the left side and one USB 2.0 port at the back) for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. USB 3.0 supports a transfer rate up to 5 Gbit/s and USB 2.0 a transfer rate up to 12 MB/s. To connect a USB device, plug the device cable to a matching USB port.
Connecting an IEEE 1394 Device Your computer has a mini IEEE 1394a port for connecting IEEE 1394 devices that include not only computer peripheral devices such as scanner, printer and high-quality CCD, but also consumer electronic equipment such as DVCAM and VCR. To connect an IEEE 1394 device, prepare an IEEE 1394 cable. Plug the appropriate end of the cable to the computer’s mini IEEE 1394 connector and the other end to the device’s corresponding connector.
Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. Audio Output Connector ( or earphone set. Microphone Connector ( ) can be connected to an external microphone for recording voice or sound. ) can be connected to speakers, headphones, NOTE: After connecting an external audio device, make sure that you specify the use of the correct audio device in Windows.
Using ExpressCards Your computer has an ExpressCard slot. The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or 34 mm (ExpressCard/34) wide ExpressCard. Typical ExpressCards support a very extensive range of applications including memory, wired and wireless communication cards, and security devices. Shown next are the appearances of ExpressCards for your reference. ExpressCard/54 ExpressCard/34 To insert an ExpressCard: 1. Locate the ExpressCard slot on the left side of the computer.
3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove an ExpressCard: 1. ) found on the Double-click on the Safely Remove Hardware icon ( Windows taskbar and the Safely Remove Hardware window appears on screen. 2. Select (highlight) the ExpressCard from the list to disable the card. 3. Push the eject button and the card will slide out slightly. 4. Pull the card out of the slot.
Using PC Cards NOTE: Some PC cards require additional system resources. Before using such PC card, you may have to free other system resources for the PC card. Although some PC cards can be inserted and removed without turning off the computer, you cannot remove or install PC cards during Sleep mode. Your computer (standard configuration) has one PC card slot that support CardBus specifications. The slots can accommodate a type II card.
3. Push the eject button and the card will slide out slightly. 4. Pull the card out of the slot.
Using Smart Cards (Optional) Your computer may have a smart card reader. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. To insert a smart card: 1. Locate the smart card slot. 2. Slide the smart card, with its label and embedded computer chip facing up into the slot. 3.
Using Storage Cards NOTE: You can use only storage cards. Your SD card reader does not support cards with I/O (input/output) functions such as a wireless network card or Bluetooth card. Your computer has an SD card reader. The card reader is a small drive for reading from and writing to removable storage cards (or called memory cards). The card reader supports SD (Secure Digital), SDHC (Secure Digital High Capacity), and SDXC (Secure Digital eXtended Capacity) cards. To insert a storage card: 1.
System Memory Upgrade You can upgrade your computer by expanding system memory. CAUTION: It is not recommended that you buy and install RAM modules by yourself. If you want to expand system memory, please ask Getac service center to install DRAM modules for you so that full compatibility can be guaranteed. RAM modules are extremely sensitive to static electricity. There are cases where static electricity generated by the human body has adversely affected such modules.
4. To install the RAM module, match the module's notched part with the socket's projected part and firmly insert the module into the socket at a 20-degree angle. Then push down until the retaining clips lock the module into position. CAUTION: If the RAM module is difficult to insert or difficult to push down, do not force it. Check once more to ensure that the module is positioned correctly. 5. Close the compartment cover and secure with four screws.
Chapter 5 Using BIOS Setup and System Recovery BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features.
BIOS Setup When and How to Use Use You need to run BIOS Setup Utility when: You see an error message on the screen requesting you to run BIOS Setup Utility. You want to restore the factory default BIOS settings. You want to modify some specific settings according to the hardware. You want to modify some specific settings to optimize the system performance. To run BIOS Setup Utility, press the F2 key when the prompt appears on the screen during the system startup.
In general, you can use the arrow keys to move around and + / – keys to change the setup values. Keyboard information can be found at the bottom of the screen. NOTE: The BIOS Setup Utility screens shown in this chapter are for your reference only. The actual items or settings on your computer may differ. The BIOS Setup Utility program may have been updated after the publication of this manual. The settings you select in your operating system might override similar settings in BIOS Setup Utility.
Main Menu The Main menu contains various system settings. Information Main Advanced Security Boot Exit Item Specific Help System Date: System Time: [05/28/2012] 05 [11:33:08] Legacy USB Support: [Enabled] F1 Help Esc Exit ĖĘ Select Item ĕė Select Menu View or set system date. +/Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit System Time sets the system time. System Date sets the system date.
Advanced Menu The Advanced menu contains the advanced settings as shown next.
iRST Support enables of disables iRST, which gets your system up and running faster. Wake Up Capability specifies events for waking up the system. Press Enter to access the submenu as shown below. Advanced Wake Up Capability Ring Wake Up From S3: USB Wake Up From S3: Wake on PCH LAN: F1 Help Esc Exit ĖĘ Select Item ĕė Select Menu [Disabled] Disabled [Disabled] [Disabled] Item Specific Help Allow a modem activity to wake up the system from S3(Sleep) state.
AMT Configuration configures Active Management Technology parameters. Press Enter to access the submenu as shown below. Advanced AMT Configuration Intel AMT: Intel AMT Setup Prompt: F1 Help Esc Exit ĖĘ Select Item ĕė Select Menu [Disable Enabled ] [Disabled] Item Specific Help Enable/Disable Intel (R) Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution.
Advanced Virtualization Technology Setup Intel(R) Virtualization Technology [Disabled] Disabled Intel(R) VT for Directed I/O (VT-d) [Disabled] F1 Help Esc Exit ĖĘ Select Item ĕė Select Menu Item Specific Help When enabled, a VMM can utilize the additional hardware capabilities.
Advanced Graphic Setup DVMT Pre-Allocated: [ 64MB] Total Graphics Memory: [256MB] F1 Help Esc Exit ĖĘ Select Item ĕė Select Menu Item Specific Help Select Pre-Allocated Graphics Memory size used by the Internal Graphics Device. This has no effect if external graphics are present. +/Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit NOTE: Graphic Setup parameters apply to the internal graphics device only.
Device Configuration enables or disables several hardware components. Press Enter to access the submenu as shown below. Advanced Device Configuration Wireless LAN: WWAN: Bluetooth: Media Card Reader: Smart Card Reader: HD Audio: Modem: Fingerprint Scanner: 1394 Port: Touch Screen: GPS: F1 Help Esc Exit [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] ĖĘ Select Item ĕė Select Menu Item Specific Help Set WLAN device to enable/disable.
Serial COM Port Configuration enables or disables the serial port. Press Enter to access the submenu as shown below. Advanced COM PORT Configuration Serial COM PORT1 Serial COM PORT2 Serial COM PORT3 F1 Help Esc Exit [Enabled] [Enabled] [Enabled] ĖĘ Select Item ĕė Select Menu Item Specific Help This option controls the Onboard COM1 Address. When enabled, COM1 uses address 0x3F8h and IRQ4.
Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. Information Main Advanced Security Boot Exit Item Specific Help Supervisor Password Is: User Password Is: Set Supervisor Password: Set User Password Password on Boot: Cleared Cleared [Enter] Enter [Enter] [Disabled] Set HDD 0 Password: HDD 0 Password: [Enter] Cleared Set or clear the Supervisor account’s password.
Enter. Enter You can set the supervisor/user password to be required for starting up the system and/or entering BIOS Setup. Password on Boot allows you to enable or disable the entering of password for booting up your system. Once the password is successfully set and this item is enabled, it is required for booting up the system. Set HDD 0 Password sets the password for locking the Primary Master hard disk drive.
Current TPM State shows the current TPM state. Change TPM State allows you to select between No Change, Clear, Deactivate & Disable, and Enable & Activate. Intel Trusted Execution Technology enables utilization of additional hardware capabilities provided by Intel® Trusted Execution Technology. Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. Information Main Advanced Security Boot Exit Item Specific Help Boot priority order: 1. SATA ODD: 2.
Key Function ↑ , ↓ Selects (highlight) a boot device. +, – Changes the boot sequence. 1 to 4 Loads the default boot sequence. Key Function f or r Specifies if the boot device is fixed (ff) or removable (rr). X Moves the highlighted boot device from the “Boot priority order” list to the “Excluded from boot order” list, and vice versa. Shift+1 Shift 1 Deactivates/activates the highlighted boot device on the “Boot priority order” list.
Exit Saving Changes saves the changes you have made and exits BIOS Setup Utility. Exit Discarding Changes exits BIOS Setup Utility without saving the changes you have made. Load Setup Defaults loads the factory default values for all the items. Discard Changes restores the previous values for all the items. Saves Changes saves the changes you have made.