Owner Manual

Table Of Contents

CARE AND MAINTENANCE

Spot clean using a mild water-free solvent. Only a professional cleaner should

undertake a complete overall cleaning.

The use of steam or water-based cleaners may cause excessive shrinking or staining.

NOTICE

* Please make sure all parts are included before you begin assembly of this item.

* This item should be assembled on a soft surface to prevent scratching the ﬁnish during

assembly

* This item may require periodic tightening

Parts List and Hardware List

WARNING: DO NOT STAND ON BENCH & TABLE

WARNING: DO NOT OVER TORQUE BOLTS/SCREWS

ID Q.tysPICTURE & DESCRIPTION ID Q.tysPICTURE & DESCRIPTION

32X

Bench: 53W x 27D x 28.5H (Inches)

Chair: 25W x 27D x 28.5H (Inches)

Table: 41.5W x 21.3D x 14.2H (Inches)

Weight Capacity: 704 lbs per bench & 55 lbs per table

Product dimension:

ASSEMBLY INSTRUCTIONS

THE DESIGN OF THE DRAWINGS MAY VARY FROM ACTUAL, BUT

ASSEMBLY CAN BE APPLIED

FOR THIS ITEM

PAGE 1
CARE AND MAINTENANCE Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining. NOTICE Product dimension: * Please make sure all parts are included before you begin assembly of this item.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly: Allen Key (included) Tighten 70% Tighten 100% Step 2: Fully tighten using Key (c) Step 1: Attach wood leg (1 & 2) to front and back of the chair respectively, using a & b.
PAGE 3
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tighten 70% Step 1: Attach wood leg (1 & 2) to front and back of the bench respectively, using a & b.
PAGE 4
Step 1: Attach wood leg (3) to frame, using a & b.