Quick Start Guide * Thanks for purchasing and using our product. Please read this quick start guide before using, and keep it for future reference. * Manual contents are subject to change without notice in accordance with our policy of continuous product improvement.
1. what’s in the box Please consult below checklist for all the components. USB Cable Video Doorbell User Guide Indoor Chime Screw & Tools Double-sided Tape 2. meet the doorbell 3 1 2 10 4 11 5 6 7 8 12 1 2MP Camera 7 Charging Indicator 2 PIR Motion Sensor 8 Micro USB Port 3 Speakers 9 4 Indicating LED 10 Wall-mount bracket Reset 5 Doorbell Button 11 SD Card Slot 6 Microphone 12 Battery Compartment 9 3.
5. Battery charging The batteries inside the doorbell are not fully charged in accordance with transportation safety regulations. Please charge the batteries with a USB compatible wall charger (not included) and the provided USB cable for about 8~10 hours prior to Wi-Fi configuration and installation. 6. Download the app Download and install the 'CloudEdge' app from Google PlayTM or the App StoreTM.
9:55 9:55 9:55 Wi-Fi Setup Install Doorbell Operation Select your Wi-Fi network (Please select a 2.4G network, this device will not work with 5G Wi-Fi networks) Home Scan QR Code Scan the QR code below with the device at a distance of 5-8 inches. A tone will be heard when successfully scanned. Change WiFi Password123 Hide Password Please remove all film from the lens. Tap Press the [Bell] button, and tap Next Next to show a QR code, and let your device Help scan the code.
9. Live view interface 1 Quit live viewing 2 Setting menu 3 Battery status 4 Volume on/off 5 HD/SD switch 6 Wi-Fi signal status 7 Stream bit rate 8 Wi-Fi signal status 9 Screenshot button 10 Speak to the scene 11 Record on the phone 12 Body detection on/off 13 Notification history 14 Cloud storage service HD 10.
11. Installation Select location 166° Your doorbell has 166-degree view angle and 120-degree human detection range. It is suggested to mount your doorbell at least 5 feet (160 cm) above the ground for the best angle of view and motion detection performance.
12. connect the chime supply power to the chime The chime can be powered by an USB compatible phone charger (DC5V 1A). You can also plug the chime to the USB port on your PC/notebook to supply power. (not included) (not in clude 1. Powered by DC5V adapter (phone charger). d) 2. Powered by PC USB Port. Pair with doorbell 1. Tap on “···” and enter into Settings-> Basic function, select Wireless Chime page.(See to Picture.
Select ringtone Enter into Settings->Wireless Chime, there are 4 ringtons available (See to Picture.6). Volume control You can control the volume level for the chime in the Wireless Chime Pairing page (See to Picture.6). Unbind 1. Press and hold reset button on the chime for about 5 seconds till the indicator flashes blue twice, and the chime will be restored to factory default. 2. You can also tap on “One-button Untie” (See to Picture.
14. Specification Video doorbell Indoor Chime Video & Audio Image Sensor General 1/2.7” CMOS (2.0MP) Hisilicon Lite-OS Power source DC 5V 1A OS Power port USB (Type-A) Resolution 1920 × 1080 px Consumption 0.2W Stream HD/SD dual stream Ringtones 4 ringtongs optional Infrared LED High power IR LED with ICR Volume Max 100dB Lense 1.7mm/F2.0 Volume control Low(mute), middle, high Angle of view 166° Connection type Radio frequency Min. illumin. Color: 0.01 Lux; B&W: 0.
15. Trouble shooting Q1: Why I failed to set up Wi-Fi for the doorbell? A1: ①.Device works with 2.4GHz Wi-Fi only, but not support 5GHz Wi-Fi. ②.Wi-Fi network is not good, try to keep the camera near the Wi-Fi router when setting up. ③.The Wi-Fi password is wrong. Please check if there are special characters in the password, or the network is specially encrypted. Q2: How do I know if I have 2.4G or 5G wifi? A2: Please check the user manual of your Router or call the network operator for help.