Insert wooden dowel (A) into part (2) as per diagram.
Insert wooden dowel (A) into part (4, 5) as per diagram. Secure cam bolt (B) to part (4,5) with Phillips head screwdriver.
Attach part (2) to part (4) using cam lock (C) with Philips head screwdriver as per diagram.
Attach part (5) to part (2) using cam lock (C) with Philips head screwdriver as per diagram.
Slide part (8) into grooves as per diagram.
Attach part (3) to part (5, 4) using screw (P) with hex key (M) as per diagram.
Attach part (12) to part (3) using bolt (N) with hex key (M) as per diagram.
Slide part (6) into grooves of part (4) as per diagram.
Slide part (7) into grooves and attach to part (6) as per diagram.
Slide part (6) into grooves of part (7, 5) as per diagram.
Attach part (1) to part (5, 4) using screw (P) with hex key (M) as per diagram.
Place sticker (D) over holes as per diagram.
Secure plastic wedge (L) to back panel using screw (K) with Philips head screwdriver as per diagram.
Attach hinge (H) to parts (10,11) using screw (J) with Phillips head screwdriver as per diagram. Attach handle part (G) to parts(10,11) suing handle bolts (F) with Phillips head screwdriver as per diagram.
Attach part (10) to part (4) using screw (J) with Philips head screwdriver as per diagram.
Attach part (11) to part (5) using screw (J) with Philips head screwdriver as per diagram.
Insert glass holder (E) into part (4, 5) as per diagram.
Loosen screw of glass holder (E), place and secure part (9) to glass holder (E) with Philips head screwdriver as per diagram.
Attach plastic strap (Q) to back of part (1) using screw (T) with Philips head screwdriver.
1. Place unit in desired location and mark the wall for plastic strap location, drill hole using 6mm size bit. 2. Insert nut (S) into wall at desired location. 3. Secure furniture to wall using plastic strap (R) and screw (R) per diagram.