User's Manual

3.When you are installing some drivers under some operating
systems, if you see the message showing "You are about to
install a third- party driver", please do not care about it. This
message only informs you that the driver you are installing is
written by the third party and it will not affect the function.
4. The system can’t support PNP function on the monitor item.
Save To Disk Utility
This "Save To Disk Utility" diskette provides the "0vmakfil.exe" file for
the user to create the "Suspend To Disk" partition on the HDD.
NOTE
The HDD must be a clean one, which has not been
partitioned before. If the HDD has any partition(s) inside,
then all the partitions need to be deleted first before the
HDD can create the partition for “Suspend To Disk”.
To create the "Suspend To Disk" partition, please follow the following
steps:
1. Turn on the computer.
2. Press "F2" to enter System Configuration Utility (SCU).
3. Select Main !Boot Sequence ! A: then C: , then click "OK".
4. Select Security ! Virus Alert (disable) ! Boot Sector Protect
(disable) , then press "Esc"